2008 Cadillac Escalade Universal Joints
More 2008 Cadillac Escalade Universal Joints
Find your specific 2008 Cadillac Escalade original or aftermarket Universal Joints below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2008 Cadillac Escalade Universal Joints
Dorman – Help – U-Joint Repair Kit (Part No.81001)
from
$11.49
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R (Part No.41201)
from
$23.99
7.5″ and 8.5″ GM rear U/joint strap, Mech 3R.
Product Features:
See More
Product Features:
- u-joint strap
- Fits GM 7.5″, 7.625″ and 8.5″
- Mechanics 3R u-joint size
- One single strap
Yukon Gear – Dana 60, Dana 70, 1350, 1410, 10.25", And 9.5" U-Joint Strap Kit (Part No.41193)
from
$17.99
U/joint strap kit, 10.25″, 9.5″, Dana 60, Dana 70, 1350 & 1410.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits Ford 10.25″, GM 9.5″, Dana Spicer 60, 70, 70U and 70HD
- 1350 and 1410 u-joint size
- Includes two straps and four bolts
MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 355, 372 & 534G
- Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
Neapco – Universal Joint (Part No.1-0025)
MOOG Driveline Products – Universal Joint Strap Kit (Part No.492-10)
from
$15.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 330, 330A, 331 & 331A
- Contains two 1.66″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)
from
$26.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Neapco – Universal Joint (Part No.2-0053)
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.296)
from
$32.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.231)
from
$41.99
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- CORROSION PROTECTION — Exclusive MICRO SHIELDΓ┐ó coating protects against rust and corrosion
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
GMB – Universal Joint – Greasable (Part No.K1010481404GMB)
from
$27.77
Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.
Product Features:
See More
Product Features:
- Elliptical bearing design delivers reliable performance under the heaviest of loads
- Exclusive GMB Ultra-select bearing design exceeds OE specification
- Precision finish trunnions and bearing surfaces ensure durability
- Proven reliability in off-road conditions and harsh environments
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$56.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Driveworks – Universal Joint (Part No.DW-330)
from
$20.29
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
See More
Neapco – Universal Joint (Part No.2-3011)
GMB – Universal Joint – Greasable (Part No.K101037694GMB)
from
$35.13
Designed and built by GMB to handle the highest loads and excessive torque found in pickups, SUVs, 4x4s and off road vehicles.
Product Features:
See More
Product Features:
- Elliptical bearing design delivers reliable performance under the heaviest of loads
- Exclusive GMB Ultra-select bearing design exceeds OE specification
- Precision finish trunnions and bearing surfaces ensure durability
- Proven reliability in off-road conditions and harsh environments
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.295)
from
$55.99
Backed by superior materials and rigorous testing, MOOG Super Strength® universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST — Rugged design specifically engineered for applications with higher torque and horsepower
- CORROSION PROTECTION — Exclusive MICRO SHIELD coating protects against rust and corrosion
- STRONG AND DURABLE — Cold-forged, case-hardened and precision-ground alloy steel crosses for durability
- KEEPS DIRT OUT — Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASABLE DESIGN — Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Yukon Gear – Yoke For GM 8.25" IFS And 9.25" IFS (Mech 3R) (Part No.41078)
from
$239.99
Yukon yoke for GM 8.25″ IFS and 9.25″ IFS (mech 3R). 2.556″ snap ring span, 1.125″ cap diameter. Inside snap ring. This yoke uses inside snap rings. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.25″ IFS and 9.25″ IFS
- 30 spline
- Mechanics 3R u-joint size
- Inside snap ring design
- 2.556″ snap ring span
- 1.125″ cap diameter
- Strap style
Yukon Gear – Forged Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41093)
from
$354.99
Yukon forged yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
Popular 2008 Cadillac Escalade Universal Joints Categories
2008 Cadillac Escalade Universal Joints
Maybe you’re in the middle of a full rebuild of that 2008 Cadillac Escalade. Maybe you just need a couple of Universal Joints. Either way, Advance Auto Parts has 28 different Universal Joints in our inventory ranging from $4.59 to $354.99. That means you can find the exact parts or products you need to keep that 2008 Cadillac Escalade running smoothly.
Universal Joints are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 2008 Cadillac Escalade. Moog, DriveWorks, and Spicer are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Universal Joints for your 2008 Cadillac Escalade, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 604 reviews in this category, some of the top rated parts include Universal Joint with 3.9 stars and Universal Joint with 4.6 stars.
So if you’re in the market for aftermarket Universal Joints to keep your 2008 Cadillac Escalade rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Universal Joints Brands To Make Your 2008 Cadillac Escalade Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2008 Cadillac Escalade demands trusted brand parts and products to keep it running. Many trusted brands of Universal Joints make up Advance Auto Parts’ inventory, and all are ready to help make your Escalade the best it can be. Be sure to browse some of our top Universal Joints brands and parts.
Popular MOOG Driveline Products Universal Joints
We carry MOOG Driveline Products parts in our stock across U-Joint Strap Kits categories, plus more. For a 2008 Cadillac Escalade, our most popular MOOG Driveline Products Universal Joints include:
Top 2008 Cadillac Escalade Universal Joints from MOOG Driveline Products
MOOG Driveline Products products are another trusted brand when it comes to Universal Joints for your 2008 Cadillac Escalade. Popular MOOG Driveline Products parts include:
FAQs for 2008 Cadillac Escalade Universal Joints
What are the most purchased Universal Joints for the 2008 Cadillac Escalade?
Out of 28 Universal Joints for the 2008 Cadillac Escalade, the most popular in our inventory are:
What are the top-rated 2008 Cadillac Escalade Universal Joints?
Top-rated Universal Joints for your 2008 Cadillac Escalade based on customer reviews/ratings are:
from
$8.99
(5)
Universal Joint
“real nice piece. made in the U.S. has fitting for periodic lubrication in the center and in one cap. can’t beat the price.”
from
$4.59
(4)
Universal Joint
“This is a greasable joint that needs to be greased after installation. No issues installing it. I grease up the caps to help them slide into the yolk.”
