2008 Chevrolet Impala Ignition Sensors
More 2008 Chevrolet Impala Ignition Sensors
Find your specific 2008 Chevrolet Impala original or aftermarket Ignition Sensors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2008 Chevrolet Impala Ignition Sensors
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3704)
from
$36.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Flat Response Knock Sensor (Part No.F6020203432DEL)
from
$51.05
As a global leader in engine and powertrain management systems technology, Delphi manufactures a Flat Response Engine Knock Sensor that is 100 percent OE, providing an exact fit and superior quality. The Delphi Flat Response Knock Sensor has a flat frequency response over a range of from 1 to 18 kHz, thus the same sensor can be used on different engines by simply adjusting the filter frequency of the signal processing electronics to match the knock frequency of the engine. In addition, the sensor responds to knock frequencies higher than the primary knock frequency. This allows the higher knock frequencies to be used by a control system, either individually or combined with the primary knock frequency
Product Features:
See More
Product Features:
- Self-generating piezoelectric design requires no power to the sensor
- Flat frequency response allows the same senor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Large mounting hole accommodates mounting bolts up to 10mm in diameter
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0107)
from
$42.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3656)
from
$23.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Knock Sensor (Part No.AS10014)
from
$44.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0300)
from
$22.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Delphi – Knock Sensor (Part No.AS10009)
from
$60.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
ACDelco – Ignition Knock (Detonation) Sensor (Part No.213-96)
from
$58.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Sends signals to the engine control module (ECM) to adjust timing
- Helps prevent damage to the engine caused by pre-ignition
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Ignition Knock (Detonation) Sensor (Part No.12623095)
from
$39.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Sends signals to the engine control module (ECM) to adjust timing
- Helps prevent damage to the engine caused by pre-ignition
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Delphi – Knock Sensor (Part No.AS10133)
from
$44.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
Encore Automotive – Genuine OE Ignition Knock (Detonation) Sensor (Part No.SKS-D20003)
from
$33.99
Encore Automotive Genuine OE knock sensor detects excessive/unusual pulses caused by the engine ignition and makes proper adjustments to reduce the risk of damaging pistons. Encore Automotive is dedicated to bringing the latest original equipment technologies to the Aftermarket to provide the highest overall value.
Product Features:
See More
Product Features:
- Genuine OE Part
- Highly accurate engine vibration detection
- Excellent material quality
Delphi – Knock Sensor (Part No.AS10013)
from
$41.49
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Delphi knock sensors help maximize engine performance with all fuels
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
ACDelco – Ignition Knock (Detonation) Sensor (Part No.213-1576)
from
$29.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Sends signals to the engine control module (ECM) to adjust timing
- Helps prevent damage to the engine caused by pre-ignition
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3668)
from
$37.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3687)
from
$65.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – Ignition Knock (Detonation) Sensor (Part No.213-3522)
from
$83.99
ACDelco GM Original Equipment Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Sends signals to the engine control module (ECM) to adjust timing
- Helps prevent damage to the engine caused by pre-ignition
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – GM Original Equipment Ignition Knock (Detonation) Sensor (Part No.F6020430220ACD)
from
$21.74
An ACDelco GM Original Equipment Ignition Knock (Detonation) Sensor monitors the engine for pinging or spark knock, and is a GM-recommended replacement for your vehicle’s original component. The sensor creates a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses this signal to adjust the ignition timing and air/fuel mixture. This original equipment ignition knock sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – GM Original Equipment Ignition Knock (Detonation) Sensor (Part No.F6020323280ACD)
from
$115.35
An ACDelco GM Original Equipment Ignition Knock (Detonation) Sensor monitors the engine for pinging or spark knock, and is a GM-recommended replacement for your vehicle’s original component. The sensor creates a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses this signal to adjust the ignition timing and air/fuel mixture. This original equipment ignition knock sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Undergo the same stringent testing process as the original part
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – Knock Sensor (Part No.EKC1007)
from
$26.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Knock Sensor (Part No.AS10261)
from
$21.99
Manufactured to meet or exceed OE requirements; Delphi Knock Sensors help maximize engine performance with all fuels; Delphi Knock Sensors prevent against engine damage from pre-ignition knocking.
Product Features:
See More
Product Features:
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Delphi knock sensors prevent against engine damage from pre-ignition knocking
- Calibrated for a wide variety of frequencies to detect shifts, and adjust to provide accurate signals to help maximize engine performance
- Flat frequency response allows the same sensor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with 2-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Self-generating piezoelectric design requires no power to the sensor
NTK – Ignition Knock (Detonation) Sensor (Part No.ID0050)
from
$70.99
Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- Reinforced and extra-strength components are used to reduce chance of part failure and prevent corrosion and moisture penetration. Mounting threads match OE for easy, worry free installation.
- NTK’s Ignition Knock Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper ignition timing. This advanced technology is used for durability, drivability and fuel economy.
- The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock, or detonation, to alter the ignition timing and prevent detonation.
Carquest Premium – Ignition Knock (Detonation) Sensor W/ Thread Sealant (Part No.SBC3718)
from
$39.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Delphi – Flat Response Knock Sensor (Part No.F6020323280DEL)
from
$79.29
As a global leader in engine and powertrain management systems technology, Delphi manufactures a Flat Response Engine Knock Sensor that is 100 percent OE, providing an exact fit and superior quality. The Delphi Flat Response Knock Sensor has a flat frequency response over a range of from 1 to 18 kHz, thus the same sensor can be used on different engines by simply adjusting the filter frequency of the signal processing electronics to match the knock frequency of the engine. In addition, the sensor responds to knock frequencies higher than the primary knock frequency. This allows the higher knock frequencies to be used by a control system, either individually or combined with the primary knock frequency
Product Features:
See More
Product Features:
- Self-generating piezoelectric design requires no power to the sensor
- Flat frequency response allows the same senor to be used on different engines and the sensor responds to knock frequencies higher than the primary frequency
- Ground-isolated design with two-wire shielded harness helps protect the sensor signal from electro-magnetic interference (EMI)
- Large mounting hole accommodates mounting bolts up to 10mm in diameter
Carquest Premium – Ignition Knock (Detonation) Sensor W/ Thread Sealant (Part No.SBC3703)
from
$59.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Ignition Knock (Detonation) Sensor W/ Thread Sealant (Part No.SBC3712)
from
$39.99
MotoRad Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Popular 2008 Chevrolet Impala Ignition Sensors Categories
2008 Chevrolet Impala Ignition Sensors
Maybe you’re in the middle of a full rebuild of that 2008 Chevrolet Impala. Maybe you just need a couple of Ignition Sensors. Either way, Advance Auto Parts has 5 different Ignition Sensors in our inventory ranging from $21.74 to $29.99. That means you can find the exact parts or products you need to keep that 2008 Chevrolet Impala running smoothly.
Ignition Sensors are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Chevrolet Impala. Carquest Premium, AC Delco, and NTK are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Ignition Sensors for your 2008 Chevrolet Impala, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Ignition Sensors to keep your 2008 Chevrolet Impala rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Ignition Sensors Brands To Make Your 2008 Chevrolet Impala Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Chevrolet Impala demands trusted brand parts and products to keep it running. Many trusted brands of Ignition Sensors make up Advance Auto Parts’ inventory, and all are ready to help make your Impala the best it can be. Be sure to browse some of our top Ignition Sensors brands and parts.
FAQs for 2008 Chevrolet Impala Ignition Sensors
What are the most purchased Ignition Sensors for the 2008 Chevrolet Impala?
Out of 5 Ignition Sensors for the 2008 Chevrolet Impala, the most popular in our inventory are:
