2008 Chevrolet Avalanche Differentials

Essential 2008 Chevrolet Avalanche Differentials

Dorman – Front Differential Case Gasket Kit (Part No.926-817)

Front Differential Case Gasket Kit

from

$52.99
Ensure a leak-free repair when servicing a differential. This differential gasket is a direct replacement for the original gasket and should be replaced every time work is performed on the differential housing.

Product Features:
  • Ideal replacement – this differential directly replaces the original gasket.
  • Required for routine service – this gasket should be replaced every time work is performed on the differential housing.
  • Durable construction – this differential gasket is made of durable materials for leak-free performance
  • Quality tested – this gasket has been tested for a guaranteed fit
See More

Driveworks – Tapered Roller Bearing (Part No.S-M-802048)

Tapered Roller Bearing

from

$16.99
Product Features:
  • Brand may vary by location
See More

Dorman – 4WD Differential Housing – Front (Part No.600-211)

4WD Differential Housing - Front

from

$472.99
This differential housing is a direct replacement for an original unit that has failed due to impact, normal wear, insufficient lubrication, or damaged internal components. It is made of durable materials for reliable service..

Product Features:
  • Ideal solution – this differential housing is a direct replacement for an original unit that has failed due to impact, normal wear, insufficient lubrication or damaged internal components.
  • Exact fit – matches the fit, function and performance of the original differential housing on specified vehicles
  • Durable construction – the housing and its internal components are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS

from

$23.99
Product Features:
  • Cross pin bolt
  • Fits GM 9.5″ and 9.25″ IFS
See More

Pro-King – Differential Pinion Seal (Part No.742D070)

Differential Pinion Seal

from

$9.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Dura Grip Positraction For GM 9.5" With 33 Spline Axles (Part No.26025)

Dura Grip Positraction For GM 9.5" With 33 Spline Axles

from

$1025.00
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 9.5″
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

FAG US – CUP (Part No.M802011)

CUP

from

$15.29
CUP

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Yukon Gear – GM 9.5" Ring Gear Bolt (Part No.33047)

GM 9.5" Ring Gear Bolt

from

$12.99
GM 9.5″ ring gear bolt. 12mm x 1.5.

Product Features:
  • Ring gear bolt for GM 9.2″
  • 12mm x 1.5
See More

USA Standard Gear – Master Overhaul Kit for the ’99-08 GM 8.6" Differential (Part No.37059)

Master Overhaul Kit for the '99-08 GM 8.6" Differential

from

$239.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 1999-2008 GM 8.6″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Yukon Gear – GM 8.25" IFS Side Adjuster, ’07 & Up (Part No.33356)

GM 8.25" IFS Side Adjuster, '07 & Up

from

$78.99
Product Features:
  • Side adjuster
  • Fits GM 8.2.5″ IFS
See More

Dorman – 4WD Locking Hub Actuator (Part No.K7027699827DOR)

4WD Locking Hub Actuator

from

$231.58
More like a complete kit than a single part, Dorman’s Four-Wheel Drive (4WD) Actuator comes with all the parts needed to complete the repair. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.

Product Features:
  • Includes all necessary gaskets and seals (where applicable)
  • Sealed for leak resistance
  • Engineered for durability against harsh road and weather conditions, including water intrusion
  • Quality tested to ensure trouble free installation and performance
See More

Yukon Gear – Master Overhaul Kit For ’99 & Newer GM 8.25" IFS Differential (Part No.14084)

Master Overhaul Kit For '99 & Newer GM 8.25" IFS Differential

from

$394.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, and marking compound with brush. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits GM 8.25″ IFS
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and silicone.
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

USA Standard Gear – 8.5" GM 5.38 Ring & Pinion (Needs Notched X/P) (Part No.36221)

8.5" GM 5.38 Ring & Pinion (Needs Notched X/P)

from

$349.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 8.50″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 5.38 ratio
See More

Yukon Gear – Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25" (Part No.55048)

Crush Sleeve Eliminator Kit For GM 8.5" & Chrysler 9.25"

from

$57.99
Product Features:
  • Crush sleeve eliminator kit for GM 8.5″, 8.6″ and Chrysler 9.25″ rear
See More

Dorman – Rear Axle Shaft – Right or Left Side (Part No.630-324)

Rear Axle Shaft - Right or Left Side

from

$536.99
Axle shaft damaged or bearings worn out? This axle shaft directly replaces the original equipment on certain vehicles, complete with all necessary application-specific installation components.

Product Features:
  • Direct replacement – this axle shaft replaces the original equipment on specific vehicle years, makes and models.
  • Complete kit – each shaft includes critical installation hardware and components needed for specific vehicle applications.
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

Dorman – Differential Carrier Assembly (Part No.697-390)

Differential Carrier Assembly

from

$1011.00
Hard use and poor lubrication can wear out a differential. Restore original performance with this replacement differential carrier assembly that includes all-new spider gears, differential pins and carrier housing.

Product Features:
  • Direct replacement – this differential carrier fits in place of this vehicle’s original equipment carrier
  • 100% new – this differential carrier uses all-new components, including spider gears and diff pin
  • Ready to install – this differential carrier is shipped pre-assembled and ready to install
  • Quality construction – precision cut gears and robust hardware for reliable performance
See More

Yukon Gear – Differential Cover B (Part No.33569)

Differential Cover B

from

$5.99
Differential Cover B

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Pro-King – Differential Cross Shaft (Part No.742G673)

Differential Cross Shaft

from

$28.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Pro-King – Differential Cover Gasket (Part No.742G303A)

Differential Cover Gasket

from

$31.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

MOOG – Differential Carrier Bushing (Part No.K201736)

Differential Carrier Bushing

from

$42.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Returns like-new steering
  • Long-lasting performance
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Motive Gear – Differential Spool (Part No.FS10-30)

Differential Spool

from

$187.99


Product Features:
  • FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949
See More

Pro-King – Differential Internal Nest Kit (Part No.742D717)

Differential Internal Nest Kit

from

$221.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

Popular 2008 Chevrolet Avalanche Differentials Categories

2008 Chevrolet Avalanche Differentials

Maybe you’re in the middle of a full rebuild of that 2008 Chevrolet Avalanche. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 302 different Differentials in our inventory ranging from $1.99 to $2,369.99. That means you can find the exact parts or products you need to keep that 2008 Chevrolet Avalanche running smoothly.

Differentials are only as good as their brand. We stock 19 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Chevrolet Avalanche. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2008 Chevrolet Avalanche, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 4,851 reviews in this category, some of the top rated parts include Differential Carrier Gear Kit with 3.9 stars and Multi Purpose Seal with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2008 Chevrolet Avalanche rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2008 Chevrolet Avalanche Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Chevrolet Avalanche demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Avalanche the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2008 Chevrolet Avalanche Differentials

What are the most purchased Differentials for the 2008 Chevrolet Avalanche?

Out of 302 Differentials for the 2008 Chevrolet Avalanche, the most popular in our inventory are:
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
Rear Differential Cover Gaskets
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $23.99
(7)
Bearings
Front Differential Pinion Bearings

What are the top-rated 2008 Chevrolet Avalanche Differentials?

Top-rated Differentials for your 2008 Chevrolet Avalanche based on customer reviews/ratings are:
Differential Carrier Gear Kit
from $231.99
(16)
Differential Carrier Gear Kit
“First set of gears were not complete. But staff reordered them, had them next day. Thanks”
Multi Purpose Seal
from $16.99
(14)
Multi Purpose Seal
“correct part easy to install”
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
“great”