2008 Chevrolet Malibu Ignition Coils and Boots

Essential 2008 Chevrolet Malibu Ignition Coils and Boots

DENSO – Spark Plug Wire Set: Carbon Core, 7 Wire Set (Part No.671-6044)

Spark Plug Wire Set: Carbon Core, 7 Wire Set

from

$39.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

MSD Ignition – Wire Set; Black Super Conductor; Big Block Chevy; Socket (Part No.31373)

Wire Set; Black Super Conductor; Big Block Chevy; Socket

from

$158.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

MSD Ignition – Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor (Part No.31243)

Wire Set; Black Super Conductor; Small Block Chevy with L.P. Distributor

from

$145.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Less than 50 ohms per foot for superior spark
  • Ferro-magnetic impregnated core creates an effective EMI choke
  • 40 ft. Of Conductor Wound Into A Single Foot Of Wire
  • For high EMI suppression
  • Conductor core features Dupont Kevlar material
  • Proprietary compound sleeves for resistance to high heat/abrasion
See More

Accel – GM Bb 396-502 Hei (Part No.9013C)

GM Bb 396-502 Hei

from

$181.99
ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerance, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit.

Product Features:
  • Ceramic boots withstand up to 2,000░ Fahrenheit
  • Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Universal And Custom Fit Applications
See More

ACDelco – GM Original Equipment Ignition Wire Set (Part No.F1020323275ACD)

GM Original Equipment Ignition Wire Set

from

$77.37
Built to match the original equipment in length and fit, ACDelco OES Ignition Wire Sets also offer a performance advantage over many aftermarket products.

Product Features:
  • ACDelco OES wire sets are designed to be like Original in critical areas such as cable length and diameter, terminal design and insulator position
  • Have broad coverage available for most vehicles on the road today from 1980 to present
  • Provide a high degree of Radio Frequency Interference (RFI) suppression
  • Are designed to offer fit, form and function for optimum performance
  • Kevlar reinforced fiberglass core in select sets for increased strength
  • Core sheathed in radio-static absorbent material for increased RFI suppression
  • Wire-wound, stainless steel alloy conductor for maximum spark delivery and RFI suppression on most applications
  • A layer of conductive heat-resistant latex for added durability
  • Insulating rubber-based compound inner jacket helps minimize voltage drop and enhance durability
  • Thick silicone outer jacket for excellent heat resistance
  • Limited lifetime warranty*
See More

Accel – GM Sb Hei 86-75 Under Vlv Cvr-Black (Part No.9018CK)

GM Sb Hei 86-75 Under Vlv Cvr-Black

from

$175.99
Do you want to put headers on your vehicle, but are afraid you may cook the spark plug wires? Just looking for a nice upgrade for your stock spark plug wires? If you answered yes to any of these questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the black Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.

Product Features:
  • Black Ceramic boots withstand up to 2,000░ Fahrenheit
  • Black Ceramic boots withstand up to 2,000° Fahrenheit
  • 8mm double silicone construction black wire rated at 600░ F rated
  • 8mm double silicone construction black wire rated at 600° F rated
  • 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
  • Universal and custom fit applications
  • Stainless Steel Plug Terminals
See More

MSD Ignition – Wire Set; Super Conductor; Chevy 454; HEI; 74-76; (Part No.31369)

Wire Set; Super Conductor; Chevy 454; HEI; 74-76;

from

$158.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.

Product Features:
  • Custom Fit For Make And Model Listed
  • Wires Are Pre-Cut To Exact Specifications
  • Bolt-on Performance
  • Conductor core features DuPont Kevlar material for increased tensile strength
  • Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
  • Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
See More

DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8007)

Spark Plug Wire Set: Carbon Core, 8 Wire Set

from

$61.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Spark Plug Wire Set: Carbon Core, 8 Wire Set (Part No.671-8027)

Spark Plug Wire Set: Carbon Core, 8 Wire Set

from

$73.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Coil On Plug Boots-4 (Part No.671-4298)

Coil On Plug Boots-4

from

$90.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

DENSO – Coil On Plug Boots-6 (Part No.671-6307)

Coil On Plug Boots-6

from

$66.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:
  • OE design ensures a tight boot seal that protects against moisture intrusion
  • High temperature resistant material provides greater protection against thermal overload
  • Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
  • Engineered to the specifications used by the original vehicle manufacturer for an exact fit
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set (Part No.671-6046)

Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set

from

$49.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set (Part No.671-6070)

Spark Plug Wire Set: Aluminum Steel Core, 6 Wire Set

from

$66.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8045)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$42.49
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest – Ignition Coil (Part No.E70)

Ignition Coil

from

$39.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Manufactured with copper windings and permanent magnets to ensure strong signal emission and improved performance
  • High temperature enameled wires were specified for better insulation and performance
  • A full E-Lam core of silicon steel and solid brass high voltage terminals protects against corrosion. Our ignition coils are built for maximum output voltage
  • Primary and Secondary windings feature enamel magnet wire for the highest temperature rating in the aftermarket
  • As a tier I manufacturer with engineering and design capabilities second to none, our ignition coils are made to the highest quality standards
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1041)

Ignition Coil: Meets OE Specifications, 1 Count

from

$35.49
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle’s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Carquest – Ignition Coil (Part No.E991)

Ignition Coil

from

$47.05
BWD® is an aftermarket leader, providing a premium line of engine management products. BWD® manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD® is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Motorcycle Wire Set
  • Electronic ignition module profile and feedback signal ensures proper OE fit, form, and function
  • Thermoplastic housing withstands heat stress for enhanced durability
  • Internal core made from grain-oriented electrical steel limits loss factor within magnetic circuit to reduce heat that may reduce coil endurance
  • External core made from oriented silicon steel ensures durability and longevity
  • Stainless steel spring resists corrosion
  • Tin-plated brass terminals improve electrical contact and protect against corrosion
  • High-dielectric epoxy injected into case and pulled into vacuum to eliminate air pockets and prevent moisture intrusion or thermal breakdown
See More

Carquest – Ignition Coil: Meets OE Specifications, 1 Count (Part No.26C1065)

Ignition Coil: Meets OE Specifications, 1 Count

from

$29.99
Carquest ignition coils meet original equipment (OE) fit, form and function and are built to ensure reliable starting and performance. Carquest ignition coils are tested to ensure proper spark and perfect fit for each application. These ignition coils are an affordable repair choice to restore the vehicle¿s ignition system performance. Carquest ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Long service life and durable performance
  • High dielectric strength for reliability
  • Corrosion-resistant connections
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
  • High reliability
  • Long service life
See More

Delphi – Ignition Coil (Part No.GN10111)

Ignition Coil

from

$189.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.

Product Features:
  • Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
  • Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
  • Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
  • We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
See More

ACDelco – Ignition Coil (Part No.D504A)

Ignition Coil

from

$99.99
An ACDelco Professional, premium aftermarket Ignition Coil is a high quality replacement for many vehicles on the road today. It increases electrical system voltage to help ignite the air/fuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco Professional Ignition Coil uses pure copper windings to improve durability and provides higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the ignition coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This premium aftermarket replacement ignition coil is manufactured to meet your expectations for fit, form, and function.

Product Features:
  • High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
  • Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
  • Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count (Part No.EBC1831-4)

Ignition Coil Set: Meets or Exceeds OE Specifications, 4 Count

from

$141.99
Carquest Premium ignition coil sets meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coil sets are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coil sets with an industry-leading warranty. Carquest Premium ignition coil sets are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:
  • Built by IATF 16949 certified manufacturers for consistent durability
  • Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
  • Segmented secondary bobbins to distribute high voltage and prevent shorting
  • Extensive design validation testing to ensure long-lasting reliability
  • 100% end-of-line tested to ensure proper performance
  • Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
See More

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1125)

Engine Camshaft Position Sensor Connector

from

$33.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Distributor Connector (Part No.FAA1133)

Distributor Connector

from

$54.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Ignition Coil Connector (Part No.PTA1539)

Ignition Coil Connector

from

$73.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

2008 Chevrolet Malibu Ignition Coils and Boots

Maybe you’re in the middle of a full rebuild of that 2008 Chevrolet Malibu. Maybe you just need a couple of Ignition Coils and Boots. Either way, Advance Auto Parts has 31 different Ignition Coils and Boots in our inventory ranging from $9.49 to $299.99. That means you can find the exact parts or products you need to keep that 2008 Chevrolet Malibu running smoothly.

Ignition Coils and Boots are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Chevrolet Malibu. Carquest, Carquest Premium, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Ignition Coils and Boots for your 2008 Chevrolet Malibu, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 143 reviews in this category, some of the top rated parts include Coil on Plug Coil with 3.7 stars.

So if you’re in the market for aftermarket Ignition Coils and Boots to keep your 2008 Chevrolet Malibu rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Ignition Coils and Boots Brands To Make Your 2008 Chevrolet Malibu Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Chevrolet Malibu demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Coils and Boots make up Advance Auto Parts’ inventory, and all are ready to help make your Malibu the best it can be. Be sure to browse some of our top Ignition Coils and Boots brands and parts.

Popular Carquest Ignition Coils and Boots

We carry Carquest parts in our stock across Ignition Coils categories, plus more. For a 2008 Chevrolet Malibu, our most popular Carquest Ignition Coils and Boots include:
Ignition Coil
from $67.05
(9)
Ignition Coil
Ignition Coils
Ignition Coil
from $47.05
(13)
Ignition Coil
Ignition Coils
Ignition Coil
from $82.99
(15)
Ignition Coil
Ignition Coils

FAQs for 2008 Chevrolet Malibu Ignition Coils and Boots

What are the most purchased Ignition Coils and Boots for the 2008 Chevrolet Malibu?

Out of 31 Ignition Coils and Boots for the 2008 Chevrolet Malibu, the most popular in our inventory are:
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
from $43.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
from $68.99
This product is not rated
Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece
Ignition Coils
Coil on Plug Coil
from $66.05
This product is not rated
Coil on Plug Coil
Ignition Coils

What are the top-rated 2008 Chevrolet Malibu Ignition Coils and Boots?

Top-rated Ignition Coils and Boots for your 2008 Chevrolet Malibu based on customer reviews/ratings are:
Coil on Plug Coil
from $46.05
(3)
Coil on Plug Coil
“So far work fine, fixed a misfire code I was having”