2008 Chevrolet HHR Fuel and Emissions Systems

Name: Direct Injection High Pressure Fuel Pump: With Gasket
Brand: Delphi
SKU: HM10029
Price: 872.99 USD

Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 2008 HHR. Advance Auto Parts has popular HHR parts like Fuel Injectors, Oxygen Sensors, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other HHR model years including 2006, 2007, 2009, 2010, 2011 and more. Select a category of 2008 Chevrolet HHR Fuel and Emissions Systems below and start saving instantly.

Popular 2008 Chevrolet HHR Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Fuel Pressure Sensors

Air Flow Meters and Mass Air

Gas Caps

Fuel Pumps

Oxygen Sensors

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

Fuel Injector Rails

Fuel Injection Pressure Sensors

MAP-Barometric Pressures

Vapor Canister Vent Valves

Secondary Air Injection Pipe Retainer

Manifold Air Pressure Sensors

Canister Purge Solenoids

Direct Injection High Pressure Fuel Pumps

Fuel Injection Fuel Rail Pressure Sensors

Fuel Injectors

Fuel Tank Sender Retainers

Vapor Canisters

Ambient Air Temperature Sensor Connectors

Fuel Tank Pressure Sensors

Fuel Pressure Relief Valve Caps

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Tank Lock Rings

Fuel Tank Filler Necks

Secondary Air Injection Relays

Fuel Injector Connectors

Manifold Differential Pressure Sensors

Fuel Pump Tank Seals

Oxygen Sensor Connectors

Fuel Pump Tappets

Fuel Feed Lines

Fuel Injector O-rings

EGR Valve Gaskets

Air Pump Check Valve Gaskets

Fuel Pump Harness Connectors

Vapor Canister Purge Solenoid Connectors

Mass Air Flow Sensor Gaskets

Vapor Canister Purge Valve Brackets

Fuel Injection Fuel Pressure Service Kit

Fuel Cap Tester Adapters

Fuel Sender Connectors

Vapor Canister Vent Solenoid Connectors

Diesel Exhaust Fluid (DEF) Pump Connector

Fuel Injector Seal Tool Set

Essential Fuel and Emissions Systems for 2008 Chevrolet HHRs

from

$872.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$49.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$49.99

ACDelco GM Original Equipment Vapor Canister Vent Valves are GM-recommended replacements for your vehicle’s original components. These valves, when opened, allow air to pass in and out of the vapor canister vent. These original equipment vapor canister vent valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls fresh air flow to the canister
Sends fuel vapors to the engine for re-burn
Helps control fuel tank pressure
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$42.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$20.79

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$111.33

ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda. ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and After sales, a division of General Motors.

from

$188.99

from

$6.29

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$17.49

GM Genuine Parts Vapor Canister Purge Solenoid Brackets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$87.99

ACDelco GM Original Equipment Engine Intake Manifold Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$79.87

Oxygen Sensor

from

$47.49

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced.
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$68.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$63.99

CARQUEST’s line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and o-rings.

Product Features:

Each unit is 100% tested to OE specifications.
Includes new o-rings and seals made of premium OE quality materials.
Includes application specific technical bulletin, where applicable.

from

$46.99

ACDelco GM Original Equipment Multi Purpose Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$59.99

ACDelco GM Original Equipment Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls vapor flow from canister to engine
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$19.99

from

$49.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$35.99

This vapor canister vent solenoid connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this vapor canister vent solenoid connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$68.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$149.99

Fuel filler neck leaking? This replacement fuel filler neck is precision-engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck is made to match the original equipment on specific vehicles.
Durable construction – made of corrosion-resistant materials to reduce future failure potential.
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$14.79

GM Genuine Parts Fuel Injection Fuel Pressure Service Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$94.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$13.99

CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.

Product Features:

Precision stamped for perfect fit and pump position
Always replace lock ring as a part of fuel pump service

from

$24.90

ACDelco GM Original Equipment Fuel Tank Sending Unit Lock Rings are quality replacement parts for effectively sealing ACDelco GM OE Fuel Tank Sending Units. ACDelco GM OE Fuel Tank Sending Unit Lock Rings are a GM-recommended replacement for your vehicle’s original components. These original equipment lock rings are manufactured to fit your specific GM vehicle and will provide the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory fuel tank sending unit lock ring
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

Upgrade your 2008 Chevrolet HHR with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2008 Chevrolet HHR, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your HHR functioning at its best. At Advance Auto Parts, we offer a wide selection of 124 Fuel and Emissions Systems for the 2008 Chevrolet HHR, designed to meet your needs without breaking the bank. From Fuel Injector replacements to Oxygen Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2008 Chevrolet HHR at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.79 to $872.99, with an average price of $71.72. Our 124 Fuel and Emissions Systems in stock come from 20 trusted brands, so you’re sure to find the right part for your 2008 Chevrolet HHR without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chevrolet HHR, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like DENSO, FELPRO, Bosch, and more. DENSO Fuel and Emissions Systems start at just $62.99 and boast an impressive 5 stars average rating from customers. FELPRO and Bosch also bring quality to the table, with Fuel and Emissions Systems available starting at $2.79, and at an average 5 stars rating. With 4,263 customer reviews and counting, our 2008 Chevrolet HHR Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chevrolet HHR is always ready to roll. We’re committed to providing you with everything you need to keep your HHR in top shape, all in one place. Start shopping confidently below for your 2008 Chevrolet HHR!

Best-Selling Fuel Injectors for 2008 Chevrolet HHRs

Enhance the driving experience in your Chevrolet with 26 quality Fuel Injector components, starting at $5.49.

show more show less

from

$56.99

Hitachis Air Flow Sensors (MAFs) measure the amount and characteristics of air entering the engine. Hitachi uses precision elements and high-quality components for enhanced durability and accurate air flow measurements. Hitachi MAFs are 100% air flow tested for ideal performance and are calibrated for each application ensuring your vehicle meets the strict emission standards set by the manufacturer. Details such as a contaminant bypass port (when applicable) and protected circuitry providing a durable and reliable product approved by OE manufacturers makes Hitachis air flow sensors the premium choice.

Product Features:

Hitachi is a Tier 1 OE supplier for air flow sensors
100% NEW, never remanufactured
Hitachi’s advanced precision elements and high quality components provide enhanced durability. We feature exact fitment and calibration for each vehicle, which assists engine efficiency and fuel mileage. Our sensors are 100% air flow tested to meet exac
Precision manufactured and assembled sensing elements for accurate air flow measurements

from

$5.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$16.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each gasket set is built to meet or exceed all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$79.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$7.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$76.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$38.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$68.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$8.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$10.49

Product Features:

Premium OE quality materials
Includes upper o-ring
Includes nylon split ring
Includes combustion seal

from

$105.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$99.99

GM Genuine Parts Mass Air Flow (MAF) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are key parts of the engine management system, and are GM-recommended replacements for your vehicle’s original components. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This helps ensure the most efficient air/fuel mixture for the best fuel economy and power. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Measures the amount of air entering the engine so the ECM can determine the amount of fuel to inject
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$49.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$6.29

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$94.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$66.76

The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$48.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$64.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Stainless steel calibration slide and spring assembly prevents corrosion within the fuel control body leading to an extended service life
Precision wound and trimmed solenoid windings allow the computer to command efficient delivery of fuel
High-temp Viton O-rings enable prolonged sealing of injector under extreme heat conditions
Fiber optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$14.79

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$97.19

Hitachi manufactures a direct fit air mass sensor that guarantees OEM quality, fit and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$316.99

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$129.99

Each unit is 100% tested to OE specifications
Includes new o-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$127.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$119.99

GDI SEAL TOOL KIT

from

$46.43

Fuel Injector O-Ring

from

$8.79

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Most Popular 2008 Chevrolet HHR Oxygen Sensors

Customize your Chevrolet with 26 Oxygen Sensors products like Oxygen Sensors and Oxygen Sensor Connectors, all priced under $199.99.

show more show less

from

$69.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$80.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$68.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$98.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Advanced Wideband sensing element for exact air/fuel measurement
Robust sensor design increases sensor longevity
Seared protection tube due to 100% functional quality test
True Direct-fit
Pre-coated threads with anti-seize compound right out of the box

from

$53.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$62.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$84.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$69.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$80.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$81.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$69.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$61.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$69.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$56.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$118.99

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$199.99

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$85.04

Oxygen Sensor

from

$91.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$105.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$53.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$94.82

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

from

$91.21

The ACDelco GM Original Equipment Oxygen (O2) Sensor is a GM-recommended replacement for your vehicle’s original component. The Oxygen (O2) Sensor is a special feedback sensor on your vehicle’s exhaust system. This sensor measures the proportion of oxygen in the exhaust gases. Using this measurement, the engine management computer can adjust the air/fuel ratio near the optimum value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. This original equipment oxygen sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors. When you are looking for a match to GM Original Equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done.

Product Features:

Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$87.29

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$86.04

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$84.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$82.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

Top Picks for 2008 Chevrolet HHR Fuel Pumps

Upgrade Chevrolet HHRs with top-quality Fuel Pumps parts, including 12 OEM and aftermarket selections for your 2008 model.

show more show less

from

$41.35

Fuel Pump Tappet

from

$68.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$321.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$872.99

Capable of delivering fuel at high pressures that can range from 2,000-2,800 PSI
Mechanically driven high fuel flow pump enables rail pressure build up quickly for fast start times
Fuel delivered directly into the engine combustion chamber for increased horsepower and fuel economy
Meets OE specifications

from

$529.99

GM Genuine Parts Mechanical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These help provide a steady, reliable supply of fuel for your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a steady, reliable supply of fuel for your vehicle’s engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$363.34

Fuel Pump – Mechanic

from

$357.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$347.39

Continental fuel modules are a genuine OEM part. They are identical in fit, form, and function and provide the genuine quality of OE components supplied to auto manufacturers worldwide. Professional technicians and DIYers alike want quality products for ease of installation, fit, and performance. Continental fuel modules are designed for long service life and simplified installation. They are built in OE ISO TS certified facilities and manufactured to the highest quality standards. They offer dependable performance and robust design by being a genuine OEM part while still maintaining a competitive price.

from

$293.99

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$279.04

Fuel Pump Assembly

from

$49.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

In-Demand Gas Caps for 2008 Chevrolet HHRs

Select from 3 premium Gas Caps parts for your 2008 Chevrolet HHR, with prices ranging from $20.79 to $30.49.

show more show less

from

$20.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$30.49

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$27.49

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Sold 2008 Chevrolet HHR Air Flow Sensors

Explore our best-selling Chevrolet parts for the 2008 HHR among 18 OEM and aftermarket options starting from $11.99.

show more show less

from

$65.64

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$49.99

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$36.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$40.99

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C

from

$89.99

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.

from

$88.34

Detect oxygen content in the exhaust gases to optimize emissions and fuel economy
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$11.99

GM Genuine Parts Mass Air Flow Sensor Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$39.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$18.99

from

$12.99

ACDelco GM Original Equipment Ambient Air Temperature Sensors are used with automatic climate control systems. The sensors provide the HVAC system controller with outside air temperature, allowing the controller to modify the climate-control strategy. The sensors may also provide the signal for the outside temperature in the driver information display. This original equipment ambient air temperature sensor is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Repairs the outside temperature display function caused by failed ambient temp sensor
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$118.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$103.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$99.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$87.99

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$79.87

Oxygen Sensor

from

$62.40

The ACDelco GM Original Equipment Multi-Purpose Pressure Sensor converts mechanical force into an electrical signal, and is a GM-recommended replacement for your vehicle’s original component. It monitors the pressure of various system fluids in your vehicle. This original equipment multi-purpose pressure sensor has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Undergo the same stringent testing process as the original part
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$54.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$20.45

Ambient Temp Sensor

Top-Rated Fuel and Emissions Systems Brands For Your 2008 Chevrolet HHR

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2008 Chevrolet HHRs. Below you’ll find some of our best rated Fuel and Emissions Systems from DENSO, FELPRO, and Bosch, and more. Fuel and Emissions Systems from these brands that fit a 2008 HHR start at just $2.79 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular DENSO 2008 Chevrolet HHR Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2008 Chevrolet HHR, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. DENSO ticks all of those boxes. We offer a wide selection of DENSO Fuel and Emissions Systems, specifically designed for the 2008 Chevrolet HHR. With over 9 DENSO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $62.99, with an average price of just $78.87. Plus, with over 519 customer reviews and an average rating of 5 stars, you can trust that our DENSO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$82.99

This product is not rated

Oxygen Sensor: Downstream, 4 Wire, 25.87" Long, Heated, Exact Fit

“”

from
$87.29

This product is not rated

First Time Fit Oxygen Sensor

“”

from
$103.99

This product is not rated

Wideband Oxygen Sensor: Upstream, 5 Wire, 14.96" Long, Heated, Exact Fit

“”

Popular FELPRO 2008 Chevrolet HHR Fuel and Emissions Systems

FELPRO auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2008 Chevrolet HHR owner should feel confident when installing genuine FELPRO parts in their vehicle. To ensure the best fit and performance for your 2008 HHR, Advance Auto Parts carries a full inventory of 5 FELPRO Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these FELPRO Fuel and Emissions Systems range from $2.79 to $16.29, plus, with more than 113 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$2.79

This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

from
$3.99

This product is not rated

EGR/EXHAUST AIR SUPPLY GASKET

“”

from
$5.49

(3)

Fuel Injection Throttle Body Mounting Gasket

“Got the job done”

FAQs for 2008 Chevrolet HHR Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2008 Chevrolet HHRs?

Out of 124 Fuel and Emissions Systems that fit 2008 Chevrolet HHRs, the following parts are the top sellers:

Fuel Injector O-Ring Kit (3504360) – $7.49
Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (18730541) – $80.99
Fuel Cap: 10839, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (5020025) – $20.79

What’s the price range for 2008 Chevrolet HHR Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2008 Chevrolet HHR start at $2.79 and go up to $872.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2008 Chevrolet HHR?

The average price for Fuel and Emissions Systems for the 2008 Chevrolet HHR is $71.72. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet HHR model years?

Yes, we currently carry Fuel and Emissions Systems for 5 model years of Chevrolet HHRs between 2006 and 2011. Fuel and Emissions Systems are bought most frequently for the following model years: 2011, 2010, 2009, 2007, and 2006.

What are the cheapest Fuel and Emissions Systems for my 2008 Chevrolet HHR?

The cheapest 2008 Chevrolet HHR Fuel and Emissions Systems we carry in stock are:

EGR/EXHAUST AIR SUPPLY GASKET (20688655) – $2.79
EGR/EXHAUST AIR SUPPLY GASKET (12005630) – $3.99
Chrysler, GM Push Rivet (11910661) – $4.49
Fuel Injection Throttle Body Mounting Gasket (20688409) – $5.49
Fuel Pressure Relief Valve Cap (12044334) – $6.29

What are the top-rated Fuel and Emissions Systems that fit the 2008 Chevrolet HHR?

Out of 4,263 reviews by customers, our 2008 Chevrolet HHR Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2008 Chevrolet HHR and their top-rated products:

Air Flow Sensors
- First Time Fit Oxygen Sensor (10747445) – $65.64

What types of Fuel and Emissions Systems do you sell for my 2008 Chevrolet HHR?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2008 Chevrolet HHR:

Can I get help with 2008 Chevrolet HHR Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet HHR Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet HHR Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Chevrolet HHR Fuel and Emissions Systems

Delphi – Direct Injection High Pressure Fuel Pump: With Gasket (Part No.HM10029)

Carquest Premium – Air Suspension Compressor Motor Connector (Part No.PTC1308)

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.71194)

ACDelco – Vapor Canister Vent Valve (Part No.214-2341)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.CPC1051)

Carquest Premium – Fuel Cap: 10839, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10839)

ACDelco – Evaporation Pres Sensor (Part No.E2070451781ACD)

Carquest Premium – Vapor Canister (Part No.CPN1327)

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

GM Genuine Parts – Vapor Canister Purge Valve Bracket (Part No.12579283)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

ACDelco – Intake Manifold Pressure and Temperature Sensor (Part No.213-3847)

Bosch – Oxygen Sensor (Part No.C50101333652BOS)

Dorman – Fuel Tank Strap (Part No.578-524)

Felpro – EGR/EXHAUST AIR SUPPLY GASKET (Part No.71330)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6214)

Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1253)

ACDelco – Multi-Purpose Pressure Sensor (Part No.213-4681)

ACDelco – Vapor Canister Purge Valve (Part No.214-1680)

Carquest Premium – Multi Purpose Relay (Part No.RAA1237)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0205)

Dorman – Wire Harness Assembly (Part No.645-216)

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1317)

Dorman – Fuel Filler Neck Assembly (Part No.574-050)

GM Genuine Parts – Fuel Injection Fuel Pressure Service Kit with Valve and Cap (Part No.12597209)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2183)

Carquest Premium – Fuel Tank Lock Ring (Part No.LR3004)

ACDelco – GM Original Equipment Fuel Tank Sending Unit Lock Ring (Part No.E2029575746ACD)

Hitachi – Air Flow Sensor – New Actual OE Part (Part No.MAF0034)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61309)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61685)

Spectra Premium – Mass Air Flow Sensor (Part No.MA191)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 70599)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-50054)

MAHLE Original – Fuel Injection Nozzle O-Ring Kit (Part No.GS33482)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6214)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)

Carquest Premium – Fuel Injector Seal (Part No.AS057)

ACDelco – Multi-Port Fuel Injector Assembly (Part No.217-3158)

GM Genuine Parts – Mass Airflow Sensor with Intake Air Temperature Sensor (Part No.213-4222)

Carquest Premium – Remanufactured Fuel Injector (Part No.A211-2153)

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2183)

ACDelco – GM Original Equipment Fuel Injector O-Ring Kit (Part No.C1013205500ACD)

GM Genuine Parts – Multi-Port Fuel Injector O-Ring Kit with Brackets and Insulators (Part No.217-2257)

Carquest – Fuel Injector (Part No.67586)

GM Genuine Parts – Fuel Injection Fuel Pressure Service Kit with Valve and Cap (Part No.12597209)

Hitachi – Mass Air Sensor (Part No.B3150396188HIT)

ACDelco – Direct Fuel Injector Assembly (Part No.217-3086)

Carquest Premium – Remanufactured Fuel Injector (Part No.A511-1023)

Delphi – Mass Air Flow Sensor (Part No.AF10142)

Carquest Premium – GDI SEAL TOOL KIT (Part No.ATK-001)

Elring – Fuel Injector O-Ring (Part No.C1013205500ELR)

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

DENSO – Oxygen Sensor: Upstream, 4 Wire, 9.92" Long, Heated, Exact Fit (Part No.234-4242)

NTK – Switching Oxygen Sensor: 4 Wire, 27.75" Long, Heated, Direct Fit (Part No.21043)

NTK – Switching Oxygen Sensor: 4 Wire, 16.5" Long, Heated, Direct Fit (Part No.21546)

Bosch – Wideband Oxygen Sensor: 5 Wire, 13.78" Long, Heated, Exact Fit (Part No.15388)

Bosch – Oxygen Sensor: 4 Wire, 14.96" Long, Heated, Exact Fit (Part No.15152)

DENSO – Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Exact Fit (Part No.234-4668)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 27.95" Long, Heated, Exact Fit (Part No.234-4066)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated (Part No.15740)

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4209)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4212)

Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)

GM Genuine Parts – Oxygen Sensor: 4 Wires, 184.5 mm Long, Heated, Exact Fit (Part No.213-4537)

Bosch – Oxygen Sensor: 4 Wire, 22" Long, Heated, Exact Fit (Part No.15128)

GM Genuine Parts – Oxygen Sensor: 4 Wires, 655 mm Long, Heated, Exact Fit (Part No.213-3138)

GM Genuine Parts – Oxygen Sensor: 6 Wires, 283 mm Long, Heated, Exact Fit (Part No.213-3844)

Bosch – Oxygen Sensor (Part No.C50101333527BOS)

Bosch – Wideband Oxygen Sensor: 4 Wire, 25.9" Long, Heated, Exact Fit (Part No.15699)

NTK – Switching Oxygen Sensor: 4 Wire, 16.5" Long, Heated, Direct Fit (Part No.21558)

Carquest Premium – Oxygen Sensor Connector (Part No.PTA1517)

NTK – Oxygen Sensor (Part No.C5010331593NTK)

ACDelco – GM Original Equipment Oxygen Sensor (Part No.C5010205278ACD)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010112333ND)

Bosch – Bosch Oxygen Sensor (Part No.C5010397464BOS)

NTK – Switching Oxygen Sensor: 4 Wire, 26.5" Long, Heated, Direct Fit (Part No.21564)