2008 Cadillac DTS Towing Products

Essential 2008 Cadillac DTS Towing Products

CURT – Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 45 Mins (Part No.120583)

Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 45 Mins

from

$278.99
A CURT trailer hitch is the key to pursuing your passions, whether you’re taking the family boat out for an afternoon on the water or packing up the mountain bikes for a day on the trails. This CURT class 2 hitch is perfect for towing a small trailer, such as a boat trailer, lightweight camper or utility trailer. It can also be used to mount a hitch cargo carrier or bike rack (never exceed the lowest-rated towing component). Like all CURT custom hitches, this class 2 trailer hitch is made for a vehicle-specific fit. It is engineered to seamlessly integrate with select years of the Cadillac DeVille and DTS (see application info to verify fitment). It is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. It is also equipped with 1-1/4″ x 1-1/4″ hitch receiver to accept the included ball mount. The ball mount that comes with this hitch kit has a 3/4″ trailer ball hole and can be positioned in the drop or rise orientation for level towing with your specific trailer (trailer ball not included). Like all CURT custom receiver hitches, this class 2 hitch is designed, manufactured, finished and tested with the utmost care. It is engineered for a precise fit, easy installation, maximum towing strength and an integrated look on the vehicle. It is also tested to SAE J684 protocols for safety. This class 2 trailer hitch is finished with our industry-leading dual-coat process for unparalleled rust, chip and UV resistance. It is descaled for a smooth surface, submersed in liquid A-coat for rust prevention inside and out, covered with a highly durable powder coat, and finally co-cured for a dependable shield against the elements. This class 2 hitch comes with a ball mount, hitch pin and mounting hardware for a complete installation.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

CURT – Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 45 Mins (Part No.12058)

Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 45 Mins

from

$263.99
Whatever the next checkpoint is on your adventure — whether it’s getting your bike on the trail before sunrise or making it to the campground before dark — CURT class 2 hitches let you Bring It with confidence. These receiver hitches are made to handle most light-duty towing applications and offer a custom fit for your vehicle. Typically used on full-size cars, crossovers, compact SUVs, minivans or even compact pickup trucks, a CURT class 2 trailer hitch complements the design of smaller vehicles. This particular class 2 hitch is made to be a custom hitch for certain years of the Cadillac DeVille and DTS (to verify vehicle compatibility, see application info). It offers a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. Class 2 trailer hitches can typically be used to tow a variety of lightweight trailers, such as a small utility trailer, small fishing boat trailer or popup camper (NOTE: Never exceed the lowest weight capacity of any towing component). They are also perfect for adding cargo space to your vehicle with a bike rack or cargo carrier. This class 2 hitch features a 1-1/4″ receiver tube to accept a ball mount shank or other hitch-mounted accessory. For safety, it is tested in accordance with SAE J684. A custom trailer hitch design requires extra care, and as such, CURT class 2 hitches are engineered using real vehicles and hands-on research. We use high-strength steel, robotic welding and rigorous testing to produce hitches that are built to fit your lifestyle. To ensure that each hitch will be a reliable extension of your vehicle, we also finish our hitches in a co-curing of liquid A-coat and black powder coat, giving them long-lasting rust and wear resistance.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

BOLT – GM – B Receiver Lock (Part No.7018446)

GM - B Receiver Lock

from

$34.99
One Key Technology Allows You To Use Your Ignition Key Eliminating Need For Extra Keys.
See More

Hopkins – Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A (Part No.46255)

Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A

from

$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:
  • For vehicles equipped with independent bulb turn signals or common bulb systems
  • Protects tow vehicle electronics from wiring shorts
  • Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
  • Powers up to 5.0 amps per output
  • Receives power directly from the battery
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

CURT – Powered Converter Wiring Kit (10 Amps) (Part No.55151)

Powered Converter Wiring Kit (10 Amps)

from

$20.79
When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle’s electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname “taillight converters”. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicle’s battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8″ ring terminal, a butt connector, a 14-1/2″ cable tie and eight 6″ cable ties. This wiring kit is rated at 10 amps and comes included with CURT powered electrical converters #59146, #59187, #59190, #59200 and #59201.

Product Features:
  • Routes power from vehicle battery to powered converter
  • Designed for use with battery-powered electrical converters
  • 20′ of 12 gauge cross-linked wire for flexible installation
See More

2008 Cadillac DTS Towing Products

You count on your 2008 Cadillac DTS to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 4 Towing Products ranging in price from $20.79 to $278.99, you’re sure to find everything you need for your 2008 Cadillac DTS.

Brands matter. If you want to shop a specific Towing Products brand, we stock 2 different brands like BOLT and CURT. 2008 Cadillac DTS Towing Products start as low as $20.79!

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 2008 Cadillac DTS below to get started!

FAQs for 2008 Cadillac DTS Towing Products

What are the most purchased Towing Products for the 2008 Cadillac DTS?

Out of 4 Towing Products for the 2008 Cadillac DTS, the most popular in our inventory are:
GM - B Receiver Lock
from $34.99
This product is not rated
GM – B Receiver Lock
Trailer Hitch Locks
Powered Converter Wiring Kit (10 Amps)
from $20.79
This product is not rated
Powered Converter Wiring Kit (10 Amps)
Trailer Wiring Harness
Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 45 Mins
from $263.99
This product is not rated
Trailer Hitch: 1-1/4" Receiver, 3,500 LB Capacity, Installs as low as 45 Mins
Trailer Hitch – Class I