from

$197.99

When a vehicle idles roughly, displays a malfunction indicator lamp or sets DTCs, the cause might be oil ingress or dirt and carbon buildup in the electronic throttle body. This 100% new electronic throttle body is designed to match the fit and function of the original equipment throttle body on specified vehicles. It features a non-contact Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to help prevent future failures.

Product Features:

Upgraded design – this plug-and-play replacement throttle body features a contactless Hall effect sensor and proprietary Sensor Shield butterfly shaft seal to prevent future failures
New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience

from

$192.99

Throttle Body with Throttle Actuator

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps provide air flow for proper fuel/air mixture
Allows for a quick throttle response
Assists in cold engine starts
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$141.99

OE Throttle Body Assemblies. The throttle body is an essential part of the inlet air stream of the modern gasoline engine. In combination with the electronic throttle control system, the throttle body assembly is designed to control the amount of fresh air entering the engine. Manufactured in U.S.A. on OE production line.

Product Features:

Actual OE Product
Plug & Play – No flash update needed
Exact fit, form, and function
Manufactured worldwide on OE production lines
Contains an actuator, a throttle plate and a throttle position sensor (potentiometer), which are integrated into one housing

from

$281.99

Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:

Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
Each unit is guaranteed to fit and function like the original – at a fraction of the typical market price.

from

$5.79

GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps prevent excess air form entering the intake
Helps seal the intake and throttle from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$87.99

ACDelco GM Original Equipment Engine Intake Manifold Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$3.79

These bolts are manufactured using durable materials and corrosion-tested to ensure required strength and longevity.

Product Features:

Durable materials – manufactured to specific thread tolerance standards
Corrosion tested – hardware undergoes salt spray testing to ensure corrosion resistance
Multipurpose usefulness – can be used in a variety of applications, from auto to home
Trustworthy quality – backed by team of professional engineers and quality control specialists in the United States

from

$7.12

ACDelco offers a full line of quality GM OE intake manifold gaskets that meet Original Equipment standards. When you’re in need of intake gaskets and gasket sets, look to ACDelco for quality, value and guaranteed performance. Validated by GM Engineering which assures proper form, fit and function. This is important on high labor-hour manifold repairs.

Product Features:

Both upper and lower intake manifolds with matching gaskets sets available.
Only ACDelco and GM offer complete later model GM coverage.
Design enhanced to incorporate updates, upgrades and Technical Service Bulletins (TSBs.)

from

$57.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
For those who demand the maximum durability and reassurance of steel carrier gasket designs, Victor Reinz offers a broad range of MaxDry STL gaskets.
It is critical that the molded rubber sealing areas resist all the possible fuels, coolants and oil formulations used in these vehicles. Victor Reinz engineers have utilized only premium grade FKM synthetic rubber for this purpose.
Coverage includes GM, Ford, Toyota, Nissan, and Mazda vehicles.

from

$49.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Includes all parts needed to complete the repair
Includes all parts needed to complete the repair

from

$57.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Intake manifold gasket set contains manifold gasket(s) needed to replace an intake manifold.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$64.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$32.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$58.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$11.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$16.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Each gasket set is built to meet or exceed all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function