2008 BMW 528xi Exhaust Parts
Find Your Specific 2008 BMW 528xi Exhaust Parts
Below you will find various in-demand BMW Exhaust Parts, components and accessories for your 2008 528xi. Advance Auto Parts has popular 528xi parts like Exhaust Fittings, Exhaust Manifold and Headers, Catalytic Converters and more. You’ll also find aftermarket and OEM Exhaust Parts for other 528xi model years. Select a category of 2008 BMW 528xi Exhaust Parts below and start saving instantly.
Popular 2008 BMW 528xi Exhaust Parts Categories
Essential Exhaust Parts for 2008 BMW 528xis
MagnaFlow – Universal HM Grade Federal / EPA Compliant Catalytic Converter (Part No.99204HM)
from
$179.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84205)
from
$206.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT : For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY : Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE : Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE : Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION : Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE : Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.51226)
from
$1154.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 51226. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51226 includes (4) Flat Washers, (1) Flange Gasket, (2) Bolts, (2) Nuts and interchanges with OE parts 18 40 7 563 732, 18 40 7 596 876. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51374)
from
$1055.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51374. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51374 includes (1) Flange Gasket, (1) Torca Clamp and interchanges with OE parts 18 30 7 541 847, 18 30 7 541 849, 18 30 7 541 850. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Rein – Copper Exhaust Nut With Shoulder, M7 (Part No.HWN0101)
from
$2.99
Rein Automotive exhaust nuts are manufactured with premium materials and are direct replacements for the OE.
Product Features:
See More
Product Features:
- Properly secures exhaust components.
- Direct replacement for correct fitment.
- Manufactured to strict engineering standards/specifications.
Rein – Dual Clamp 45X95 (Part No.EXC0022)
from
$21.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.
Product Features:
See More
Product Features:
- Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
- Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
- Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
- Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
Dorman – Exhaust Pipe Clamp (Part No.904-098)
from
$79.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles
- Ideal solution – engineered to help ensure secure connections between exhaust system components
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
MAHLE Original – Exhaust Pipe Flange Gasket (Part No.F32346)
from
$16.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Exhaust pipe gaskets from MAHLE Original are manufactured with the best materials to withstand high temperature applications.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Exhaust Pipe Flange Gasket (Part No.61842)
from
$13.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
CRP – Exhaust Nut (Part No.H1001417721CRP)
from
$1.92
Exhaust Nut
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10521-01)
from
$39.49
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Application specific molded rubber construction
- Engineered cross section
- Dana engineering-approved for fit, form and function
Victor Reinz – Exhaust Manifold Gasket (Part No.71-37134-00)
from
$7.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Able to withstand temperatures of up to 1400 Deg. F.
- Durable against wear and tear between manifolds and cylinder heads.
- Ensures an effective seal as manifold flanges warp in extreme conditions.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97283)
from
$41.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
MagnaFlow – Direct-Fit California Grade CARB Compliant Manifold Catalytic Converter (Part No.5531222)
from
$1377.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Manifold Catalytic Converter 5531222. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 5531222 includes (1) Flange Gasket and interchanges with OE parts 18 40 7 563 731, 18 40 7 596 875. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Upgrade your 2008 BMW 528xi with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2008 BMW 528xi, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Exhaust Parts are key to keeping your 528xi functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Exhaust Parts for the 2008 BMW 528xi, designed to meet your needs without breaking the bank.
From
Exhaust Fitting
replacements to
Exhaust Manifold and Headers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2008 BMW 528xi at great prices.
Our Exhaust Parts inventory for this model
ranges from just $1.92 to $1,377.99, with
an average price of $388.10.
Our 17 Exhaust Parts in stock come from 8 trusted brands, so you’re sure to find the right part for your 2008 BMW 528xi without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2008 BMW 528xi is always ready to roll. We’re committed to providing you with everything you need to keep your 528xi in top shape, all in one place.
Start shopping confidently below for your 2008 BMW 528xi!
Best-Selling Exhaust Fittings for 2008 BMW 528xis
Enhance the driving experience in your BMW with 2 quality Exhaust Fitting components, starting at $21.99.
Rein – Dual Clamp 45X95 (Part No.EXC0022)
from
$21.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.
Product Features:
See More
Product Features:
- Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
- Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
- Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
- Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
Dorman – Exhaust Pipe Clamp (Part No.904-098)
from
$79.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles
- Ideal solution – engineered to help ensure secure connections between exhaust system components
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Most Popular 2008 BMW 528xi Exhaust Manifold and Headers
Customize your BMW with 2 Exhaust Manifold and Headers products
like Exhaust Manifold and Headers and
Exhaust Manifold Bolts, all
priced under $1,377.99.
MagnaFlow – Direct-Fit California Grade CARB Compliant Manifold Catalytic Converter (Part No.5531222)
from
$1377.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Manifold Catalytic Converter 5531222. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 5531222 includes (1) Flange Gasket and interchanges with OE parts 18 40 7 563 731, 18 40 7 596 875. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
Rein – Copper Exhaust Nut With Shoulder, M7 (Part No.HWN0101)
from
$2.99
Rein Automotive exhaust nuts are manufactured with premium materials and are direct replacements for the OE.
Product Features:
See More
Product Features:
- Properly secures exhaust components.
- Direct replacement for correct fitment.
- Manufactured to strict engineering standards/specifications.
Top Picks for 2008 BMW 528xi Catalytic Converters
Upgrade BMW 528xis with top-quality Catalytic Converters parts, including 7 OEM and aftermarket selections for your 2008 model.
MagnaFlow – Universal HM Grade Federal / EPA Compliant Catalytic Converter (Part No.99204HM)
from
$179.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
MagnaFlow – Universal OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51204)
from
$194.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Compact, lightweight construction enables installation in confined areas, welding is required
MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.51226)
from
$1154.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Manifold Catalytic Converter 51226. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51226 includes (4) Flat Washers, (1) Flange Gasket, (2) Bolts, (2) Nuts and interchanges with OE parts 18 40 7 563 732, 18 40 7 596 876. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – Direct-Fit California Grade CARB Compliant Manifold Catalytic Converter (Part No.5531226)
from
$1145.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Manifold Catalytic Converter 5531226. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 5531226 includes (4) Flat Washers, (1) Flange Gasket, (2) Nuts, (2) Bolts and interchanges with OE parts 18 40 7 563 732, 18 40 7 596 876. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51374)
from
$1055.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51374. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51374 includes (1) Flange Gasket, (1) Torca Clamp and interchanges with OE parts 18 30 7 541 847, 18 30 7 541 849, 18 30 7 541 850. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Simplifies installation with essential gaskets and hardware being included in the box
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – Direct-Fit OEM Grade Federal / EPA Compliant Catalytic Converter (Part No.51375)
from
$1053.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51375. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51375 includes (1) Flange Gasket, (1) Torca Clamp and interchanges with OE parts 18 30 7 541 848, 18 30 7 541 849, 18 30 7 541 850. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
- Durable 308 stainless steel MIG welds
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Simplifies installation with essential gaskets and hardware being included in the box
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.84205)
from
$206.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT : For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY : Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE : Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE : Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION : Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- BUY WITH CONFIDENCE : Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty
In-Demand Exhaust Gaskets for 2008 BMW 528xis
Select from 3 premium Exhaust Gaskets parts for your 2008 BMW 528xi, with prices ranging from $7.99 to $41.49.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97283)
from
$41.49
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10521-01)
from
$39.49
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Application specific molded rubber construction
- Engineered cross section
- Dana engineering-approved for fit, form and function
Victor Reinz – Exhaust Manifold Gasket (Part No.71-37134-00)
from
$7.99
Product Features:
See More
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Able to withstand temperatures of up to 1400 Deg. F.
- Durable against wear and tear between manifolds and cylinder heads.
- Ensures an effective seal as manifold flanges warp in extreme conditions.
Most Sold 2008 BMW 528xi Exhaust Pipes
Explore our best-selling BMW parts for the 2008 528xi among 2 OEM and aftermarket options starting from $13.99.
MAHLE Original – Exhaust Pipe Flange Gasket (Part No.F32346)
from
$16.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.
Product Features:
See More
Product Features:
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- Exhaust pipe gaskets from MAHLE Original are manufactured with the best materials to withstand high temperature applications.
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
Felpro – Exhaust Pipe Flange Gasket (Part No.61842)
from
$13.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
See More
FAQs for 2008 BMW 528xi Exhaust Parts
Which Exhaust Parts are best-sellers for 2008 BMW 528xis?
Out of 17 Exhaust Parts that fit 2008 BMW 528xis, the following parts are the top sellers:
- Exhaust Pipe Flange Gasket (10307942) – $16.99
- Exhaust Manifold Gasket Set (11453843) – $41.49
- Dual Clamp 45X95 (11403750) – $21.99
What’s the price range for 2008 BMW 528xi Exhaust Parts?
Exhaust Part prices for the 2008 BMW 528xi start at $1.92 and go up to $1,377.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2008 BMW 528xi?
The average price for Exhaust Parts for the 2008 BMW 528xi is $388.10. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Exhaust Parts for my 2008 BMW 528xi?
The cheapest 2008 BMW 528xi Exhaust Parts we carry in stock are:
- Exhaust Nut (11845646) – $1.92
- Copper Exhaust Nut With Shoulder, M7 (50221555) – $2.99
- Exhaust Manifold Gasket (12547930) – $7.99
- Exhaust Pipe Flange Gasket (12482262) – $13.99
- Exhaust Pipe Flange Gasket (10307942) – $16.99
What are the top-rated Exhaust Parts that fit the 2008 BMW 528xi?
Out of 11 reviews by customers, our 2008 BMW 528xi Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2008 BMW 528xi and their top-rated products:
- Exhaust Gaskets
- Exhaust Manifold Gasket Set (11453843) – $41.49
What types of Exhaust Parts do you sell for my 2008 BMW 528xi?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 2008 BMW 528xi:
Can I get help with 2008 BMW 528xi Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Exhaust Parts and more.
What is your return policy for BMW 528xi Exhaust Parts?
Advance Auto Parts keeps returns simple. For new BMW 528xi Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
