2008 Audi A6 Valve Cover and Cylinder Heads

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

• Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
• Head bolt replacement recommended.
• Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

• AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
• All kits are application specific.
• Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
• Each set comes with special assembly lube to ensure proper torque when tightening.
• All kits are boxed and shrink wrapped.

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
• Validated for fit, form and function
• Unsurpassed quality you can trust

AJUSA is a leading global manufacturer of automotive gaskets, head bolt sets, seals and hydraulic lifters for European and Asian vehicles. AJUSA prides itself in offering the latest applications with quality that is equal to or exceeds that of the OE. Headquartered in Spain, AJUSA was established in 1972 as a gasket manufacturer, is an OE supplier, is ISO 9001 and ISO/TS 16949 certified, and ISO 14001 certified as a company that protects and respects the environment.

Product Features:

• AJUSA cylinder head bolts meet or exceed OE manufacturer specifications and are a perfect complement to AJUSA head sets and AJUSA head gaskets.
• All kits are application specific.
• Each set contains all the head bolts needed to complete the repair. V & H engines require 2 sets for a repair.
• Each set comes with special assembly lube to ensure proper torque when tightening.
• All kits are boxed and shrink wrapped.

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

• Direct replacement – this valve cover matches the original equipment part for fit and function.
• Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
• Cost-effective solution – offers original equipment performance at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

• OE Quality
• Optimized for strength
• High temperature strength
• Stem optimized to resist wear

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

• OE Quality
• Optimized for strength
• High temperature strength
• Stem optimized to resist wear

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

• OE Quality
• Optimized for strength
• Heat and corrosion resistant
• Chromium plated or nitrided
• Stem optimized to resist wear

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

• Meets or exceeds all original equipment specifications
• Design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Rocker Arm

Rocker Arm

Valve Keeper

Valve Keeper

Valve Keeper