2008 Chevrolet Equinox Fuel and Emissions Systems

Name: Vapor Canister Vent
Brand: ACDelco
SKU: 84802774
Price: 54.99 USD

Below you will find various in-demand Chevrolet Fuel and Emissions Systems, components and accessories for your 2008 Equinox. Advance Auto Parts has popular Equinox parts like Fuel Pumps, Oxygen Sensors, Gas Caps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other Equinox model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2008 Chevrolet Equinox Fuel and Emissions Systems below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2008 Chevrolet Equinox Fuel and Emissions Systems Categories

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

Gas Caps

Ambient Air Temperature Sensor Bolts

Fuel Pumps

Oxygen Sensors

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

MAP-Barometric Pressures

Manifold Air Pressure Sensors

Canister Purge Solenoids

EGR Valves

Fuel Injectors

Vapor Canisters

Fuel Tank Pressure Sensors

Fuel Pressure Relief Valve Caps

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

EGR Lines

Fuel Tank Lock Rings

Fuel Tank Sending Units

Mass Air Flow Sensor Connectors

Fuel Pump Tank Seals

Oxygen Sensor Connectors

EGR Tubes

EGR Valve Gaskets

Fuel Pump Harness Connectors

Fuel Sender Control Module Connector

Vapor Canister Purge Solenoid Connectors

EGR Valve Connectors

Fuel Rail Pressure Relief Valves

Exhaust Gas Recirculation (EGR) Pipe Gaskets

Fuel Cap Tester Adapters

EGR Solenoid Valve Connector

Fuel Tank Sending Unit Seals

Essential Fuel and Emissions Systems for 2008 Chevrolet Equinoxes

from

$54.99

ACDelco GM Original Equipment Vapor Canister Vent Solenoids are GM-recommended replacements for your vehicle’s original components. These solenoids communicate with the valve to open and close, allowing air to pass in and out of the vapor canister vent. These original equipment vapor canister vent solenoids have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls fresh air flow to the canister
Sends fuel vapors to the engine for re-burn
Helps control fuel tank pressure
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$157.99

ACDelco GM Original Equipment Fuel Injectors are electro-magnetic valves that meter fuel into the engine’s intake manifold or cylinders for combustion, and are GM-recommended replacements for your vehicle’s original components. The engine control module (ECM) operates the injector by applying an electric current to the injector solenoid winding, causing the needle valve to open, and allowing pressurized fuel to be atomized into the intake airstream. These original equipment fuel injectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Atomizes fuel into the engine’s intake manifold or cylinders, as part of the fuel and engine management system
Allows for a quick throttle response
Assists in cold engine starts
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$76.99

Carquest exhaust gas recirculation (EGR) valves are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each EGR valve is 100% tested to ensure proper performance and a trouble-free installation. Carquest EGR valves are a cost-effective solution for your engine management repair. Carquest EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
Gaskets or seals are included if required for installation
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$12.99

Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:

Engineered to meet or exceed all OEM specifications
Precision stamped and are treated with a rust proof finish to ensure durability and strength

from

$125.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$112.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$313.99

The Evaporative Emission System is designed to control fuel vapors in the vehicle fuel storage system to prevent any release of fuel vapors into the atmosphere. In a normally operating system, released vapors from the fuel storage tank will be directed into an on-board charcoal canister via a piping system and control valves. Under the most ideal engine operating condition, the vapors will be pulled into the engine to be burned during the normal combustion process.

Product Features:

Application matched components ensure the vehicle will be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Features application specific mounting bracket and accessories as the dealer purchased part provides ease of installation.
Canister carbon volumn equal to original equipment providing maximum hydrocarbon emission control.

from

$4.79

GM Genuine Parts Fuel Injection Fuel Rail Pressure Relief Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$33.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$22.99

GM Genuine Parts Fuel Tank Sending Unit O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These O-rings help seal out contaminants, and help protect your vehicle’s fuel tank sending unit. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Help seal out contaminants
Help protect fuel tank sending unit
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$73.99

Carquest Premium mass air flow (MAF) sensors are built to meet the original equipment (OE) specifications for each application. Our MAF sensors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium mass air flow sensors are 100% new and undergo extensive validation testing to ensure long-lasting performance and reliability.

Product Features:

Designed to meet OE specifications for fit, form and function
100% new unit with no core charge
Advanced micro-controlled technology delivers more accurate output in extreme temperatures
Extensive validation testing to ensure precision output for better performance and reliability
O-rings or gaskets included where applicable

from

$47.99

Maximize your vehicle’s efficiency and emissions control with Carquest Vapor Canister Purge Solenoids. Engineered for precision, these solenoids seamlessly regulate the flow of fuel vapors from the Vapor Canister to the engine for cleaner combustion, reducing harmful emissions. Built to meet and/or exceed OEM standards, Carquest Purge Solenoids offer reliable functionality, long-lasting durability, and easy installation.

Product Features:

Enhances overall engine performance by providing proper vapor flow to maintain correct air-fuel mixture.
Helps reduce harmful emissions and ensures compliance with environmental regulations by controlling the release of fuel vapors into the engine
Ensures precise operation with electromagnetic principles to control the flow of fuel vapors from the carbon canister to the engine
Manufactured from high quality engineered materials, resistant to fuel vapors and extreme temperatures, ensuring long lasting performance
Meets or exceeds all OEM specifications

from

$321.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel senders are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$44.99

This fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel pump tank seal is designed to match the fit and function of the original seal on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to fatigue or due for replacement during fuel pump tank service
Durable construction – recommended for replacement when the fuel pump or sensor is replaced
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$41.49

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$29.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$64.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$85.99

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$54.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$21.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive ¿Genuine¿ components.

Product Features:

Guaranteed Fitment
Direct-fit OE replacement design restores factory fuel pressure sensor function
Easy plug-and-play connection
Manufactured using high-quality materials to withstand intense engine heat
Alloy conductors minimize electrical resistance for accurate operation
Designed and tested for reliability and long life

from

$6.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$37.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$35.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$5.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$50.99

ACDelco GM Original Equipment Vapor Canister Purge Valves are GM-recommended replacements for your vehicle’s original components. The purge valve controls the flow of fuel vapor from the vapor canister to the intake manifold. These original equipment vapor canister purge valves have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Controls vapor flow from canister to engine
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$6.29

GM Genuine Parts Fuel Pressure Relief Valve Caps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Upgrade your 2008 Chevrolet Equinox with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2008 Chevrolet Equinox, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your Equinox functioning at its best. At Advance Auto Parts, we offer a wide selection of 98 Fuel and Emissions Systems for the 2008 Chevrolet Equinox, designed to meet your needs without breaking the bank. From Fuel Pump replacements to Oxygen Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2008 Chevrolet Equinox at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $1.49 to $736.99, with an average price of $76.16. Our 98 Fuel and Emissions Systems in stock come from 14 trusted brands, so you’re sure to find the right part for your 2008 Chevrolet Equinox without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2008 Chevrolet Equinox, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like DENSO, Carquest Premium, Delphi, and more. DENSO Fuel and Emissions Systems start at just $73.99 and boast an impressive 4.6 stars average rating from customers. Carquest Premium and Delphi also bring quality to the table, with Fuel and Emissions Systems available starting at $16.99, and at an average 4.4 stars rating. With 1,655 customer reviews and counting, our 2008 Chevrolet Equinox Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2008 Chevrolet Equinox is always ready to roll. We’re committed to providing you with everything you need to keep your Equinox in top shape, all in one place. Start shopping confidently below for your 2008 Chevrolet Equinox!

Best-Selling Fuel Pumps for 2008 Chevrolet Equinoxes

Enhance the driving experience in your Chevrolet with 6 quality Fuel Pump components, starting at $35.99.

show more show less

from

$64.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$304.99

GM Genuine Parts Electrical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These pumps deliver fuel to your vehicle’s fuel injectors, helping to provide a steady, reliable fuel supply to your vehicle’s engine. Electric pumps are offered in standard turbine or modular assembly as specified for each application. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$736.99

GM Genuine Parts Fuel Pump Module Assemblies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These module assemblies help deliver fuel to your vehicle’s fuel injectors, providing a steady, reliable fuel supply to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$466.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$35.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

Most Popular 2008 Chevrolet Equinox Oxygen Sensors

Customize your Chevrolet with 18 Oxygen Sensors products like Oxygen Sensors and Oxygen Sensor Connectors, all priced under $175.99.

show more show less

from

$79.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$74.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$55.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$73.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$92.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$89.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$69.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$69.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$67.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$122.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$175.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$84.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the air/fuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$125.99

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$89.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$53.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$101.99

Specifically designed to meet the increasing demands of today’s engines
100 percent checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$98.99

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$65.99

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

Top Picks for 2008 Chevrolet Equinox Gas Caps

Upgrade Chevrolet Equinoxes with top-quality Gas Caps parts, including 8 OEM and aftermarket selections for your 2008 model.

show more show less

from

$19.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$24.99

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$18.99

Product Features:

Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$27.49

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$18.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$30.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$18.79

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

In-Demand Air Flow Sensors for 2008 Chevrolet Equinoxes

Select from 9 premium Air Flow Sensors parts for your 2008 Chevrolet Equinox, with prices ranging from $1.49 to $112.99.

show more show less

from

$96.99

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Insulated with silicone gel over the integrated circuit chip to protect against shock and vibration for increased durability
Internally protected against moisture intrusion and vibration
Long lasting and durable
Designed and engineered with Delphi expertise

from

$86.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$112.99

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$29.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$1.49

These nuts are manufactured using durable materials and corrosion tested to ensure required strength and Longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$16.99

ACDelco GM Original Equipment Ambient Air Temperature Sensors are used with automatic climate control systems. The sensors provide the HVAC system controller with outside air temperature, allowing the controller to modify the climate-control strategy. The sensors may also provide the signal for the outside temperature in the driver information display. This original equipment ambient air temperature sensor is a GM-recommended replacement for your vehicle’s original components and has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Repairs the outside temperature display function caused by failed ambient temp sensor
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$29.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$32.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

Most Sold 2008 Chevrolet Equinox Fuel Injectors

Explore our best-selling Chevrolet parts for the 2008 Equinox among 15 OEM and aftermarket options starting from $4.49.

show more show less

from

$66.99

Designed to meet OE specifications for fit, form and function
100% new unit with no core charge
Advanced micro-controlled technology delivers more accurate output in extreme temperatures
Extensive validation testing to ensure precision output for better performance and reliability
O-rings or gaskets included where applicable

from

$131.99

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

from

$20.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$69.99

Designed to meet OE specifications for fit, form and function
100% new unit with no core charge
Advanced micro-controlled technology delivers more accurate output in extreme temperatures
Extensive validation testing to ensure precision output for better performance and reliability
O-rings or gaskets included where applicable

from

$89.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$119.99

Designed to meet OE specifications for fit, form and function
100% new unit with no core charge
Advanced micro-controlled technology delivers more accurate output in extreme temperatures
Extensive validation testing to ensure precision output for better performance and reliability
O-rings or gaskets included where applicable

from

$4.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$8.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
High-quality materials withstand extreme conditions
Undergoes extensive testing to ensure reliability
As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process

from

$6.29

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$61.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$51.99

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$5.99

GM Genuine Parts Fuel Injection Throttle Body Mounting Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These gaskets help provide an air-tight seal between the throttle body and the intake manifold, and are GM-recommended replacements for your vehicle’s original components. Replace this gasket whenever you service the throttle body, as leaks can negatively affect the air/fuel ratio and compromise performance. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$50.99

Bosch is a recognized OE leader in fuel systems technology, with more than 45 years of gasoline fuel injection experience. The fuel injection program provides vast coverage for Domestic, European, and Asian vehicles.

Product Features:

Guaranteed OE fit, form and function
Manufactured of the highest quality materials
Provides precision flow and original spray pattern for optimal performance
Product includes top and bottom mounting o-ring
Maintains new-car smoothness and drivability

from

$8.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$5.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top-Rated Fuel and Emissions Systems Brands For Your 2008 Chevrolet Equinox

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2008 Chevrolet Equinoxes. Below you’ll find some of our best rated Fuel and Emissions Systems from DENSO, Carquest Premium, and Delphi, and more. Fuel and Emissions Systems from these brands that fit a 2008 Equinox start at just $16.99 and are rated as high as 4.6 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular DENSO 2008 Chevrolet Equinox Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2008 Chevrolet Equinox, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. DENSO ticks all of those boxes. We offer a wide selection of DENSO Fuel and Emissions Systems, specifically designed for the 2008 Chevrolet Equinox. With over 2 DENSO brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $73.99, with an average price of just $74.49. Plus, with over 151 customer reviews and an average rating of 4.6 stars, you can trust that our DENSO Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $73.99

(150)

Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Exact Fit

“Great product”

from $74.99

(1)

Oxygen Sensor: Downstream, 4 Wire, 14.76" Long, Heated, Exact Fit

“Great product heated it’s what was needed and codes all gon3”

Popular Carquest Premium 2008 Chevrolet Equinox Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2008 Chevrolet Equinox owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2008 Equinox, Advance Auto Parts carries a full inventory of 3 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $16.99 to $66.99, plus, with more than 7 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $66.99

(1)

New Mass Air Flow Sensor – Sensor Only

“Your team was very helpful and was able to get my car back on the road within an hour!!!”

from $16.99

(5)

Fuel Tank Lock Ring LO1582926

“Seems like a nice quality part, installed nice, no complaints.”

from $19.99

(1)

Keyed Alike Locking Fuel Cap

“Works very well”

FAQs for 2008 Chevrolet Equinox Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2008 Chevrolet Equinoxes?

Out of 98 Fuel and Emissions Systems that fit 2008 Chevrolet Equinoxes, the following parts are the top sellers:

Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Exact Fit (20471867) – $73.99
Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (10049294) – $18.99
Vapor Canister Purge Valve (18057383) – $61.99

What’s the price range for 2008 Chevrolet Equinox Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2008 Chevrolet Equinox start at $1.49 and go up to $736.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2008 Chevrolet Equinox?

The average price for Fuel and Emissions Systems for the 2008 Chevrolet Equinox is $76.16. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Chevrolet Equinox model years?

Yes, we currently carry Fuel and Emissions Systems for 20 model years of Chevrolet Equinoxes between 2005 and 2026. Fuel and Emissions Systems are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Fuel and Emissions Systems for my 2008 Chevrolet Equinox?

The cheapest 2008 Chevrolet Equinox Fuel and Emissions Systems we carry in stock are:

Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (22141637) – $1.49
Fuel Injector O-Ring Kit (10030290) – $4.49
Fuel Injection Fuel Pressure Relief Valve (12047688) – $4.79
Exhaust Gas Recirculation (EGR) Valve Gasket (20780109) – $5.99
Fuel Injection Throttle Body Mounting Gasket (11935213) – $5.99

What are the top-rated Fuel and Emissions Systems that fit the 2008 Chevrolet Equinox?

Out of 1,655 reviews by customers, our 2008 Chevrolet Equinox Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2008 Chevrolet Equinox and their top-rated products:

Vapor Canister Purge Valves
- Vapor Canister Purge Valve (18057383) – $61.99
- Evaporative Emissions Purge Solenoid Valve (10717285) – $58.99
Air Flow Sensors
- Vapor Canister Purge Valve (18057383) – $61.99
- Evaporative Emissions Purge Solenoid Valve (10717285) – $58.99
Exhaust Gas Recirculation (EGR) Parts
- Vapor Canister Purge Valve (18057383) – $61.99
- Evaporative Emissions Purge Solenoid Valve (10717285) – $58.99

What types of Fuel and Emissions Systems do you sell for my 2008 Chevrolet Equinox?

As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 2008 Chevrolet Equinox:

Can I get help with 2008 Chevrolet Equinox Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Fuel and Emissions Systems and more.

What is your return policy for Chevrolet Equinox Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Equinox Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2008 Chevrolet Equinox Fuel and Emissions Systems

ACDelco – Vapor Canister Vent (Part No.84802774)

GM Genuine Parts – Direct Fuel Injector Assembly (Part No.55577403)

Carquest – EGR Valve (Part No.41C1002)

Carquest Premium – Fuel Tank Lock Ring LO1582927 (Part No.LO1582927)

Carquest Premium – Exhaust Gas Recirculation (EGR) Tube (Part No.EGE1032)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0090)

Carquest Premium – Vapor Canister (Part No.CPP1798)

GM Genuine Parts – Fuel Injection Fuel Pressure Relief Valve (Part No.88894338)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 73135)

GM Genuine Parts – Fuel Tank Sending Unit O-Ring (Part No.G42)

Carquest Premium – New Mass Air Flow Sensor – Sensor Only (Part No.MQ6396)

Carquest Premium – Vapor Canister Purge Solenoid: Includes Mounting Hardware (Part No.CPC1018)

Delphi – Fuel Tank Sending Unit (Part No.FL0370)

Dorman – Fuel Tank O-Ring (Part No.911-245)

GM Genuine Parts – Indirect Fuel Injector Kit with Clamps, Seals, Ret (Part No.217-3425)

Carquest Premium – Multi-Use Connector (Part No.PTA1107)

GM Genuine Parts – 4-Way Female Gray Multi-Purpose Pigtail (Part No.PT1069)

Dorman – Fuel Tank Strap Set (Part No.578-273)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

GM Genuine Parts – 5-Way Female Black Multi-Purpose Pigtail (Part No.PT1332)

Autotecnica – Fuel Tank Pressure Sensor (Part No.GM1316398)

Victor Reinz – EGR Valve Gasket (Part No.71-13764-00)

Carquest Premium – Fuel Cap Tester Adapter: (Part No.12427)

Carquest Premium – Multi-Use Connector (Part No.PTA1482)

Carquest Premium – Multi-Use Connector (Part No.PTA1383)

Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.71247)

ACDelco – Vapor Canister Purge Valve with Bracket (Part No.214-1685)

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

GM Genuine Parts – 4-Way Female Gray Multi-Purpose Pigtail (Part No.PT1069)

GM Genuine Parts – Electric Fuel Pump Kit with Seal, Retainer, Flange, and Valve (Part No.EP1026)

GM Genuine Parts – Fuel Tank Fuel Pump Module Kit with Level Sensor,Seals and Fuel Tank Pressure Sensor (Part No.19370691)

Delphi – Fuel Pump Module Assembly: With Float Arm, Seals (Part No.FG1846)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

Carquest Premium – Multi-Use Connector (Part No.PTA1383)

NTK – Switching Oxygen Sensor: 4 Wire, 16.5" Long, Heated, Direct Fit (Part No.21546)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 14.76" Long, Heated, Exact Fit (Part No.234-4255)

Bosch – Oxygen Sensor: 4 Wire, 14.96" Long, Heated, Exact Fit (Part No.15152)

DENSO – Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Exact Fit (Part No.234-4668)

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No.15730)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4212)

Bosch – Oxygen Sensor: 4 Wire, 25.87" Long, Heated, Universal (Part No.15741)

Bosch – Oxygen Sensor: 4 Wire, 16.93" Long, Heated, Exact Fit (Part No.15698)

Bosch – Oxygen Sensor: 4 Wire, 15.47" Long, Heated, Exact Fit (Part No.16861)

Bosch – Oxygen Sensor: 4 Wire, 12.1" Long, Heated, Exact Fit (Part No.16938)

GM Genuine Parts – Oxygen Sensor: 4 Wires, 244.5 mm Long, Heated, Exact Fit (Part No.213-2827)

NTK – Switching Oxygen Sensor: 4 Wire, 12.75" Long, Heated, Direct Fit (Part No.21571)

DENSO – Oxygen Sensor: 4 Wire, 14.76" Long, Heated, Exact Fit (Part No.234-4566)

Carquest Premium – Multi-Use Connector (Part No.PTA1517)

DENSO – Oxygen Sensor: Upstream, 4 Wire, 14.17" Long, Heated, Exact Fit (Part No.234-4819)

NTK – Switching Oxygen Sensor: 4 Wire, 14.75" Long, Heated, Direct Fit (Part No.21575)

NTK – Switching Oxygen Sensor: 4 Wire, 15.75" Long, Heated, Direct Fit (Part No.21568)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17511)

Carquest Premium – Locking Fuel Tank Cap (Part No.10518)

Carquest Premium – Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10841)

Carquest Premium – Locking Fuel Tank Cap (Part No.10511)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10848)

Carquest Premium – Locking Fuel Tank Cap (Part No.10523)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC840T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17518)

Delphi – Manifold Absolute Pressure Sensor (Part No.PS10002)

Carquest Premium – New Map Sensor (Part No.ECC1012)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0090)

ACDelco – Black Multi-Purpose Pigtail (Part No.PT2785)

Dorman – Body Bolt with Washer – M6-1.0 X 25mm (sold by each) (Part No.700-251)

GM Genuine Parts – Ambient Air Temperature Sensor (Part No.15-51150)

Carquest Premium – Multi-Use Connector (Part No.PTA1107)

Carquest Premium – Multi-Use Connector (Part No.PTA1113)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1069)

Carquest Premium – New Mass Air Flow Sensor – Sensor Only (Part No.MQ6208)

Delphi – Mass Air Flow Sensor (Part No.AF10058)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61466)

Carquest Premium – New Mass Air Flow Sensor – Complete Assembly (Part No.MQ7383)

Spectra Premium – Mass Air Flow Sensor (Part No.MA146)

Carquest Premium – New Mass Air Flow Sensor – Complete Assembly (Part No.MQ7362)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 72004)

Carquest – Fuel Injector Seal Kit (Part No.274838)

GM Genuine Parts – Fuel Pressure Relief Valve Cap (Part No.214-1044)

Carquest Premium – Remanufactured Multi Port Fuel Injector (Part No.A211-2083)