2008 BMW M5 Performance and Racing Products

Essential 2008 BMW M5 Performance and Racing Products

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-10852)

Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Dry Air Filter For Easy Maintenance

from

$681.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro DRY S Air Filter For Maximum Convenience
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 51% cfm Flow Gain
  • Improved Throttle Response
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-10852)

Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow

from

$681.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 60% cfm Flow Gain
  • Improved Throttle Response
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 31 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-13030R)

Magnum FORCE Cold Air Intake: Gain up to 31 Horsepower! Oiled Air Filter For Maximum Airflow

from

$658.99
Large Five Layer Performance Air Filters: These 360-degree radial flow air filters feature a 4″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air and deliver the highest power gains in most cases. This media is perfect for street and/or track use.Dual Heat-Resistant Housings: The included massive air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of their air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed.Optional Dynamic Air Scoops: In addition to the system’s built-in air inlets, optional Dynamic Air Scoops (sold separately) are available to bring more cool air from the front of the vehicle into the intake housing (PN 54-12489-C).Dyno-Tuned Intake Tubes: This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

Product Features:
  • +26 lbs. x ft. TQ & +31 HP
  • Outflows Factory Intake by 19%
  • Measured Flow: 595 CFM @ 7″ H2O
  • Seals to hood when closed to reduce intake air temperature
See More

aFe POWER – Momentum Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-76301)

Momentum Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow

from

$756.99
aFe is proud to introduce the all new Momentum sealed intake system for the 2012-2016 BMW M5 (F10) with the V8-4.4L twin-turbo engine. This all new Momentum intake system produced up to 28hp and 31lbs. x ft. torque and outflows the factory intake by 29%. This highly engineered intake system uses twin black rotomolded airboxes that keeps warm engine air out for maximum performance. The housing use a unique Patent Pending filter to housing interface that enables us to use the largest filters possible while maintaining a simple hassle-free installation. The C.A.D. designed intake tubes are engineered to unleash all available horsepower and to fit perfectly. The kit comes complete will all necessary hardware.

Product Features:
  • Pro 5R Filter Media
  • 360 deg. Radial Flow Air Filter
  • 5 Layer Cotton Gauze High Flow Oiled Filter
  • Washable And Reusable
See More

K&N – Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter (Part No.69-2003TFK)

Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter

from

$599.99
The K&N 69-2003TFK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some BMW M6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-2003TFK air intake comes with dual black rubber topped K&N high-flow air filters with heat shields that install into the previous air box areas. Air is directed through the intake tubes into the engine’s throttle bodies for a guaranteed power gain. The intake tubes have an attractive flat black powder-coat finish that’s made to last and they accommodate the factory mass air sensors and a replacement silicone air injection hose. The oversized cone shaped air filters can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11272)

Magnum FORCE Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow

from

$730.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • Increased Horsepower And Torque
  • Improved Throttle Response
See More

2008 BMW M5 Performance and Racing Products

You count on your 2008 BMW M5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 1 Performance and Racing Products priced around $730.99, you’re sure to find everything you need for your 2008 BMW M5.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 1 different brands like aFe POWER. 2008 BMW M5 Performance and Racing Products start as low as $730.99!

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2008 BMW M5 below to get started!