2007 Pontiac Grand Prix Engine Parts

Name: Harmonic Balancer Assembly
Brand: Dorman
SKU: 594-158
Price: 93.99 USD

Below you will find various in-demand Pontiac Engine Parts, components and accessories for your 2007 Grand Prix. Advance Auto Parts has popular Grand Prix parts like Valve Cover and Cylinder Heads, Engine Gaskets and Seals, Camshafts and more. You’ll also find aftermarket and OEM Engine Parts for other Grand Prix model years including 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2008 and more. Select a category of 2007 Pontiac Grand Prix Engine Parts below and start saving instantly.

Popular 2007 Pontiac Grand Prix Engine Parts Categories

Engine Valve Lifter Oil Manifolds

Engine Lifter Valley Cover Gasket Sets

Valve Covers

Engine Oil Pump O-Rings

Camshaft Gaskets

Engine Valve Lifters

Engine Oil Temperature Senders

Valve Cover Gaskets

Engine Timing Chain Kits

Engine Mount and Torque Struts

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Engine Oil Dip Stick Tube O-Rings

Crankshaft Position Sensors

Timing Covers

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Timing Cam Gears

Engine Mounts

Supercharger Pressure Sensors

Engine Lifter Valley Cover Gaskets

Oil Pans

Engine Oil Cooler Accessories

Engine Oil Dip Stick Tubes

Valve Cover Plugs

Cylinder Head Gaskets

Engine Mount Brackets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Engine Camshaft Bolts

Timing Chain Tensioners

Valley Pan Gaskets

O-Rings

Main Bearing Repair Sleeves

Engine Valve Stem Seals

Camshafts

Oversized Main Bearings

Camshaft Bearings

Push Rods

Standard Rod Bearing Sets

Water Connection Gaskets

Oil Pump Kits

Standard Piston Rings

Lower Gasket Sets

Timing Chains

Camshaft Seals

Balance Shaft Sprockets

Engine Valve Springs

Standard Individual Rod Bearings

Engine Valves

Engine Oil Filler Cap Seals

Standard Single Pistons

Timing Crank Gears

Engine Timing Damper Kits

Camshaft Thrust Plate and Bearings

Engine Oil Pressure Sensor Filters

Timing Dampers

Engine Valve Locks

Remanufactured Engines

Cylinder Heads

Engine Cylinder Deactivation Solenoids

Engine Assembly Lube

Engine Oil Strainer Gasket Sets

Engine Oil Pump Primers

Engine Camshaft Retainer Plates

Engine Oil Pump Pickup Tube Bracket

Valve Train Set Up Spring Set

Essential Engine Parts for 2007 Pontiac Grand Prixes

from

$93.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$43.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$32.49

Melling oil pump repair kits are provided to supply the parts needed to rebuild a specific individual oil pump. Melling kits include all the required parts needed for a quality oil pump rebuild. Although Melling recommends the installation of a new oil pump, Melling oil pump repair kits are the preferred choice when a rebuilder has the desire to reuse the original oil pump casting or front timing cover.

Product Features:

Includes components needed to rebuild a worn oil pump providing an alternative to purchasing a new oil pump
Components are manufactured from high quality materials for durable wear
Components are precision engineered for optimum fit and function
Designed for long-life and worry-free performance

from

$88.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Cast with FM425 AXP for strength and durability
Performance/dependability of OE pistons – high quality aluminum casting & machining provide reliability, durability & long life of part
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
Up-tilt ring grooves improve piston to ring sealing & providing great blow-by control

from

$30.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Meet or exceed OEM performance requirements. Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience.

Product Features:

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$85.99

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Reduces dramatically or eliminates bearing wear
Exacting tolerances
Meets or exceeds OEM specifications
Made with silicon to provide greater surface hardness

from

$2511.99

Remanufactured Engines are fully disassembled; heads, blocks, cranks & cams are machined & wear parts are replaced. Each engine is individually tested after assembly to assure compression, oil pressure and water jacket integrity.

Product Features:

Each engine we remanufacture is essentially reverse engineered – in part to discover original factory deficiencies. If possible, our seasoned R&D personnel & QC experts make improvements. Why shouldn’t our engine last longer than your first?
Engines come with installation gasket set & oil pump unless noted otherwise. If we have important installation information it will be included on tags or in the paperwork packaged with your engine.
Engines are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
Each engine is remanufactured with quality OE level components not “white” box generic parts that may or may not satisfy your needs and expectations. When you use the best you get the best results and satisfaction.

from

$2.99

from

$110.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$34.99

Edelbrock part #4860 S/B Chevy Chrome Timing Cover (with Welded Reinforcement Plate) This stamped steel timing covers for small-block Chevrolet has a reinforcement plate welded to the inside of the cover for added strength. This timing cover is ideal for

Product Features:

Stamped Steel Material
Comes W/ Front Crankshaft Seal Installed
W/ Welded Reinforcement Plate
Chrome Finish
Ideal For Preventing Camshaft Walk When Used W/ Thrust Button

from

$16.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Full Sets contain all the gaskets and seals necessary for a complete engine overhaul
Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$67.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$165.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$6.99

Install an ARP cam bolt kit and end your camshaft timing worries ARP quality delivers increased pre-load clamping force and assures positive timing gear register. Includes appropriate fasteners for your application. Increased material strength overcomes valve train harmonics and stress. Added features include oversized bolt head flange for cam button retention and reduced socket head size to facilitate easy installation and removal. Available in both High Performance and Pro Series kits.

Product Features:

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 3
180,000 PSI
.75″ Underhead Length

from

$32.99

Replacement Oil Pump Drive Nose / Gear for Cloyes High Performance LS Timing Chain Sets.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, Cloyes Timing Chain Sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems

from

$10.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to PONT 65-75;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1965-1975
Weight approx: 3 Lbs
PART GROUP: 2254, 2254

from

$51.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.
The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
Barometric Pressure Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper engine calibration at varying pressures

from

$0.99

Engine Oil Dipstick Tube O-Ring

from

$21.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$10.49

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Formulated for prelubrication cam lobes, lifters & engine bearings
Increases load carrying capacity
Holds fast to surfaces
Exacting tolerances
Meets or exceeds OEM specifications
4.0 oz. Squeeze Container

from

$6.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$52.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs. CAD designed and manufactured using premium materials to ensure optimal performance. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Refer to our online catalog for detailed application-specific information.

Product Features:

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation
CAD designed and manufactured using premium materials to ensure optimal performance
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$354.99

There are many important reasons to use ARP main stud kits, including the elimination of main cap walk and fretting, as well as protecting the threads in your engine block. All kits come complete with hardened parallel ground washers and high quality nuts. Some applications have provisions for mounting wind age trays and have specially designed standoff studs with serrated lock nuts to position the wind age tray and lock it securely in place. The studs are manufactured from 8740 chrome moly steel, heat treated in-house to 200,000 Pounds Per Square Inch tensile strength, and precision J-form threads rolled after heat treat to create a fastener that has threads 1000 Percent stronger than others.

Product Features:

Kit Come Complete With Hardened Parallel Ground Washers And High Quality Nuts
Manufactured From 8740 Chrome Moly Steel
Heat Treated To 200,000 Pounds Per Square Inch
Precision J-Form Threads Rolled After Heat Treat To Create A Fastener That Has Threads 1000 Percent Stronger Than Others
200,000 PSI
Sold As A Kit

from

$223.99

COMP Cams offers a complete line of valve stem seals, from the umbrella seals to the positive-stop Teflon seal. These seals are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The umbrella seal is normally used when a larger-than-stock diameter spring is used, in the case of a double spring, the positive-stop Teflon seal is used. The umbrella seals require no machining, but with the Teflon seal it is necessary to disassemble the heads and machine the top of the guide with a special .530 diameter cutter. Whenever you are planning an engine overhaul or a cam change, don’t forget the valve seals.

Product Features:

Work with .530″ guides and 11/32″ valve stem diameter
Valve stem oil seals keep unwanted oil from entering the combustion chamber
Several different types of valve seals are offered

from

$11.99

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components

Product Features:

Retro-fit performance
High-strength steel retainer (precisely limits plunger travel to perform at high rpm)
Eliminates frequent lash adjustments
Significant friction reduction substantially increases horsepower and fuel economy
Delivers quieter engine operation
Application-specific design for perfect fit and correct operation

from

$28.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$9.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

Upgrade your 2007 Pontiac Grand Prix with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2007 Pontiac Grand Prix, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Pontiac or enhancing its overall performance, Engine Parts are key to keeping your Grand Prix functioning at its best. At Advance Auto Parts, we offer a wide selection of 257 Engine Parts for the 2007 Pontiac Grand Prix, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2007 Pontiac Grand Prix at great prices. Our Engine Parts inventory for this model ranges from just $0.65 to $4,167.99, with an average price of $124.29. Our 257 Engine Parts in stock come from 25 trusted brands, so you’re sure to find the right part for your 2007 Pontiac Grand Prix without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Pontiac Grand Prix, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Dorman, and more. FELPRO Engine Parts start at just $6.49 and boast an impressive 4.6 stars average rating from customers. National and Dorman also bring quality to the table, with Engine Parts available starting at $7.99, and at an average 4.3 stars rating. With 2,058 customer reviews and counting, our 2007 Pontiac Grand Prix Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Pontiac Grand Prix is always ready to roll. We’re committed to providing you with everything you need to keep your Grand Prix in top shape, all in one place. Start shopping confidently below for your 2007 Pontiac Grand Prix!

Best-Selling Valve Cover and Cylinder Heads for 2007 Pontiac Grand Prixes

Enhance the driving experience in your Pontiac with 33 quality Valve Cover and Cylinder Head components, starting at $0.65.

show more show less

from

$289.99

The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.

Product Features:

Cylinder Deactivation Manifold
Cylinder Deactivation Manifold
The CD Manifold manages the cylinder deactivation function for optimized fuel economy and engine efficiency. This direct replacement part restores drivability and proper engine performance.
Constructed of aluminum for increased durability and a longer service life
No special tools required

from

$22.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$69.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Cylinder head gaskets are sold individually and may require new head bolts based on application.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Application specific design to ensure a perfect fit
Unsurpassed quality you can trust

from

$77.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$47.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$62.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
HANDLES EXTREME ENGINE CONDITIONS – Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$14.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$6.49

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

PermaTorque head gaskets meets or exceeds all original equipment specifications
Requires no retorquing of the head bolts
Unsurpassed quality you can trust
Unsurpassed quality you can trust

from

$24.99

Sealed Power® Vintage components provide coverage for applications over 35 years old, restoring classics with like new performance. Leading edge materials, ISO & QS certified manufacturing ensures performance and longevity for treasured engine rebuilds.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications
New OEM riveted pin retaining design

from

$22.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$2.99

from

$0.65

from

$55.99

ACDelco GM Original Equipment Engine Valve Lifters automatically help maintain a ‘zero’ valve lash condition to help prevent valve train noise and unnecessary valve train component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment valve lifters have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Adjusts the valves on your vehicle’s engine for proper performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$7.49

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$288.99

COMP Cams Hydraulic Roller Lifters are a performance upgrade for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. The roller wheel decreases friction and increases longevity when compared to flat tappet lifters. Hydraulic roller lifters can handle much more aggressive cam profiles than flat tappets unlocking performance potential.

Product Features:

.842″ diameter; 122g weight; 2.66″ seat height
Performance replacement for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks
Decrease friction and increase longevity when directly compared to flat tappet lifters
Accept much more aggressive cam profiles than flat tappet lifters will allow

from

$248.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$383.99

This rigorously engineered engine cylinder deactivation solenoid, a.k.a. CD manifold, directly replaces the original equipment on select vehicles. This design features multiple upgrades to help ensure performance and reliability.

Product Features:

Upgraded design – this cylinder deactivation manifold has enhanced features to match the fit, function and performance of the factory part on certain vehicles
Improved seals – increased sealing surface interface, redesigned rod sub-assembly, and superior quality O-rings and gasket
Reliable operation – internal bore step incorporates a radius edge to prevent valve sticking
Durable construction – solenoid rod hardened to improve wear resistance and maintain tighter tolerances

from

$267.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$187.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$64.99

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$72.99

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

Most Popular 2007 Pontiac Grand Prix Engine Gaskets and Seals

Customize your Pontiac with 22 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $217.99.

show more show less

from

$67.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$83.99

This direct replacement rear main seal cover kit matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this rear main seal cover kit matches the factory design, and includes a new gasket, installation hardware, and an updated seal design for superior leak prevention
Durable construction – the timing cover in this kit is made of die-cast aluminum for a leak-free fit and durability
Convenient solution – this kit includes a new gasket and installation hardware for a complete repair
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$27.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$62.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$67.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.99

Meets or exceeds all original equipment specifications
Application specific design for Unsurpassed quality you can trust
Validated for fit, form, and function
Quality that you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$73.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$20.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$6.99

Meets or exceeds all original equipment specifications
Application specific design
Manufactured for the sealing repair environment
Validated for fit, form, and function
Quality that you can trust

from

$37.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$26.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$17.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$37.99

RIGHT TYPE – Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS – Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE – Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID – Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE – Available for domestic and foreign nameplate vehicles

from

$62.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Includes all parts needed to complete the repair

from

$119.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function
Includes all parts needed to complete the repair

from

$5.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$217.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$7.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$46.99

High Quality original equipment Style Gasket with Molded Rubber over Aluminum Carrier

Product Features:

OEM Style Gasket – Molded Rubber over Aluminum Carrier
Replaces GM # 12558178
Fits GM LS1/LS6 Engines

from

$34.99

Includes two Valve Cover Gaskets / Seals. Molded Rubber O-ring Style.

Product Features:

OEM Style Molded O-Ring Style Gaskets
Replaces GM # 12560696

from

$3.99

Made In USA. Installing an oil pump screen can often cause damage to the protective gaskets and O Rings if the screen assembly is not properly installed. In the event that the original seals are damaged or accidently discarded Melling offers a replacement gasket set for oil pump screen installations covering the LS oil pumps. Each package conveniently contains both replacement O Rings needed to complete the oil pump screen installation. These gasket sets can be used for the M295, M295HV, M355, M365, 10295, 10296 and 10355 oil pumps.

Top Picks for 2007 Pontiac Grand Prix Camshafts

Upgrade Pontiac Grand Prixes with top-quality Camshafts parts, including 19 OEM and aftermarket selections for your 2007 model.

show more show less

from

$24.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$30.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$51.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our camshaft position sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application
O-rings and seals are included if required
Weather-tight connectors prevent leaks and corrosion for longer life
Extensive design validation testing and 100% end-of-line tested
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$44.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$47.99

Carquest crankshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest crankshaft position sensors are a cost-effective solution for your engine management repair. Carquest crankshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$26.49

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$11.99

ARP Quality Delivers Increased Pre Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Sold As A Kit
180,000 PSI
.984″ Underhead Length

from

$42.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$55.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
Use Dual Valve Spring part No. 26925-16 with this camshaft

from

$20.99

Replacement Captured Needle Thrust Bearing for LS Applications; Meets or exceeds OEM performance requirements; Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

Product Features:

Replacement Captured Needle Thrust Bearing for LS Applications
Meets or exceeds OEM performance requirements
Cloyes utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience.

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$65.99

The Camshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position and speed of the camshaft(s) to the ECM. The ECM uses this information to determine fuel and spark timing as well as VVT operation. A failed sensor can result in a check engine light, hard starting or failure to start, increased vehicle emissions and engine misfire. Camshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the camshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$41.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$29.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$24.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$12.99

Arp Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Quality Delivers Increased Pre-Load Clamping Force And Assures Positive Timing Gear Register
Increased Material Strength Overcomes Valve Train Harmonics And Stress
Oversized Bolt Head Flange For Cam Button Retention And Reduced Socket Head Size To Facilitate Easy Installation And Removal
Set of 4
180,000 PSI
.787″ Underhead Length

In-Demand Engine Mounts for 2007 Pontiac Grand Prixes

Select from 8 premium Engine Mounts parts for your 2007 Pontiac Grand Prix, with prices ranging from $16.99 to $173.99.

show more show less

from

$31.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 94-09; CHEV 95-05; OLDS 94-99; PONT 94-08;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2009
Weight approx: 1 Lbs
COMPLETE MOUNT

from

$16.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 94-09; CHEV 95-09; OLDS 94-04; PONT 94-09; SATURN 05-07;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1994-2009
Weight approx: 1 Lbs
INSERT ONLY

from

$37.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 08-09; CHEV 06-09; OLDS 99-02; PONT 05-08;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1999-2009
Weight approx: 3 Lbs
PART GROUP: 2990, 3093

from

$59.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 02-09; CHEV 00-11; PONT 01-09; SATURN 05-07;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2000-2011
Weight approx: 5 Lbs
HYDRAULIC

from

$59.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. The Torque Strut prevents engine rocking. Each part is engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 96-09; CHEV 98-05; OLDS 98-02; PONT 97-08;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1996-2009
Weight approx: 2 Lbs
STRUT/RADIATOR SUPPORT
PART GROUP: 3088, 3088

from

$81.99

This engine mount bracket is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$139.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BUIC 08-09; CHEV 06-09; OLDS 99-02; PONT 05-08;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1999-2009
Weight approx: 3 Lbs
HYDRAULIC
PART GROUP: 2990, 3093

from

$173.99

GM Genuine Parts Engine Mount are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

Most Sold 2007 Pontiac Grand Prix Engine Timing Parts

Explore our best-selling Pontiac parts for the 2007 Grand Prix among 55 OEM and aftermarket options starting from $17.49.

show more show less

from

$53.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$44.49

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$97.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-4205 Engine Timing Chain (1 EA), 9-5490 Engine Timing Chain Tensioner (1 EA), S827 Engine Timing Crankshaft Sprocket (1 EA).

Product Features:

Timing Chain Kits includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$93.99

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience. Utilizes the latest in design and technology to offer a complete chain kit solution. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. CAD designed and manufactured using premium materials. Refer to our online catalog for detailed application-specific information. SET INCLUDES: 9-5344 Engine Timing Damper (1 EA), C381A Engine Timing Chain (1 EA), S810T Engine Timing Camshaft Sprocket (1 EA), S811 Engine Timing Crankshaft Sprocket (1 EA).

Product Features:

Timing Chain Kits includes all components for a quick and efficient replacement
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information

from

$175.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, with 9-Keyway Crankshaft Sprocket, 3 Bolt, 1 Sensor Hub

from

$74.99

ACDelco GM Original Equipment Engine Timing Chains synchronize the rotation of the crankshaft and camshaft(s) in an internal combustion engine. They help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes, and are GM-recommended replacements for your vehicle’s original components. These original equipment timing chains have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Synchronizes the rotation of the crankshaft and the camshaft(s) to help ensure that the engine’s valves open and close at the proper time during each cylinder’s intake and exhaust strokes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$411.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover.
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life.
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$45.99

High Performance 3/8″ Pitch Single Roller Replacement TRUE Roller Chain. 0.250″ Roller Diameter. Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness. Pre-stressed to Increase Fatigue Life.

Product Features:

A timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing of the engines valve events for each cylinder
Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
From stock replacement to high performance, Cloyes has the most complete timing chain catalog
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes recommends the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information
Keep your engines valvetrain in perfect time with Cloyes, the world leader in timing drive systems

from

$97.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S894T Engine Timing Camshaft Sprocket (1 EA), S827 Engine Timing Crankshaft Sprocket (1 EA), 9-4205 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$55.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$26.99

A timing chain tensioner maintains appropriate tension in the timing chain. Depending on design, tensioners can use spring tension or hydraulic pressure to properly tension the chain
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Meet or exceed OEM performance requirements
Utilizes the latest in design and material technology, ensuring a quiet and maintenance-free experience

from

$234.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance, 3 Bolt, 1 Sensor Hub, Single Roller

from

$52.99

ACDelco GM Original Equipment Engine Timing Damper Kits remove unnecessary slack from the timing chain to help prevent chain rattle and excessive component wear, and are GM-recommended replacements for your vehicle’s original components. These original equipment engine timing damper kits contain components that will provide the same performance, durability, and service life you expect from General Motors.

Product Features:

Removes excessive slack from the timing chain to help prevent chain rattle and excessive component wear
Contains necessary parts to replace your vehicle’s engine timing damper
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$17.49

Advance Auto Parts is proud to carry this part with the best fitment and performance requirements for this application, from the highest quality timing component vendor.

Product Features:

The part is precision machined with high grade material for greater durability
Maintains excellent chain or belt tension
Meets or exceeds O.E.M. performance
Part is quality inspected and tested

from

$31.49

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$223.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, with 9-Keyway Crankshaft Sprocket, 1 Bolt, 4 Sensor Hub

from

$28.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$395.99

Billet Crankshaft Sprocket Has Nine Keyways for +/- 8 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 9-Keyway Crank, 1 Bolt/4 Sensor, .390″ Raised Cam

from

$389.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 9-Keyway Crank Sprocket, 1 Bolt, 4 Sensor Hub

from

$389.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “Z” Chain TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$389.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Both Billet Steel Sprockets are Heat Treated for Durability. TRUE Roller 0.250″ Roller Diameter “Z” Chain for Reduced Friction. “Z” Chain Approximately 33% Overall Increased Strength Over the Standard High Performance Chain. “Z” Chain Featuring a Press Fit Center Link design that Increases Load Distribution with Heat Treated and Processed Links to Maximize Ultimate Breaking Strength while Remaining Ductile for Toughness and Pre-stressed to Increase Fatigue Life. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Block Thrust Surface Friction. 3-Piece Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 3-Keyway Crank, 1 Bolt/4 Sensor, .390″ Raised Cam

from

$389.99

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.
High Performance Timing Set, Race Billet, w/ “Z” Chain, 3-Keyway Crank Sprocket, 1 Bolt, 4 Sensor Hub

from

$382.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “Z” Chain TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$372.99

HEX-A-JUST Allows for Infinite Valve Timing Adjustability of +/-6 Degrees to Tune for Maximum Engine Performance Output. One Piece Camshaft Sprocket Design Featuring a Billet Eccentric Camshaft Dowel Bushing. Both Billet Steel Sprockets are Heat Treated for Durability. Upgraded “Z” Chain TRUE Roller 0.250″ Roller Diameter Chain for Reduced Friction. Includes Captured Needle Camshaft Sprocket Thrust Bearing to Minimize Friction. Sets Hand-Matched to Qualify the Correct Center Distance and Minimize Runout.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

Top-Rated Engine Parts Brands For Your 2007 Pontiac Grand Prix

Shop for the best-rated brands offering Engine Parts and other products for your 2007 Pontiac Grand Prixes. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Dorman, and more. Engine Parts from these brands that fit a 2007 Grand Prix start at just $6.49 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2007 Pontiac Grand Prix Engine Parts

When it comes to maintaining or upgrading your 2007 Pontiac Grand Prix, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2007 Pontiac Grand Prix. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.49, with an average price of just $42.49. Plus, with over 157 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $52.99

(42)

TIMING COVER GASKET SET

“Excellent Gasket set fit everything perfect.”

from $67.99

(74)

Engine Oil Pan Gasket Set – PermaDry molded rubber

“This is a great gasket well worth the extra money.”

from $6.49

(41)

Multi-Purpose O-Ring

“Corrected the issue”

Popular National 2007 Pontiac Grand Prix Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 2007 Pontiac Grand Prix owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2007 Grand Prix, Advance Auto Parts carries a full inventory of 3 National Engine Parts. Plus you will be keeping your Pontiac in peak condition while saving money because prices on these National Engine Parts range from $20.99 to $29.99, plus, with more than 16 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $20.99

(2)

Multi-Purpose Seal

“Wonderful”

from $26.99

(7)

Engine Crankshaft Seal

“Worked outgreat for me. Was exact fit a d appeared to be equivalent quality of a OEM. Satisfied”

from $29.99

(7)

Engine Crankshaft Seal

“This picture may be deceiving! This seal looks lovely led exact match.”

FAQs for 2007 Pontiac Grand Prix Engine Parts

Which Engine Parts are best-sellers for 2007 Pontiac Grand Prixes?

Out of 257 Engine Parts that fit 2007 Pontiac Grand Prixes, the following parts are the top sellers:

Engine Valve Lifter (5681081) – $14.49
Engine Oil Pan Gasket Set – PermaDry molded rubber (15780339) – $67.99
Engine Valve Cover Gasket Set (10942807) – $37.99

What’s the price range for 2007 Pontiac Grand Prix Engine Parts?

Engine Part prices for the 2007 Pontiac Grand Prix start at $0.65 and go up to $4,167.99 for the most premium parts.

What’s the average price of a Engine Part for a 2007 Pontiac Grand Prix?

The average price for Engine Parts for the 2007 Pontiac Grand Prix is $124.29. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Pontiac Grand Prix model years?

Yes, we currently carry Engine Parts for 45 model years of Pontiac Grand Prixes between 1962 and 2008. Engine Parts are bought most frequently for the following model years: 2008, 2006, 2005, 2004, 2003, 2002, 2001, 2000, and 1999.

What are the cheapest Engine Parts for my 2007 Pontiac Grand Prix?

The cheapest 2007 Pontiac Grand Prix Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (15680110) – $0.65
Engine Oil Dipstick Tube O-Ring (50251306) – $0.99
Engine Push Rod (19680194) – $2.99
Multi-Purpose O-Ring (15780472) – $3.29
Fuel Injector O-ring Set (15780910) – $3.99

What are the top-rated Engine Parts that fit the 2007 Pontiac Grand Prix?

Out of 2,058 reviews by customers, our 2007 Pontiac Grand Prix Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2007 Pontiac Grand Prix and their top-rated products:

Engine Gaskets and Seals
- Main Seal Cover Kit (10286660) – $83.99
- Engine Oil Pan Gasket Set – PermaDry molded rubber (15780339) – $67.99
- Engine Coolant Thermostat Housing Gasket (11138675) – $6.99

What types of Engine Parts do you sell for my 2007 Pontiac Grand Prix?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2007 Pontiac Grand Prix:

Can I get help with 2007 Pontiac Grand Prix Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Pontiac Engine Parts and more.

What is your return policy for Pontiac Grand Prix Engine Parts?

Advance Auto Parts keeps returns simple. For new Pontiac Grand Prix Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2007 Pontiac Grand Prix Engine Parts

Dorman – Harmonic Balancer Assembly (Part No.594-158)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber, Oil Pan SnapUps Included (Part No.OS 34500 R)

Melling – Stock Replacement Type Oil Pump Repair Kit (Part No.K-20I)

Sealed Power – Engine Piston Set (Part No.H1132CPA .25MM)

Cloyes Gear – Engine Timing Damper (Part No.9-5417)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.7288MA 10)

Spartan – Engine Long Block; Buick 231 97-07 SC FWD Eng (Part No.DB62)

Sealed Power – Engine Push Rod (Part No.RP-3262)

Dorman – Engine Oil Pan: Direct Fit, Steel, Sump (Part No.264-124)

Edelbrock – Timing Cover SBC Stamped Steel W/Welded Star & Logo Chrome (Part No.4860)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40613)

Felpro – Engine Conversion Gasket Set (Part No.CS 8518-1)

Cloyes Performance – High Performance Timing Set (Part No.9-3645X3-5)

ARP Auto Racing – Small Block/ Big Block Chevy, 5/16" – 18 Thread Size, .75" Head L, 1/2" Socket (Part No.134-1001)

Cloyes Performance – Engine Oil Pump Drive Gear (Part No.9-228)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2254)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0205)

Felpro – Engine Oil Dipstick Tube O-Ring (Part No.73889)

Cloyes Gear – Engine Timing Chain (Part No.C350)

Sealed Power – Engine Assembly Lubricant (Part No.55-400)

Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10066)

Cloyes Gear – Engine Balance Shaft Sprocket (Part No.2558)

ARP Auto Racing – For Use With Chevy Gen Iii/Ls Series Small Block/ Gmpp Lsx Block, Hex Head (Part No.234-5608)

Competition Cams – VALVE SEALS, 11/32" TEFLON 1 ST (Part No.503-16)

Sealed Power – Engine Valve Lifter (Part No.HT-817R)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S811)

National – Multi-Purpose Seal (Part No.9845)

Felpro – Fuel Injector O-ring Set (Part No.ES 71192)

Dorman – Cylinder Deactivation Manifold (Part No.917-162)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72833)

MAHLE Original – Engine Cylinder Head Gasket (Part No.54442)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 74033)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9918 PT)

Dorman – Valve Covers: with Gasket, Direct Replacement, Plastic (Part No.264-967)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72220)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26190 PT)

Sealed Power – Engine Valve Lifter (Part No.HT-2148)

Sealed Power – Engine Push Rod (Part No.RP-3349)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.9917 PT)

Sealed Power – Engine Valve Lifter (Part No.HT-2148A)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 72233)

Sealed Power – Engine Push Rod (Part No.RP-3340)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-291)

ACDelco – Engine Hydraulic Valve Adjuster/Valve Lifter (Part No.HL124)

Sealed Power – Engine Valve Spring (Part No.VS-1628)

Competition Cams – LIFTERS, LS SERIES OE STYLE HYD RLR 1 ST (Part No.850-16)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9917 PT-4)

Dorman – Cylinder Deactivation Manifold (Part No.917-162XD)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26190 PT-3)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 9089 PT-4)

Dorman – Valve Covers: with Gasket, Direct Replacement, Plastic (Part No.264-964)

Dorman – Valve Covers: with Gasket, Direct Replacement, Plastic (Part No.264-966)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30693 R)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45993)

Dorman – Main Seal Cover Kit (Part No.635-518)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50080 R)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 46077)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30767 R)

Felpro – Engine Coolant Crossover Pipe Mounting Set (Part No.ES 73027)

Felpro – VALVE COVER GASKET SET (Part No.VS 50465 R)

National – Multi-Purpose Seal (Part No.320691)

Felpro – Engine Coolant Thermostat Housing Gasket (Part No.36021)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50504 R-1)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50504 R)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50320 R)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71039)

Felpro – Engine Lifter Valley Cover Gasket (Part No.MS 96857)

Felpro – Engine Lifter Valley Cover Gasket Set (Part No.MS 96871)

Felpro – Engine Oil Filler Cap Seal (Part No.73193)

Felpro – Engine Conversion Gasket Set (Part No.CS 9284)

MAHLE Original – Engine Coolant Water Bypass Gasket (Part No.C31274)

Mr. Gasket – Gaskets (Part No.61020G)

Mr. Gasket – Gaskets (Part No.61040G)

Melling – Engine Oil Strainer Gasket Set (Part No.M29517)

MAHLE Original – Engine Camshaft Gasket (Part No.B31822)

Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam (Part No.54-408-11)

MAHLE Original – Engine Camshaft Gasket (Part No.B32270)

Carquest Premium – Camshaft Position Sensor (Part No.CSC1131)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT2782)