2007 Toyota RAV4 Steering and Chassis Parts

Below you will find various in-demand Toyota Steering and Chassis Parts, components and accessories for your 2007 RAV4. Advance Auto Parts has popular RAV4 parts like Power Steering Parts, Steering Shafts, Ball Joints and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other RAV4 model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2007 Toyota RAV4 Steering and Chassis Parts below and start saving instantly.

Popular 2007 Toyota RAV4 Steering and Chassis Parts Categories

Power Steering Coolers

Lower Control Arm and Ball Joints

Tie Rod Ends

Front Alignment Kits

Power Steering Pressure Hoses

Camber Kits

Alignment Camber Lateral Links

Steering Knuckles

Sway Bar Link Bushing Kits

Rack and Pinion Boots

Pinion Bearings

Sway Bar Bushings

Control Arm Ball Bushings

Alignment Toe Arms

Pump Shaft Seals

Power Steering Pressure Sensor Connector

Alignment Camber Bolt Assortments

Essential Steering and Chassis Parts for 2007 Toyota RAV4s

from

$299.99

This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit..

Product Features:

Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models.
Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
Corrosion resistant – salt spray testing and premium coating help ensure future longevity

from

$32.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$8.99

Camber Bolt Kit

from

$252.99

This suspension knuckle is precision-engineered and rigorously tested to provide reliable replacement for the original knuckle on specific vehicles.

Product Features:

Direct replacement – this suspension knuckle is designed to replace the original knuckle on specific vehicles.
Reliable fit – precision-engineered to match the dimensions of original components.
Trustworthy construction – manufactured to strict standards using durable materials
Rigorously tested – thorough quality control measures ensure longevity

from

$37.81

The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$46.85

The Sankei 555 Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$69.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
STRONG AND DURABLE — Engineered to match or exceed OE requirements
RESTORES RIDE — Provides revamped steering and handling feel
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$21.33

Steering Rack Boot K

from

$51.99

This control arm ball bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$2.79

Product Features:

Brand may vary by location

from

$36.49

3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:

Medium-duty power steering oil cooler
Size: 3/4″ x 2-1/2″ x 12″
For vehicle with 3/8″ ID power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$395.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$402.99

This alignment camber lateral link is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$434.99

Can solve excessive tire wear and steering issues
Provides like-new steering, ease of installation and longer life
Can bring vehicles back to factory specification
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$101.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$27.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$409.99

This alignment toe arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$89.99

This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$25.99

STAB BAR BUSHING KIT

from

$14.74

The MTC Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$77.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$86.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$29.99

Advanced corrosion-resistant electro-coating to reduce rust

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$60.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Coated or plated for corrosion protection
Ball joint is pre-greased
Easy access wrench flat allows for the use of a socket for easy installation and removal
Full ball stud

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

Upgrade your 2007 Toyota RAV4 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 2007 Toyota RAV4, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Steering and Chassis Parts are key to keeping your RAV4 functioning at its best. At Advance Auto Parts, we offer a wide selection of 63 Steering and Chassis Parts for the 2007 Toyota RAV4, designed to meet your needs without breaking the bank. From Power Steering Part replacements to Steering Shafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 2007 Toyota RAV4 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.79 to $649.99, with an average price of $108.22. Our 63 Steering and Chassis Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2007 Toyota RAV4 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Toyota RAV4, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Imperial, Moog, Carquest Premium, and more. Imperial Steering and Chassis Parts start at just $11.49 and boast an impressive 4 stars average rating from customers. Moog and Carquest Premium also bring quality to the table, with Steering and Chassis Parts available starting at $11.99, and at an average 4 stars rating. With 1,458 customer reviews and counting, our 2007 Toyota RAV4 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Toyota RAV4 is always ready to roll. We’re committed to providing you with everything you need to keep your RAV4 in top shape, all in one place. Start shopping confidently below for your 2007 Toyota RAV4!

Best-Selling Power Steering Parts for 2007 Toyota RAV4s

Enhance the driving experience in your Toyota with 11 quality Power Steering Part components, starting at $4.99.

show more show less

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$4.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$452.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE¿s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$27.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$25.13

The Febi Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Manufactured to meet or exceed OE specifications

from

$649.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR Rack and Pinions are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Includes: Factory Installed OE Mounting Bushings, Inner Tie Rods, Jam Nuts (as required), and Installation Instructions
Precision Routed and Constructed Fluid Transfer Tubes
Manufactured to meet or exceed OE requirements
Engineering, test, and quality validation in the USA

from

$449.99

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$339.99

NEW RACK & PINION

Top Picks for 2007 Toyota RAV4 Ball Joints

Upgrade Toyota RAV4s with top-quality Ball Joints parts, including 10 OEM and aftermarket selections for your 2007 model.

show more show less

from

$40.49

Advanced corrosion-resistant electro-coating to reduce rust

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Pre-applied thread locker keeps fasteners from loosening due to vibration

from

$79.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$191.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$59.99

Hardened ball stud made of OE equivalent or better materials to withstand higher loads
Easy to install.
Construction and design validated by MOOG engineers
Premium forged housing with increased cross section of up to 52% more material in key areas
Broad coverage for foreign and domestic applications
Designed to meet or exceed original equipment performance

from

$189.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$177.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$169.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$175.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$51.99

This control arm ball bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$61.99

Matches OE form, fit and function
Coated or plated for corrosion protection
Necessary hardware supplied as needed for a complete installation
Hardware functionality matches original design requirements
Application specific for this vehicle

In-Demand Sway Bars for 2007 Toyota RAV4s

Select from 20 premium Sway Bars parts for your 2007 Toyota RAV4, with prices ranging from $6.39 to $79.99.

show more show less

from

$58.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Wrench flats ensure easy installation and removal
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$47.49

Sway Bar Link Kit

from

$79.99

EASY TO INSTALL — Wrench flats ensure easy installation and removal
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
KEEPS DIRT AND WATER OUT — Sealed boot shields internal components from wear-causing contaminants
STRONG AND DURABLE — Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$53.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$55.99

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$70.99

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$24.99

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$16.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$37.81

The CTR Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$11.99

PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$24.49

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$66.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$62.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$55.06

Sway Bar Link

from

$46.46

Sway Bar Link

from

$26.49

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$14.85

Sway Bar Bushing

from

$14.74

The MTC Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$12.41

The Febi Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$6.39

Sway Bar Bushing

Most Sold 2007 Toyota RAV4 Tie Rods

Explore our best-selling Toyota parts for the 2007 RAV4 among 8 OEM and aftermarket options starting from $22.29.

show more show less

from

$43.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$43.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$43.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$29.99

Advanced corrosion-resistant electro-coating to reduce rust

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$29.99

Advanced corrosion-resistant electro-coating to reduce rust

Product Features:

Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)

from

$79.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$39.49

CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$22.29

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

Top-Rated Steering and Chassis Parts Brands For Your 2007 Toyota RAV4

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 2007 Toyota RAV4s. Below you’ll find some of our best rated Steering and Chassis Parts from Imperial, Moog, and Carquest Premium, and more. Steering and Chassis Parts from these brands that fit a 2007 RAV4 start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Imperial 2007 Toyota RAV4 Steering and Chassis Parts

When it comes to maintaining or upgrading your 2007 Toyota RAV4, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Imperial ticks all of those boxes. We offer a wide selection of Imperial Steering and Chassis Parts, specifically designed for the 2007 Toyota RAV4. With over 4 Imperial brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.49, with an average price of just $23.32. Plus, with over 208 customer reviews and an average rating of 4 stars, you can trust that our Imperial Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$28.49

(83)

Power Steering Oil Cooler

“Installed and properly working”

from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

Popular Moog 2007 Toyota RAV4 Steering and Chassis Parts

Moog auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 2007 Toyota RAV4 owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2007 RAV4, Advance Auto Parts carries a full inventory of 16 Moog Steering and Chassis Parts. Plus you will be keeping your Toyota in peak condition while saving money because prices on these Moog Steering and Chassis Parts range from $11.99 to $434.99, plus, with more than 32 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$16.99

This product is not rated

Stabilizer Bar Bushing Kit

“”

from
$189.99

This product is not rated

Control Arm and Ball Joint Assembly

“”

from
$24.99

This product is not rated

Stabilizer Bar Bushing Kit

“”

FAQs for 2007 Toyota RAV4 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 2007 Toyota RAV4s?

Out of 63 Steering and Chassis Parts that fit 2007 Toyota RAV4s, the following parts are the top sellers:

Stabilizer Bar Link (21880266) – $58.99
Transmission Oil Cooler Reinstallation Kit (5670023) – $20.79
Stabilizer Bar Link (12141936) – $53.99

What’s the price range for 2007 Toyota RAV4 Steering and Chassis Parts?

Steering and Chassis Part prices for the 2007 Toyota RAV4 start at $2.79 and go up to $649.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 2007 Toyota RAV4?

The average price for Steering and Chassis Parts for the 2007 Toyota RAV4 is $108.22. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Toyota RAV4 model years?

Yes, we currently carry Steering and Chassis Parts for 28 model years of Toyota RAV4s between 1996 and 2024. Steering and Chassis Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Steering and Chassis Parts for my 2007 Toyota RAV4?

The cheapest 2007 Toyota RAV4 Steering and Chassis Parts we carry in stock are:

Oil Seal (10426036) – $2.79
Taper Bearing Cup (5052521) – $4.99
Sway Bar Bushing (12598204) – $6.39
Mounting Kit System (6014844) – $11.49
Stabilizer Bar Bushing Kit (11315337) – $11.99

What are the top-rated Steering and Chassis Parts that fit the 2007 Toyota RAV4?

Out of 1,458 reviews by customers, our 2007 Toyota RAV4 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 2007 Toyota RAV4 and their top-rated products:

Sway Bars
- Sway Bar Link Kit (11049755) – $47.49
- Stabilizer Bar Link (21880266) – $58.99
- Stabilizer Bar Link (99992636) – $79.99
Tie Rods
- Sway Bar Link Kit (11049755) – $47.49
- Stabilizer Bar Link (21880266) – $58.99
- Stabilizer Bar Link (99992636) – $79.99

What types of Steering and Chassis Parts do you sell for my 2007 Toyota RAV4?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 2007 Toyota RAV4:

Can I get help with 2007 Toyota RAV4 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Steering and Chassis Parts and more.

What is your return policy for Toyota RAV4 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Toyota RAV4 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Toyota RAV4 Steering and Chassis Parts

Dorman – Steering Shaft Assembly (Part No.425-452)

MOOG – Camber Adjusting Kit (Part No.K90476)

Driveworks – Camber Bolt Kit (Part No.DW-K90476)

Dorman – Right Rear Knuckle (Part No.698-152)

CTR – Sway Bar Link (Part No.L1030322120CTR)

Sankei 555 – Sway Bar Link (Part No.L1030140427SNK)

MOOG – Ball Joint (Part No.K90309)

EMPI – Steering Rack Boot K (Part No.M1030935151EMP)

Dorman – Suspension Knuckle Bushing (Part No.523-273)

Driveworks – Oil Seal (Part No.S-221820)

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.26-2616)

Dorman – Alignment Camber Lateral Link (Part No.528-291)

MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Banjo x 16mm Male Inv. Flare (Part No.40043)

Carquest Premium – Back Up Light Connector (Part No.PTA1061)

Dorman – Alignment Toe Arm (Part No.527-967)

Dorman – Suspension Control Arm (Part No.524-011)

MOOG – STAB BAR BUSHING KIT (Part No.K202145)

MTC – Sway Bar Bushing (Part No.L1050235618MTC)

Dorman – Suspension Control Arm (Part No.521-693)

Dorman – Suspension Control Arm (Part No.524-136)

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.310-233787)

Beck/Arnley – Inner Tie Rod End (Part No.101-5076)

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Transmission Oil Cooler Hose (Part No.248001)

Imperial – Power Steering Oil Cooler (Part No.241009)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Driveworks – Taper Bearing Cup (Part No.S-M-86610)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2694)

Carquest Premium – Back Up Light Connector (Part No.PTA1061)

Febi – Steering Rack Boot (Part No.M1010463018FEB)

PWR – New Manual Rack and Pinion (Part No.45-1252)

Cardone – Remanufactured Rack and Pinion Assembly (Part No.1G-2697)

Atlantic Automotive Eng – NEW RACK & PINION (Part No.4577N)

Driveworks – Oil Seal (Part No.S-221820)

Dorman – Steering Shaft Assembly (Part No.425-452)

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.410-233788)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK621848)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620586)

MOOG – Ball Joint (Part No.K500062)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK620587)

Dorman – Suspension Control Arm (Part No.524-477)

MOOG – Control Arm and Ball Joint Assembly (Part No.RK100170)

Dorman – Suspension Control Arm (Part No.524-478)

Dorman – Suspension Knuckle Bushing (Part No.523-273)

Beck/Arnley – Ball Joint Front Lower (Part No.101-5777)

MOOG – Stabilizer Bar Link (Part No.K750043)

Driveworks – Sway Bar Link Kit (Part No.DW-K750043)

MOOG – Stabilizer Bar Link (Part No.K750257)

Carquest Premium – Stabilizer Bar Link (Part No.644-233795)

Driveworks – Stabilizer Bar Link (Part No.DW-K750257)

Carquest Premium – Stabilizer Bar Link Kit (Part No.540-233796)

MOOG – Stabilizer Bar Bushing Kit (Part No.K201482)

MOOG – Stabilizer Bar Bushing Kit (Part No.K201279)

CTR – Sway Bar Link (Part No.L1030322120CTR)

MOOG – Stabilizer Bar Bushing Kit (Part No.K200829)

Rare Parts – Sway Bar Frame Bushing (Part No.RP22322)

Rare Parts – Sway Bar Link (Part No.RP19706)

Rare Parts – Sway Bar Repair Kit (Part No.RP22280)

International Suspension Group – Sway Bar Link (Part No.L1030322120ISG)

Sankei 555 – Sway Bar Link (Part No.L1030322119SNK)

Rare Parts – Sway Bar Bushing (Part No.RP22599)

MTC – Sway Bar Bushing (Part No.L1050235619MTC)

MTC – Sway Bar Bushing (Part No.L1050235618MTC)

Febi – Sway Bar Bushing (Part No.L1050235619FEB)

ACKOJA – Sway Bar Bushing (Part No.L1050328909ACK)

MOOG – Tie Rod End (Part No.EV800328)

MOOG – Tie Rod End (Part No.ES800053)

MOOG – Tie Rod End (Part No.ES800054)

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.310-233786)

Carquest Premium – OE matched design for Form, Fit, and Function (Part No.310-233787)

Rare Parts – Tie Rod End (Part No.RP28778)

Carquest Premium – Tie Rod End (Part No.300-324349)

Rare Parts – Tie Rod End (Part No.RP28685)