2008 Chevrolet Malibu Body Parts

Below you will find various in-demand Chevrolet Body Parts, components and accessories for your 2008 Malibu. Advance Auto Parts has popular Malibu parts like Vehicle Windows, Vehicle Hoods, Vehicle Latches and Handles and more. You’ll also find aftermarket and OEM Body Parts for other Malibu model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2008 Chevrolet Malibu Body Parts below and start saving instantly.

Popular 2008 Chevrolet Malibu Body Parts Categories

Fender Molding Retainers

Hood Panels

Hood Latch Assemblies

Fender Liner Retainers

Power Window Switches

Splash Shield Retainers

Exterior Door Handles

Interior Door Handles

Door Molding Retainers

Grille Retainers

Bumper Cover Reinforcements

Door Lock Solenoid Connectors

Bumper Impact Bars

Rocker Panel Molding Retainers

Door Mirror Glass Assemblies

Custom Mirrors

Grille Moldings

Door Ajar Switch Connectors

Door Lock Switches

Grille Mounting Panels

Bumper Pad Retainer Strips

Fender Splash Shields

Bumper Cover Supports

Bumper Impact Absorbers

Mirror Replacement Glass

Exterior Door Handle Covers

Side Body Panel Moldings

Hood Hinges

Console Clips

Weatherstrip Fasteners

Front End Covers

Power Window Switch Connectors

Door Harness Connectors

Body Side Molding Clips

Door Ajar and Interior Light Switch Connectors

Sunroof Relays

Sunroof Switch Connectors

Door Jamb Switch Connector

Door Lock Motor Connectors

Trunk Lid Release Actuator Solenoid Connectors

Hood Scoop Clip

Deck Lid and Hatch Release Switch Connectors

Door Courtesy Lamp Connectors

Remote Control Door Lock Receiver Connectors

Trunk Lid Release Switch Connectors

Roof Accessory Harness Connector

Essential Body Parts for 2008 Chevrolet Malibus

from

$90.99

With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Premium Replacement Front Center Grille Surround Molding, Chrome. It is Designed to Replace Your Existing Grille Molding. Check to Be Sure it Fits Your Vehicle.

Product Features:

Chrome, Made Of ABS Thermoplastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$355.99

New CAPA Certified Premium Replacement Front Bumper Cover Reinforcement Bar

Product Features:

Made Of Aluminum
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$37.49

Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$69.99

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

Made in USA
Exact Fit
Safety Smooth Edges
Replaces OE Mirror
Premium Mirror Glass
Break-Free Guarantee
Instructions Included

from

$53.99

New Standard Replacement Front Bumper Lower Deflector [3-Pieces]

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$47.99

Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Driver side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
Mirror glass has manual remote adjustment
Spring loaded mechanism to avoid impact damage
Black
Superior material and manufacturing process ensures the highest quality possible

from

$33.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$2.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$31.99

New Standard Replacement Driver Side Front Inner Fender Panel, Air Deflector

Product Features:

Air Deflector, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$70.99

New CAPA Certified Premium Replacement Rear Bumper Valance, For Single Exhaust 2.4L Engine, Matte-Dark Gray

Product Features:

For Single Exhaust 2.4L Engine, Matte-Dark Gray, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$161.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing ¿ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ¿ in the part design process ensures speed-to-market and a precise fit guaranteed.
Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$55.99

Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$34.99

Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:

Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
Versatile component – this connector can be used in a variety of repairs and custom installations

from

$16.99

Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:

Heavy Gauge Steel Body
Self-Cleaning Piston Assembly
Rubber O-Ring Piston Seal

from

$34.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$4.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$4.99

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

Available in blind, push-in and screw-in styles
Constructed of high-quality materials for long-lasting durability
Also suitable for a broad variety of industrial and commercial uses
Packaged in a variety of piece counts for use with both small and large projects

from

$40.49

Replacement Mirror Glass Assembly. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.

Product Features:

Replace your cracked or broken driver side Mirror glass at a fraction of the dealer cost
Original equipment quality, fit and function
Includes Backing Plate
Step-by-step instructions for easy installation

from

$28.99

This jounce bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$43.99

GM Genuine Parts Trunk Lid Release Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$15.29

This exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$25.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$24.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$343.99

New CAPA Certified Premium Replacement Rear Bumper Cover Reinforcement Bar

Product Features:

Made Of Ultra-High Strength Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$141.99

This trunk lock actuator motor matches fit and function of the original equipment actuator motor to restore proper trunk latch functions. Designed as a direct replacement, this part plugs into the factory wiring.

Product Features:

Ideal replacement – this trunk lock actuator motor matches the fit and function of the original actuator motor to restore trunk latch functions
Simple installation – this actuator motor features factory-style connectors and plugs into the original wiring harness
Cost-effective solution – offers original equipment function at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$499.99

New CAPA Certified Premium Replacement Rear Bumper Cover, With Holes For Chrome License Plate Frame, Prime Paint To Match, Fits All But 2011-2012 Ls Models

Product Features:

With Holes For Chrome License Plate Frame, Prime Paint To Match, Fits All But 2011-2012 Ls Models, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$146.99

New CAPA Certified Diamond Premium Replacement Rear Bumper Impact Absorber

Product Features:

Made Of Polypropylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Upgrade your 2008 Chevrolet Malibu with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2008 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Body Parts are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 184 Body Parts for the 2008 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Vehicle Window replacements to Vehicle Hoods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2008 Chevrolet Malibu at great prices. Our Body Parts inventory for this model ranges from just $0.99 to $634.99, with an average price of $74.68. Our 184 Body Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2008 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chevrolet Malibu, we stock popular OEM and aftermarket Body Parts from top names like StrongArm, GM Genuine, Dorman, and more. StrongArm Body Parts start at just $25.49 and boast an impressive 4.5 stars average rating from customers. GM Genuine and Dorman also bring quality to the table, with Body Parts available starting at $4.99, and at an average 4.5 stars rating. With 176 customer reviews and counting, our 2008 Chevrolet Malibu Body Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 2008 Chevrolet Malibu!

Best-Selling Vehicle Windows for 2008 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 12 quality Vehicle Window components, starting at $96.99.

show more show less

from

$152.99

AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.

Product Features:

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$148.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$145.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$140.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$136.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$136.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$135.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$132.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$125.99

This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$122.99

100% new with many improvements from factory design.
Designed and manufactured to meet OE standards.
Strict quality control to ensure perfect fit.

from

$116.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

from

$96.99

Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit

Top Picks for 2008 Chevrolet Malibu Vehicle Latches and Handles

Upgrade Chevrolet Malibus with top-quality Vehicle Latches and Handles parts, including 23 OEM and aftermarket selections for your 2008 model.

show more show less

from

$54.99

Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$33.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$167.99

Hood no longer opening or closing properly? This replacement hood latch assembly matches the fit and function of the original equipment hood latch and is made of corrosion-resistant materials for reliable service.

Product Features:

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$55.99

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$36.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$32.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$59.99

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$40.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$16.49

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.29

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$137.99

Direct replacement – this hood latch assembly matches the fit and function of the original equipment latch
Durable construction – corrosion-resistant housing enhances this latch’s durability and prevents functional deterioration
Easy installation – requires no special tools to replace
Quality tested – this part has undergone vehicle fitment and material testing to ensure proper fit and reliable service

from

$96.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$58.99

Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Excellent value – original equipment quality at a lower price
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$57.99

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$55.99

A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.

from

$53.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$37.49

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$36.49

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$34.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.49

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$30.49

Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace

from

$17.99

Direct replacement – this exterior door handle reinforcement is designed to match the fit and function of the original reinforcement on specified vehicles
Restores functionality – this handle reinforcement is made to fully restore appearance and functionality after the original reinforcement fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

In-Demand Vehicle Doors for 2008 Chevrolet Malibus

Select from 15 premium Vehicle Doors parts for your 2008 Chevrolet Malibu, with prices ranging from $1.29 to $162.99.

show more show less

from

$1.29

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$68.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$34.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$64.99

This door lock switch is designed to match the appearance and function of the original switch on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this door lock switch is made to match the fit and performance of the original switch on specific vehicle applications
Ideal solution – this switch is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$162.99

This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:

Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
Safety compliant – part has undergone simulated crash testing under government guidelines
Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years

from

$23.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$23.99

GM Genuine Parts Door Lock Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$134.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$73.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$61.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$46.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$24.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$10.49

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Most Sold 2008 Chevrolet Malibu Bodies and Fender Parts

Explore our best-selling Chevrolet parts for the 2008 Malibu among 39 OEM and aftermarket options starting from $0.99.

show more show less

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost
Pack of 3

from

$4.99

Available in blind, push-in and screw-in styles
Constructed of high-quality materials for long-lasting durability
Also suitable for a broad variety of industrial and commercial uses
Packaged in a variety of piece counts for use with both small and large projects

from

$5.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$5.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$2.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$5.29

Constructed of high-quality materials for long-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$70.99

New CAPA Certified Premium Replacement Rear Bumper Valance, For Single Exhaust 2.4L Engine, Matte-Dark Gray

Product Features:

For Single Exhaust 2.4L Engine, Matte-Dark Gray, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$65.99

New CAPA Certified Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

New Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$2.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$78.99

New CAPA Certified Standard Replacement Rear Bumper Valance, 3.6L Engine, Matte-Gray, With Dual Exhaust

Product Features:

3.6L Engine With Dual Exhaust, Matte-Gray, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$156.99

Coat to Coast International body side molding is a stylish accessory that compliments any vehicle. Durable ABS plastic is chrome plated for lasting shine. Side moldings install effortlessly with automotive grade 3M tape. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:

Constructed From High-Quality, Durable, Automotive Grade ABS
Two Layers Of Clear Coat Enhance And UV Protect The Finish
Quickly And Affordably Upgrades The Trim Level Appearance Of A Vehicle
Installs In Minutes Without Tools Using Pre-Applied Automotive Grade 3M Tape
Easy Installation
Mount with 3M Tape

from

$465.99

New Economy Replacement Passenger Side Fender, Bow Tie In Bumper, New Style Malibu, With Turn Signal Hole

Product Features:

Bow Tie In Bumper, New Style Malibu, With Turn Signal Hole, Made Of Steel
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$159.99

LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:

Full front end coverage
Custom fit exactly to your vehicle
Installs easily with no drilling or tools
Leather grain vinyl
Protect against rock chips, bugs and road tar
Soft inner layer

from

$69.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$65.99

New CAPA Certified Standard Replacement Driver Side Fender Liner

Product Features:

Made Of Polyethylene
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$57.99

New Standard Replacement Passenger Side Fender Liner

Product Features:

Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

Top-Rated Body Parts Brands For Your 2008 Chevrolet Malibu

Shop for the best-rated brands offering Body Parts and other products for your 2008 Chevrolet Malibus. Below you’ll find some of our best rated Body Parts from StrongArm, GM Genuine, and Dorman, and more. Body Parts from these brands that fit a 2008 Malibu start at just $4.99 and are rated as high as 4.5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular StrongArm 2008 Chevrolet Malibu Body Parts

When it comes to maintaining or upgrading your 2008 Chevrolet Malibu, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2008 Chevrolet Malibu. With over 2 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $25.49, with an average price of just $30.74. Plus, with over 11 customer reviews and an average rating of 4.5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $25.49

(9)

Hood Lift Support: 19.62" Ext Length, 7.5" Travel, 72 Lbs of Force, 1 Pk

“to hold engine hood open.”

from $35.99

(2)

Trunk Lift Support: 12.36" Ext Length, 3.75" Travel, 84 Lbs of Force, 1 Pk

“They work great”

Popular GM Genuine 2008 Chevrolet Malibu Body Parts

GM Genuine auto parts is one of the highest quality Body Part brands in the market. Any 2008 Chevrolet Malibu owner should feel confident when installing genuine GM Genuine parts in their vehicle. To ensure the best fit and performance for your 2008 Malibu, Advance Auto Parts carries a full inventory of 1 GM Genuine Body Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these GM Genuine Body Parts range up to $43.99, plus, with more than 1 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.

from $43.99

(1)

Trunk Lid Release Switch

“Is exact replacment part. Fits and works as the original did”

FAQs for 2008 Chevrolet Malibu Body Parts

Which Body Parts are best-sellers for 2008 Chevrolet Malibus?

Out of 184 Body Parts that fit 2008 Chevrolet Malibus, the following parts are the top sellers:

Chrysler, Ford, GM Panel Retainer, Pack of 3 (11911131) – $4.99
GM Trim Panel Clip (11910800) – $4.99
Chrysler, GM Push Rivet (11910661) – $4.99

What’s the price range for 2008 Chevrolet Malibu Body Parts?

Body Part prices for the 2008 Chevrolet Malibu start at $0.99 and go up to $634.99 for the most premium parts.

What’s the average price of a Body Part for a 2008 Chevrolet Malibu?

The average price for Body Parts for the 2008 Chevrolet Malibu is $74.68. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Chevrolet Malibu model years?

Yes, we currently carry Body Parts for 42 model years of Chevrolet Malibus between 1964 and 2025. Body Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Body Parts for my 2008 Chevrolet Malibu?

The cheapest 2008 Chevrolet Malibu Body Parts we carry in stock are:

Panel Trim Retainer, Interior, GM/Ford/Chrysler (Sold by each) (22141968) – $0.99
Panel Trim Retainer – Interior – Ford (sold by each) (22141955) – $1.29
Blind Rivet Retainer-GM-Diameter 3/16 In. (sold by each) (11224079) – $1.29
Windsheild Garnish Clip-exterior-GM (sold by each) (11224154) – $1.29
Panel Trim Retainer – Interior – GM/Chrysler (9110488) – $2.79

What are the top-rated Body Parts that fit the 2008 Chevrolet Malibu?

Out of 176 reviews by customers, our 2008 Chevrolet Malibu Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2008 Chevrolet Malibu and their top-rated products:

Vehicle Hoods
- Trunk Lift Support: 12.36" Ext Length, 3.75" Travel, 84 Lbs of Force, 1 Pk (10169672) – $35.99
- Hood Lift Support: 19.62" Ext Length, 7.5" Travel, 72 Lbs of Force, 1 Pk (10169388) – $25.49

What types of Body Parts do you sell for my 2008 Chevrolet Malibu?

As of 11/2/25, these are some of the most in-demand types of Body Parts for a 2008 Chevrolet Malibu:

Can I get help with 2008 Chevrolet Malibu Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Body Parts and more.

What is your return policy for Chevrolet Malibu Body Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Chevrolet Malibu Body Parts

KAI – New CAPA Certified Premium Replacement Front Center Grille Surround Molding, Chrome (Part No.GM1210115PP)

KAI – Bumper Cover Reinforcement (Part No.GM1006673DSC)

Dorman – Help – Interior Door Handle (Part No.81874)

Burco – Heated Side View Mirror Replacement (Part No.5296H)

KAI – Bumper Deflector (Part No.GM1092236)

K-Source – Mirror Assembly: Driver Side, Manual Remote Adjustment, Foldable, 1 Pk (Part No.62560G)

Carquest Premium – Multi-Use Connector (Part No.PTA1379)

Dorman – Push In Nylon Rivet – .250 In. (Part No.45822)

KAI – Air Dam (Part No.GM1248228)

KAI – Valance Panel (Part No.GM1195110PP)

Carquest Premium – Sunroof Relay (Part No.SBA8004)

COAST TO COAST – Gloss Black Abs, With Driver Side, Without Passenger Side Keyhole (Part No.CCIDH68523BBK)

Dorman – 7-Wire Pigtail Connector (Part No.84645)

StrongArm – Trunk Lift Support: 9.82" Ext Length, 3.46" Travel, 191 Lbs of Force, 1 Pk (Part No.F4002)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2712)

Dorman – GM Trim Panel Clip (Part No.963-211D)

Dorman – GM Blind Rivet Retainer – Diameter 3/16 In. (Part No.963-205D)

K-Source – Passenger Car Replacement Mirror: Driver Side, Flat, Includes Backing Plate (Part No.88206)

Dorman – Position Jounce Bumper (Part No.523-238)

GM Genuine Parts – Trunk Lid Release Switch (Part No.15835338)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81107)

Carquest Premium – Multi-Use Connector (Part No.PTA2575)

Carquest Premium – Multi-Use Connector (Part No.PTA2602)

Dorman – Nylon Bumper Fender Retainer (Part No.961-363D)

KAI – Bumper Cover Reinforcement (Part No.GM1106670DSC)

Dorman – Integrated Door Latch Actuator (Part No.940-109)

KAI – Bumper Cover (Part No.GM1100816PP)

KAI – Bumper Impact Absorber (Part No.GM1170214DSC)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-040)

AISIN – Power Window Regulator Assembly with Motor (Part No.RPAGM-154)

AISIN – Power Window Regulator Assembly with Motor (Part No.RPAGM-060)

AISIN – Power Window Regulator Assembly with Motor (Part No.RPAGM-059)

AISIN – Power Window Regulator Assembly with Motor (Part No.RPAGM-155)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-039)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-096)

AISIN – Power Window Regulator Assembly with Motor (Part No.RPAGM-062)

Dorman – Power Window Regulator (Regulator Only) (Part No.749-533)

AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-095)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-985)

Dorman – Window Regulator: Power, 1 Pack (Part No.749-532)

StrongArm – Trunk Lift Support: 12.36" Ext Length, 3.75" Travel, 84 Lbs of Force, 1 Pk (Part No.E6167)

StrongArm – Hood Lift Support: 19.62" Ext Length, 7.5" Travel, 72 Lbs of Force, 1 Pk (Part No.D6166)

Dorman – GM Molding Retainer (Part No.963-567D)

KAI – Hood Panel (Part No.GM1230380PP)

KAI – Hood Panel (Part No.GM1230380V)

KAI – Hood Hinge (Part No.GM1236131)

KAI – Hood Hinge (Part No.GM1236132)

Dorman – Ford Trim Panel Retainers (Part No.963-022)

Dorman – Help – Exterior Door Handle Rear Left Chrome, With Pearl Coat (Part No.82012)

Dorman – Help – Exterior Door Handle Front Left Chrome (Part No.81998)

Dorman – Hood Latch Assembly (Part No.820-200)

COAST TO COAST – Chrome Plated, Abs, With Driver Side Keyhole/ Without Passenger Side Keyhole (Part No.CCIDH68523B)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81103)

Dorman – Help – Exterior Door Handle (Part No.80338)

Dorman – Help – Interior Door Handle (Part No.81870)

Dorman – Help – Exterior Door Handle (Part No.83196)

Dorman – Help – Reinforcement Bracket Exterior Door Handle (Part No.81108)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81107)

Dorman – Hood Latch Assembly (Part No.820-204)

Dorman – Help – Exterior Door Handle with Keyhole (Part No.88320)

Dorman – Help – Exterior Door Handle with Keyhole (Part No.88319)

Dorman – Help – Interior Door Handle (Part No.81873)

COAST TO COAST – Gloss Black Abs, With Driver Side, Without Passenger Side Keyhole (Part No.CCIDH68523BBK)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81106)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.88317)

Dorman – Help – Interior Door Handle (Part No.81874)

Dorman – Help – Interior Door Handle Chrome Lever Light Gray Housing (Part No.88691)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81104)

Dorman – Help – Interior Door Handle (Part No.81859)

Dorman – Help – Interior Door Handle (Part No.81858)

Dorman – Help – Exterior Door Handle Reinforcement Bracket (Part No.81105)

Dorman – Panel Trim Retainer – Interior – Ford (sold by each) (Part No.700-398)

GM Genuine Parts – Natural Colored Multi-Purpose Pigtail (Part No.PT2652)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2712)

Dorman – Door Lock Switch (Part No.901-131)

ACDelco – 2-Way Female Gray Multi-Purpose Pigtail (Part No.PT209)

Dorman – Door Lock Actuator – Integrated with Latch (Part No.931-310)

Carquest Premium – Multi-Use Connector (Part No.PTA1829)

GM Genuine Parts – Black Door Lock Switch with Blue Backlight (Part No.15823977)