2007 Volkswagen Touareg Engine Parts

Essential Engine Parts for 2007 Volkswagen Touaregs

Victor Reinz – Engine Oil Cooler O-Ring (Part No.41-10450-00)

Engine Oil Cooler O-Ring

from

$10.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Carquest Premium – Engine Oil Filler Cap: 10079, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10079)

Engine Oil Filler Cap: 10079, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack

from

$8.29
Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:
  • Provides proper seal to ensure leak prevention
  • Stops engine blow by
  • High quality construction
  • Meets all OEM specifications
See More

TRW – TRW Intake Valve (Part No.A4060377759TRW)

TRW Intake Valve

from

$33.03
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.9923)

Engine Mount: Front Left, Front Right, 1 Piece

from

$204.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 07-16; PORSCHE 04-10; VW 04-17;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2004-2017
  • Weight approx: 3 Lbs
  • HYDRAULIC
  • PART GROUP: 9923, 9923
See More

Elring – Cylinder Head Gasket Set (Part No.A8100134860ELR)

Cylinder Head Gasket Set

from

$93.24
Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:
  • Produced from spring steel for long-lasting flexibility of beads
  • Thermal stability up to 600F
  • Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
  • Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
  • Tightening instructions provided with each gasket for perfect results
See More

Carquest Premium – Engine Oil Level Sensor (Part No.LAC1024)

Engine Oil Level Sensor

from

$194.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Elring – Elring Oil Cooler Seal (Part No.A631088467ELR)

Elring Oil Cooler Seal

from

$9.12
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:
  • Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
  • Various designs specifically adapted to the area of application ensure excellent functionality and performance
  • High-performance FPM guarantees optimum leak tightness
See More

Iwis – Timing Chain (Part No.A5100413158IWI)

Timing Chain

from

$140.89
Timing Chain

MAHLE Original – Engine Oil Cooler Mounting Kit (Part No.B32538)

Engine Oil Cooler Mounting Kit

from

$13.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Elring – Oil Level Sender O-R (Part No.A6081319324ELR)

Oil Level Sender O-R

from

$8.27
Oil Level Sender O-R

MAHLE Original – Engine Oil Pump O-Ring (Part No.B32543)

Engine Oil Pump O-Ring

from

$7.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

INA – Camshaft Follower (Part No.A4010314568INA)

Camshaft Follower

from

$11.58
Camshaft Follower

Dayco – Timing Hydraulic Belt Actuator; 1 Piece, Meets Or Exceeds OE Quality (Part No.85031)

Timing Hydraulic Belt Actuator; 1 Piece, Meets Or Exceeds OE Quality

from

$131.99
Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.

Product Features:
  •  Designed to dampen noise and enhance belt life
  •  Keeps belt tension at a constant level for better performance
  •  Meets OE fit, form and function criteria
  • Prevents belt flapping
See More

Victor Reinz – Valve Cover Gasket: Direct Fit, 1 Piece (Part No.71-38957-00)

Valve Cover Gasket: Direct Fit, 1 Piece

from

$19.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds original equipment specifications.
  • Resistant to high and low temperatures and achieve a secure seal with low tightening forces.
See More

MTC – FUEL PUMP TANK SEAL (Part No.E3004321573MTC)

FUEL PUMP TANK SEAL

from

$6.67
FUEL PUMP TANK SEAL

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA3139)

Engine Camshaft Position Sensor Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

INA – Rocker Arm (Part No.A4040420929INA)

Rocker Arm

from

$16.54
Rocker Arm

Original Equipment – CAMSHAFT POSITION SE (Part No.A4015437890OEA)

CAMSHAFT POSITION SE

from

$58.98
CAMSHAFT POSITION SE

Corteco – Crankshaft Seal (Part No.A8060535755CFW)

Crankshaft Seal

from

$31.02
Crankshaft Seal

Victor Reinz – Engine Crankshaft Seal (Part No.81-34128-00)

Engine Crankshaft Seal

from

$9.29
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-05)

Engine Valve Stem Oil Seal Set

from

$23.49
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-03)

Engine Valve Stem Oil Seal Set

from

$34.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Febi – FEBI Timing Chain Kit (Part No.A5060846599FEB)

FEBI Timing Chain Kit

from

$385.78
Febi’s partner for engine timing is the renowned chain specialist IWIS. The German company is market leader in the timing chain sector and renowned for the top quality of its products. IWIS supplies timing chains for all Febi kits. Febi manufactures the remaining components for the timing chain kits to OE quality at its headquarters in Ennepetal. High quality parts are particularly important in engine timing to avoid costly engine damage. febi bilstein gives a 5-year or 100,000 km quality guarantee with its timing chain kits (subject to use of the correct engine oil recommended by the manufacturer). Febi timing chain kits contain all wear parts required for a high quality repair of the chain drive. To ensure a long engine life, all components of the timing chain kit should be replaced.

Product Features:
  • Contains everything you need to replace an engine timing chain in your vehicle
  • Offering the quality, reliability, and durability of OE
  • Manufactured to OE specification for fit, form, and function
See More

MAHLE Original – Fuel Pump Gasket (Part No.D32551)

Fuel Pump Gasket

from

$6.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Fuel Pump Gasket (Part No.41-77593-00)

Fuel Pump Gasket

from

$6.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Elring – Brake Vacuum Pump Ga (Part No.N4051455617ELR)

Brake Vacuum Pump Ga

from

$23.41
Brake Vacuum Pump Ga

Upgrade your 2007 Volkswagen Touareg with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2007 Volkswagen Touareg, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Engine Parts are key to keeping your Touareg functioning at its best. At Advance Auto Parts, we offer a wide selection of 122 Engine Parts for the 2007 Volkswagen Touareg, designed to meet your needs without breaking the bank. From Engine Mount replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2007 Volkswagen Touareg at great prices. Our Engine Parts inventory for this model ranges from just $1.78 to $515.25, with an average price of $73.04. Our 122 Engine Parts in stock come from 37 trusted brands, so you’re sure to find the right part for your 2007 Volkswagen Touareg without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Volkswagen Touareg, we stock popular OEM and aftermarket Engine Parts from top names like Carquest Premium, Imperial, Febi, and more. Carquest Premium Engine Parts start at just $8.29 and boast an impressive 4 stars average rating from customers. Imperial and Febi also bring quality to the table, with Engine Parts available starting at $1.78, and at an average 4 stars rating. With 87 customer reviews and counting, our 2007 Volkswagen Touareg Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Volkswagen Touareg is always ready to roll. We’re committed to providing you with everything you need to keep your Touareg in top shape, all in one place. Start shopping confidently below for your 2007 Volkswagen Touareg!

Best-Selling Engine Mounts for 2007 Volkswagen Touaregs

Enhance the driving experience in your Volkswagen with 3 quality Engine Mount components, starting at $201.61.

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.9923)

Engine Mount: Front Left, Front Right, 1 Piece

from

$204.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 07-16; PORSCHE 04-10; VW 04-17;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2004-2017
  • Weight approx: 3 Lbs
  • HYDRAULIC
  • PART GROUP: 9923, 9923
See More

Corteco – Corteco Engine Mount (Part No.A7000264579CFW)

Corteco Engine Mount

from

$204.54
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce engine vibration and noise Vibration Control Brochure
See More

Corteco – Corteco Engine Mount (Part No.A7000134359CFW)

Corteco Engine Mount

from

$201.61
CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce engine vibration and noise Vibration Control Brochure
See More

Most Popular 2007 Volkswagen Touareg Engine Gaskets and Seals

Customize your Volkswagen with 17 Engine Gaskets and Seals products like Valve Cover Gaskets, Rear Main Seal Sets, and Fuel Pump Gaskets, all priced under $54.99.

MAHLE Original – Fuel Pump Gasket (Part No.D32551)

Fuel Pump Gasket

from

$6.49
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Elring – Oil Level Sender O-R (Part No.A6081174889ELR)

Oil Level Sender O-R

from

$9.11
Oil Level Sender O-R

Felpro – VALVE STEM SEAL SET (Part No.SS 71074)

VALVE STEM SEAL SET

from

$33.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

National – Shaft Repair Sleeve (Part No.99333)

Shaft Repair Sleeve

from

$54.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71074-3)

Engine Valve Stem Oil Seal Set

from

$43.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Ajusa – Oil Pan Gasket (Part No.A6130860493AJU)

Oil Pan Gasket

from

$41.15
Oil Pan Gasket

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 72682-3)

Engine Valve Stem Oil Seal Set

from

$53.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
  • QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
  • ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
  • INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
  • COVERAGE — Available for domestic and foreign nameplate vehicles
See More

Victor Reinz – Valve Cover Gasket Set: Direct Fit, Includes Grommets, 8 Pieces (Part No.15-34292-01)

Valve Cover Gasket Set: Direct Fit, Includes Grommets, 8 Pieces

from

$42.49
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds original equipment specifications.
  • Resistant to high and low temperatures and achieve a secure seal with low tightening forces.
See More

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50930 R)

Engine Valve Cover Gasket Set

from

$33.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to help ensure a consistent and long-life seal
  • PRECISE DESIGN — Engineered to work with the embossed cover and pan flanges
  • PREVENTS OVERTIGHTENING — Features compression limiters incorporated into the design to help eliminate overtightening (application specific)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Elwis – Elwis Valve Cover Gasket (Part No.A8030377758ELW)

Elwis Valve Cover Gasket

from

$26.54
OE identical sealing solutions for the aftermarket The Elwis brand is synonymous with consistently high quality, outstanding delivery performances and – most importantly – innovative sealing solutions to the automotive aftermarket. Elwis unrivalled expertise in the field of advanced sealing solution engineering and management is passed on to our automotive aftermarket customers in the form of superb pricing, reliability and performance. All Elwis parts perform at least identically to their original counterparts.

Product Features:
  • OE Identical quality
  • Outstanding delivery performance
  • Innovative sealing solution
See More

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-05)

Engine Valve Stem Oil Seal Set

from

$23.49
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Elring – Brake Vacuum Pump Ga (Part No.N4051455617ELR)

Brake Vacuum Pump Ga

from

$23.41
Brake Vacuum Pump Ga

Elring – Valley Pan Gasket (Part No.A8044797586ELR)

Valley Pan Gasket

from

$15.94
Valley Pan Gasket

Elring – Elring Oil Cooler Seal (Part No.A631088467ELR)

Elring Oil Cooler Seal

from

$9.12
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:
  • Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
  • Various designs specifically adapted to the area of application ensure excellent functionality and performance
  • High-performance FPM guarantees optimum leak tightness
See More

Meistersatz – Valve Stem Seal (Part No.A807012825MEI)

Valve Stem Seal

from

$7.92
Valve Stem Seal

Victor Reinz – Fuel Pump Gasket (Part No.41-77593-00)

Fuel Pump Gasket

from

$6.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

MTC – FUEL PUMP TANK SEAL (Part No.E3004321573MTC)

FUEL PUMP TANK SEAL

from

$6.67
FUEL PUMP TANK SEAL

Top Picks for 2007 Volkswagen Touareg Camshafts

Upgrade Volkswagen Touaregs with top-quality Camshafts parts, including 19 OEM and aftermarket selections for your 2007 model.

Carquest Premium – Camshaft Sensor (Part No.CSC1138)

Camshaft Sensor

from

$28.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

NTK – Camshaft Position Sensor (Part No.EC0021)

Camshaft Position Sensor

from

$32.99
The Camshaft Position Sensor plays a vital role in your engine’s operation; to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. NTK Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:
  • THE NTK DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
  • OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
  • EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
  • PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

ABS Wheel Speed Sensor Connector

from

$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Original Equipment – CAMSHAFT POSITION SE (Part No.A4015437890OEA)

CAMSHAFT POSITION SE

from

$58.98
CAMSHAFT POSITION SE

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1528)

Engine Camshaft Position Sensor

from

$44.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:
  • Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

WSO – Camshaft Position Se (Part No.A4015185826WSO)

Camshaft Position Se

from

$27.77
Camshaft Position Se

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA3068)

Engine Camshaft Position Sensor

from

$109.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:
  • Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Worldpac – CAMSHAFT POSITION SE (Part No.A4015437890BRM)

CAMSHAFT POSITION SE

from

$102.36
CAMSHAFT POSITION SE

Delphi – Camshaft Position Se (Part No.A4015185826DEL)

Camshaft Position Se

from

$43.30
Camshaft Position Se

Dorman – Camshaft Position Sensor (Part No.962-191)

Camshaft Position Sensor

from

$28.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

INA – Camshaft Follower (Part No.A4010233008INA)

Camshaft Follower

from

$23.32
Camshaft Follower

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA3139)

Engine Camshaft Position Sensor Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Kolbenschmidt – Cam Follower (Part No.A4010420928KS)

Cam Follower

from

$14.35
Cam Follower

Felpro – CAMSHAFT FRONT SEAL SET (Part No.TCS 46183)

CAMSHAFT FRONT SEAL SET

from

$13.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Victor Reinz – Engine Camshaft Plug (Part No.71-31756-00)

Engine Camshaft Plug

from

$11.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

INA – Camshaft Follower (Part No.A4010314568INA)

Camshaft Follower

from

$11.58
Camshaft Follower

Original Equipment – Camshaft Retainer Bo (Part No.A4350457891OEA)

Camshaft Retainer Bo

from

$7.76
Camshaft Retainer Bo

Elring – Elring Cam Plug (Part No.A8031401198ELR)

Elring Cam Plug

from

$7.13
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:
  • Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
  • Various designs specifically adapted to the area of application ensure excellent functionality and performance
  • High-performance FPM guarantees optimum leak tightness
See More

INA – Cam Follower (Part No.A4010420928INA)

Cam Follower

from

$6.92
Cam Follower

In-Demand Engine Timing Parts for 2007 Volkswagen Touaregs

Select from 13 premium Engine Timing Parts parts for your 2007 Volkswagen Touareg, with prices ranging from $16.36 to $385.78.

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1308)

Engine Variable Valve Timing (VVT) Solenoid

from

$109.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Febi – FEBI Timing Chain Kit (Part No.A5060846599FEB)

FEBI Timing Chain Kit

from

$385.78
Febi’s partner for engine timing is the renowned chain specialist IWIS. The German company is market leader in the timing chain sector and renowned for the top quality of its products. IWIS supplies timing chains for all Febi kits. Febi manufactures the remaining components for the timing chain kits to OE quality at its headquarters in Ennepetal. High quality parts are particularly important in engine timing to avoid costly engine damage. febi bilstein gives a 5-year or 100,000 km quality guarantee with its timing chain kits (subject to use of the correct engine oil recommended by the manufacturer). Febi timing chain kits contain all wear parts required for a high quality repair of the chain drive. To ensure a long engine life, all components of the timing chain kit should be replaced.

Product Features:
  • Contains everything you need to replace an engine timing chain in your vehicle
  • Offering the quality, reliability, and durability of OE
  • Manufactured to OE specification for fit, form, and function
See More

Vaico – Camshaft Solenoid Ad (Part No.A5132810968VCO)

Camshaft Solenoid Ad

from

$329.59
The Vaico Variable Valve Timing (VVT) Solenoid is the Solenoid responsible for changing the position of the camshaft in the engine. It works by altering the supply of oil pressure to the camshaft and can either advance or retard camshaft position to provide the right performance. The Vaico Variable Valve Timing (VVT) Solenoid produce fewer emissions, improves gas mileage by controlling intake and exhaust valve timing and increase cylinder-air-supply to generate maximum horsepower.

Product Features:
  • High-quality O-rings and gaskets prevent premature oil leaks and help to maintain oil pressure
  • Improved steel components limits sticking during oil sludge buildup
  • 100% quality control and end-of-line testing
See More

Febi – Timing Chain Tensioner (Part No.A5110413161FEB)

Timing Chain Tensioner

from

$317.93
The FEBI Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision tension assembly
  • OE specified guide rail when supplied
  • Durable long life performance
See More

Autopart International Inc – Camshaft Adjuster So (Part No.A51322973604API)

Camshaft Adjuster So

from

$207.29
Camshaft Adjuster So

Vaico – Variable Valve Timing (VVT) Solenoid (Part No.A5132811092VCO)

Variable Valve Timing (VVT) Solenoid

from

$150.70
The Vaico Variable Valve Timing (VVT) Solenoid is the Solenoid responsible for changing the position of the camshaft in the engine. It works by altering the supply of oil pressure to the camshaft and can either advance or retard camshaft position to provide the right performance. The Vaico Variable Valve Timing (VVT) Solenoid produce fewer emissions, improves gas mileage by controlling intake and exhaust valve timing and increase cylinder-air-supply to generate maximum horsepower.

Product Features:
  • High-quality O-rings and gaskets prevent premature oil leaks and help to maintain oil pressure
  • Improved steel components limits sticking during oil sludge buildup
  • 100% quality control and end-of-line testing
See More

NTK – EN VAR TIME SOLENOID (Part No.VV0061)

EN VAR TIME SOLENOID

from

$144.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

Iwis – Timing Chain (Part No.A5100413158IWI)

Timing Chain

from

$140.89
Timing Chain

INA – Timing Chain Tensioner (Part No.A51102105908INA)

Timing Chain Tensioner

from

$135.45
The INA Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision tension assembly
  • OE specified guide rail when supplied
  • Durable long life performance
See More

Dayco – Timing Hydraulic Belt Actuator; 1 Piece, Meets Or Exceeds OE Quality (Part No.85031)

Timing Hydraulic Belt Actuator; 1 Piece, Meets Or Exceeds OE Quality

from

$131.99
Designed to absorb changes in timing belt tension caused by variations in engine temperatures, speed or the general wear and aging of the belt, the Dayco hydraulic timing belt actuator keep belt tension at a constant level. It reduces noise, prevents belt flapping and ensures proper timing effectiveness throughout the entire service life of the belt. The Dayco hydraulic timing belt actuator is manufactured to meet the critical OE quality, form, fit and function requirements necessary for superior performance.

Product Features:
  •  Designed to dampen noise and enhance belt life
  •  Keeps belt tension at a constant level for better performance
  •  Meets OE fit, form and function criteria
  • Prevents belt flapping
See More

INA – Timing Chain Tensioner (Part No.A5110284296INA)

Timing Chain Tensioner

from

$53.72
The INA Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision tension assembly
  • OE specified guide rail when supplied
  • Durable long life performance
See More

Vaico – Timing Guide Rail (Part No.A5040185945VCO)

Timing Guide Rail

from

$36.50
Timing Guide Rail

Febi – Timing Guide Rail (Part No.A5040160242FEB)

Timing Guide Rail

from

$16.36
Timing Guide Rail

Most Sold 2007 Volkswagen Touareg Valve Cover and Cylinder Heads

Explore our best-selling Volkswagen parts for the 2007 Touareg among 18 OEM and aftermarket options starting from $2.82.

Febi – Rocker Shaft Tower B (Part No.A4311448644FEB)

Rocker Shaft Tower B

from

$10.05
Rocker Shaft Tower B

TRW – Valve Keeper (Part No.A4070774061TRW)

Valve Keeper

from

$3.14
Valve Keeper

TRW – Valve Keeper (Part No.A40701891730TRW)

Valve Keeper

from

$2.82
Valve Keeper

Elring – Cylinder Head Gasket (Part No.A8100313703ELR)

Cylinder Head Gasket

from

$170.42
Cylinder Head Gasket

Elring – Cylinder Head Gasket Set (Part No.A8100495067ELR)

Cylinder Head Gasket Set

from

$167.90
Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:
  • Produced from spring steel for long-lasting flexibility of beads
  • Thermal stability up to 600F
  • Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
  • Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
  • Tightening instructions provided with each gasket for perfect results
See More

Elring – Cylinder Head Gasket Set (Part No.A8100313702ELR)

Cylinder Head Gasket Set

from

$88.19
Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:
  • Produced from spring steel for long-lasting flexibility of beads
  • Thermal stability up to 600F
  • Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
  • Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
  • Tightening instructions provided with each gasket for perfect results
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26616 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$84.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26629 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$84.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
See More

TRW – TRW Exhaust Valve (Part No.A4050169647TRW)

TRW Exhaust Valve

from

$66.75
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

TRW – TRW Intake Valve (Part No.A4060377759TRW)

TRW Intake Valve

from

$33.03
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

TRW – TRW Exhaust Valve (Part No.A4050186568TRW)

TRW Exhaust Valve

from

$26.70
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

TRW – TRW Exhaust Valve (Part No.A4050186570TRW)

TRW Exhaust Valve

from

$24.67
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

AE – Federal Mogul Intake Valve (Part No.A4060161704AE)

Federal Mogul Intake Valve

from

$18.29
The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:
  • OE Quality
  • Optimized for strength
  • High temperature strength
  • Stem optimized to resist wear
See More

TRW – TRW Intake Valve (Part No.A4060134874TRW)

TRW Intake Valve

from

$17.58
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

TRW – TRW Exhaust Valve (Part No.A4050161705TRW)

TRW Exhaust Valve

from

$16.64
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

INA – Rocker Arm (Part No.A4040420929INA)

Rocker Arm

from

$16.54
Rocker Arm

TRW – TRW Intake Valve (Part No.A4060134871TRW)

TRW Intake Valve

from

$14.57
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

KS – Valve Keeper (Part No.A407084736KS)

Valve Keeper

from

$3.14
Valve Keeper

Top-Rated Engine Parts Brands For Your 2007 Volkswagen Touareg

Shop for the best-rated brands offering Engine Parts and other products for your 2007 Volkswagen Touaregs. Below you’ll find some of our best rated Engine Parts from Carquest Premium, Imperial, and Febi, and more. Engine Parts from these brands that fit a 2007 Touareg start at just $1.78 and are rated as high as 4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Carquest Premium 2007 Volkswagen Touareg Engine Parts

When it comes to maintaining or upgrading your 2007 Volkswagen Touareg, using quality Engine Parts is essential to ensure durability and a perfect fit. Carquest Premium ticks all of those boxes. We offer a wide selection of Carquest Premium Engine Parts, specifically designed for the 2007 Volkswagen Touareg. With over 13 Carquest Premium brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $8.29, with an average price of just $89.51. Plus, with over 4 customer reviews and an average rating of 4 stars, you can trust that our Carquest Premium Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

ABS Wheel Speed Sensor Connector
from
$12.49
This product is not rated

ABS Wheel Speed Sensor Connector

“”

Engine Camshaft Position Sensor
from
$44.99
This product is not rated

Engine Camshaft Position Sensor

“”

Camshaft Sensor
from
$28.99
This product is not rated

Camshaft Sensor

“”

Popular Imperial 2007 Volkswagen Touareg Engine Parts

Imperial auto parts is one of the highest quality Engine Part brands in the market. Any 2007 Volkswagen Touareg owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 2007 Touareg, Advance Auto Parts carries a full inventory of 3 Imperial Engine Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Imperial Engine Parts range from $156.99 to $239.99, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

Ultra-Cool Engine Oil Cooler Kit
from
$184.99

(1)

Ultra-Cool Engine Oil Cooler Kit

“Purchased for a 2005 Yukon XL Denali. Exceeded expectations for an aftermarket product”

Econo-Kool® Engine Oil Cooler
from
$156.99

(3)

Econo-Kool® Engine Oil Cooler

“Good price perfect fit had all the parts I needed good quality”

Engine Oil Cooler
from
$239.99
This product is not rated

Engine Oil Cooler

“”

FAQs for 2007 Volkswagen Touareg Engine Parts

Which Engine Parts are best-sellers for 2007 Volkswagen Touaregs?

Out of 122 Engine Parts that fit 2007 Volkswagen Touaregs, the following parts are the top sellers:

What’s the price range for 2007 Volkswagen Touareg Engine Parts?

Engine Part prices for the 2007 Volkswagen Touareg start at $1.78 and go up to $515.25 for the most premium parts.

What’s the average price of a Engine Part for a 2007 Volkswagen Touareg?

The average price for Engine Parts for the 2007 Volkswagen Touareg is $73.04. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Volkswagen Touareg model years?

Yes, we currently carry Engine Parts for 13 model years of Volkswagen Touaregs between 2004 and 2017. Engine Parts are bought most frequently for the following model years: 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, and 2009.

What are the cheapest Engine Parts for my 2007 Volkswagen Touareg?

The cheapest 2007 Volkswagen Touareg Engine Parts we carry in stock are:

What types of Engine Parts do you sell for my 2007 Volkswagen Touareg?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2007 Volkswagen Touareg:

Can I get help with 2007 Volkswagen Touareg Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Engine Parts and more.

What is your return policy for Volkswagen Touareg Engine Parts?

Advance Auto Parts keeps returns simple. For new Volkswagen Touareg Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.