2008 Chevrolet Silverado 1500 Bodies and Fender Parts

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

• Available in blind, push-in and screw-in styles
• Constructed of high-quality materials for long-lasting durability
• Also suitable for a broad variety of industrial and commercial uses
• Packaged in a variety of piece counts for use with both small and large projects

New CAPA Certified Premium Replacement Passenger Side Fender

Product Features:

• Made Of Galvanized High Strength Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

The front crossmember supporting the fuel tank on certain extended- and crew-cab Chevrolet Silverado and GMC Sierra 1500 Series trucks can rust, which can spread to the frame and ultimately cause a failed inspection and an unsafe vehicle. Fabricating a replacement crossmember is a labor-intensive job outside the comfort zone of most vehicle owners, and the dealer solution – replacing the entire frame – is very expensive. This Dorman OE FIX fuel tank crossmember is designed to save time and money and is engineered to match the fit and function of the original equipment part. This repair requires grinding off existing weld points on the frame to prepare it for welding on the new crossmember, which is coated with a corrosion-resistant finish for durability. After installation, just spot-paint the weld points and heat-affected areas of the crossmember and frame as needed for protection against the elements.

Product Features:

• Ideal solution – this fuel tank crossmember is designed to save the expense of buying a whole new frame, or the time needed to fabricate a replacement for a rusted crossmember
• Application-specific – engineered to match the fit and function of the original front fuel tank crossmember on specified Chevrolet Silverado and GMC Sierra 1500 Series trucks
• Welding required – the installation of this part requires grinding off existing weld points on the frame prior to welding on the new crossmember
• Rugged construction – manufactured from high-strength quality steel and coated with a corrosion-resistant finish for added durability under the toughest conditions

New, Standard Replacement Flex Edge, With 3/4 Lip, 36 X 3

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Or Modifications Needed For Installation
• Same Form Fit As OE

Protect your vehicle from rocks and road debris while adding customized style to your vehicle. Each rocker panel kit includes custom panels to fit both sides of the vehicle. Made of high quality polished 304 stainless steel.

Product Features:

• Protect Your Vehicle From Rocks And Road Debris While Adding Customized Style To Your Vehicle
• Each Rocker Panel Kit Includes Custom Panels To Fit Both Sides Of The Vehicle
• Made Of High Quality Polished 304 Stainless Steel
• Installs Easily With Pre-Applied 3M Automotive Tape

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Assures Longer Lasting Cab to Bed Alignment
• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:

• No-drill, vehicle-specific application for a custom fit
• Compatible with 6″ oval track mounting system for easy, secure installation
• Heavy-duty steel construction with a durable black powder coat finish

New ProEFX Rear Roll Pan, With License Plate Lamp And Hardware

Product Features:

• With License Plate Lamp And Hardware
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Rocker Panel, Standard Cab, 49 X 12

Product Features:

• Standard Cab Models, 49 X 12, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
• Quality material – this retainer is made of durable material for long-lasting service.
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Putco Fender Trim is the easiest way to create a custom look for your truck, SUV, or car. Designed for reliable durability and style, this trim features a stainless steel construction and installs directly to your truck without modification. Our fender trim in Stainless Steel and Black Platinum finish that combines the bright styling of chrome with the intensity of black for a uniquely deep finish. Pair them with any number of Putco trim pieces to create bold and dominating appearance.

Product Features:

• Enhances The Look Of Your Vehicle For A True Custom Look
• Made Of 304 Stainless Steel
• Features UV Resistant Rubber Edge Trim For A Customized Fit
• Complete The Chrome Look By Adding Mirror, Head Lamp, And Tail Light Covers
• Easy To Install Using Stainless Steel Hardware

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

• Needa Parts offers a complete assortment for all popular makes and models
• Vehicle make specific fastener kits are available
• All fasteners meet or exceed OEM standards

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for long-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicle contours for a sleek and stylish look. With TrailFX step products, a custom look does not have to break the bank.

Product Features:

• Rocker Panel Mount
• T304 Marine-Grade Stainless Steel Ensures Maximum Strength And Durability: Extra-Large Molded Step Pads Provide Slip-Resistant Entry Points To The Cab And Truck Bed
• Complement The Look Of Longer Wheel-Base Trucks And Fit Wheel Opening To Wheel Opening: Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Steel Mounting Brackets Are Included To Install Steps With Ease
• Provides Moderate Protection Against Road Hazards And Debris

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Driver Side Rear Fender Flare, Matte-Black Texture

Product Features:

• Matte-Black Texture, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Driver Side Fender Liner, Avalanche 1500 Without Textured Cladding

Product Features:

• Avalanche 1500 Without Textured Cladding, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Economy Replacement Rear Step Bumper Assembly, Chrome, Without Park Assist Sensor Holes, For 1500 Series, Includes Hitch Reinforcement/Impact Bar/Chrome End Caps/Outer Pads/ Brackets/Braces And Light

Product Features:

• Chrome, Without Park Assist Sensor Holes, For 1500 Series, Includes Hitch Reinforcement/Impact Bar/Chrome End Caps/Outer Pads/ Brackets/Braces And Light, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Damaged or missing spare tire hoist cover? This direct replacement spare tire hoist access hole cover matches the original equipment part to keep debris from getting into the guide tube.

Product Features:

• Direct replacement – this spare tire hoist access hole cover matches the fit and function of the original equipment part
• Easy to install – no special tools required to install this spare tire hoist support
• Durable materials – manufactured from sturdy materials for a reliable service life
• Quality fit – this spare tire hoist access hole cover has been vehicle tested to ensure accurate fit and function

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Passenger Side Fender Brace, Rear Upper Bracket

Product Features:

• Rear Upper Bracket, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Driver Side Rear Upper Wheel Arch Patch, 12 1/4 X 37

Product Features:

• 12 1/4 X 37, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This replacement console lid restores the appearance and function of a worn or damaged original equipment lid. Made of durable materials, this direct replacement part is designed for long-lasting durability.

Product Features:

• Ideal replacement – this console lid matches the fit and function of the original equipment lid
• Durable construction – this console cover is made from quality materials for durability
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

Westin’s SG6 Running Boards feature textured slip resistant step pads enhancing footing in virtually all weather conditions. SG6 Running Boards also include a rocker panel gap strip to provide users with the appropriate Westin finished look. A polished aluminum finish with a protective anodized coating prevents oxidation increasing durability and extending product life. A vehicle specific mount kit is required and sold separately. The SG6 LED Light Kit is also available and sold separately. Choose Westin’s SG6 Running Boards for the perfect balance between safety, function and style!

Product Features:

• Vehicle Specific Mount Kit Required; Sold Separately
• Stylish Modern Design
• 5 1/2 in. Step Surface Width
• Corrosion Resistant Extruded Aluminum Board
• Injection Molded End Caps
• Slip Resistant Textured Step Surface
• Rocker Panel Gap Strip Included For Finished Look
• Optional Light Kit For End Caps PN[27-60000]

RB SUMMIT RIDGE 2.0 BLACK