2007 Toyota 4Runner Bodies and Fender Parts

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee.

Product Features:

• Maximize Axle Travel
• Smooth Axle Engagement And Disengagement
• Enhance Suspension Performance
• ProgressiveáSpring Rate
• Absorbs Energy And Cushions Road Shocks
• Stronger Than OEM Bumpstops
• Easy Installation

The oft overlooked mudflap. One of those protective accessories you Do not realize you need until it is too late. Rocks, sticks, and other road debris can wreak havoc on your cars finish and underside. Dee Zee Mud Flaps protect your vehicle and trailer from damage and add a classic stylistic element to your vehicle.

Product Features:

• Classic Styling Of Brite-Tread Aluminum
• Front Or Rear Wheel Protection
• Radius Notch Contours To The Fender Well
• Protected By A BriteGard Powder Coat Finish

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Stainless or Black

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

Dee Zee NXc Steps (board) The NXc step is designed for today crossover utility vehicles (CUV). A universal board combined with custom fit brackets (sold separately) fit all listed applications. The board is available in three different finishes for step and trim, Black or Chrome, Black or Black, Stainless or Black. Lightweight aluminum powder coated frame. Full length protective accent trim. Slip resistant raised rubber grommets on step area. Required custom fit bracket kits sold separately. Black or Chrome

Product Features:

• Lightweight Aluminum Powder Coated Frame
• Full Length Protective Accent Trim
• Slip Resistant Raised Rubber Grommets On The Step Area
• NRT(TM) Powder Coated Steel Braces
• No Drilling Required

For some, it’s more than just a drive. It’s about definition — finding the rush that comes with your hands on the wheel and your foot on the gas — and it starts by stepping into your vehicle with confidence. ARIES AeroTread running boards give new definition to your drive with their sleek design, full-length treads and flawless finish. They feature unencumbered aluminum construction and a custom contour to redefine your look and offer a solid step up. Made specifically for today’s crossover and SUV, ARIES AeroTread running boards are marked for their aerodynamic look and lightweight build. They are constructed from an extruded aluminum base, making them strong and impervious to the elements. Each set of running boards features sleek, curved edges with tapered ends to seamlessly blend with the body of your vehicle. To give you the exact, customized look you want, AeroTread running boards come with one of two front-trim finish options: polished stainless steel or black carbide powder-coated stainless steel. They are also equipped with a 5″ wide, hard plastic step pad that runs the entire length of the board, providing a non-skid surface no matter where you place your foot. AeroTread running boards install using a track mounting system to attach vehicle-specific brackets, and pre-existing holes in the vehicle’s frame are used to eliminate drilling, speed up installation and ensure stable footing. This set of running boards is designed to fit specific years of the Toyota 4Runner (see application information to verify compatibility with your vehicle). The mounting brackets are made from steel and are coated in a powder coat finish for long-lasting dependability. Whatever road you choose, define your drive with ARIES AeroTread running boards.

Product Features:

• Sleek design with rounded ends to complement the look of modern SUVs and CUVs
• Extruded aluminum base to be lightweight and rust-free
• Polished stainless steel front trim piece for a distinct, rust-free accent
• Flat profile and 5″ width provide a comfortable step
• Full-length, tough plastic treads offer a reliable, non-skid surface
• Universal track mounting system for easy, secure installation
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector Greatly Reduces Sunroof Wind Noise And Air Turbulence
• Prevents The Rain From Entering The Sunroof Opening While Driving
• Helps Reduce Heat Buildup Inside The Vehicle
• Available In 5 Different Sizes For Perfect Fit
• No Drill Installation
• Installs Quickly And Easily With 3M Automotive-Grade Adhesive

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount
• Quality construction – manufactured from premium materials for a long service life
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

• Replace to Restore Ride Height
• Gain Durability
• Stronger Than Original Rubber Mounts

This exterior molding clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

• Direct replacement – this exterior molding clip matches the fit and function of the factory part on specified years, makes and models
• Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

Saddle mounted step pad. Molded oval end caps. Features cradle mounted tubes and no drill installation. Black powder coated mild steel finish.

Product Features:

• Vehicle Specific Mounting Kit Required; Sold Separately
• 4 in. Oval Tube
• Injection Molded Polymer Step Pad
• Molded Oval End Caps
• Bolt-On Installation; No Drilling Required
• 3 Year Warranty

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. A

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required
• 3 Year Warranty

Westins Pro Traxx 4 Oval Nerf Step Bars feature a 4″ oval tube with a heavy-duty step pad that provides a wider and more secure step area. They feature 30° factory style bends that have seamless domed ends so there are no end-caps or exposed bolt heads. Applications are bolt-on installation.

Product Features:

• 30 Degree Factory Style Bends At Each End Of Tube
• Fully Welded Domed Ends
• Injection Molded Polymer Step Pad
• Injection Molded Bracket Covers Incl. On Some Apps
• 4 in. Wide Step Area With Westin Logo
• Bolt On Installation; No Drill Required

Westin R5 Nerf Step Bars have 5 inch wide step area with a unique molded polymer step pad design. R5 Nerf Step Bars are rocker panel mounted and include injection molded bracket covers for a full and stylized appearance. R5 LED Light Kit upgrade is available, sold separately.

Product Features:

• Mount Kit Included
• Rocker Panel Mounted
• 5 in. Wide Step Area
• Injection Molded Polymer Step Pad
• Incl. Injection Molded Bracket Covers
• Optional LED Light Kit Available [Sold Separately]

Westins HDX Drop Nerf Step Bars provide the rugged look and function that truck owners need and want. They feature a solid 1-piece steel construction and heavy duty punch plates creating high traction step areas. The HDX Drop Nerf Step Bars also feature Westins notched bar design which provides more than 2″ of additional toe/heel placement versus competitive brands. Available in a textured black finish that complements Westin HDX Bumpers. The HDX Drop Steps have vehicle specific applications and include a vehicle specific mount kit, installation hardware and instructions.

Product Features:

• Die Stamped Stainless Steel Step Areas For Maximum Traction
• Over 2 More Inches Of Toe/Heel Step Area Than Our Competitors
• Removable Step Plates For Easy Cleaning
• Fits Tight To Rocker Panel For Solid Fit And Rugged Look
• Solid 1-Piece Construction
• Bolt-On Installation No Drilling Required For Most Applications
• Mount Kit Included

ARIES 3″ side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3″ nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3″ round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3″ nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Toyota 4Runner (see application info to verify fitment). ARIES 3″ round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.

Product Features:

• Unique bends to contour to the body of the vehicle
• Custom, non-skid step pads for safe entry and exit
• 3″ diameter, heavy-wall tube design
• High-strength carbon steel construction
• Highly rust-resistant semi-gloss black powder coat and E-coat finish
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

New Standard Replacement Driver Side Fender Liner

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Fender Liner, 4WD

Product Features:

• 4WD, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Driver Side Fender Liner/Splash Shield

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Passenger Side Fender Liner/Splash Shield

Product Features:

• Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Passenger Side Fender Liner, 4WD

Product Features:

• 4WD, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Driver Side Fender Liner/Splash Shield

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Standard Replacement Passenger Side Fender Liner/Splash Shield

Product Features:

• Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle