2007 Isuzu HTR Belts and Hoses

Essential Belts and Hoses for 2007 Isuzu HTRs

Dayco – Double Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (Part No.22463)

Double Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality

from

$18.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  •  Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22461)

Green Stripe« Truck & Bus Series V-Belt

from

$36.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More

Dayco – Poly Rib Belt Serpentine Belt; 78.75 Long, 7 Rib Count (Part No.5070788)

Poly Rib Belt Serpentine Belt; 78.75 Long, 7 Rib Count

from

$62.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – V-Ribbed Serpentine Belt: 79.183" Long, 7 Rib Count, Exact Fit (Part No.K070786)

V-Ribbed Serpentine Belt: 79.183" Long, 7 Rib Count, Exact Fit

from

$89.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K070786HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$105.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Premium Modular Coolant Hose (Part No.22768)

Premium Modular Coolant Hose

from

$310.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

Upgrade your 2007 Isuzu HTR with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2007 Isuzu HTR, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Isuzu or enhancing its overall performance, Belts and Hoses are key to keeping your HTR functioning at its best. At Advance Auto Parts, we offer a wide selection of 6 Belts and Hoses for the 2007 Isuzu HTR, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Engine Cooling Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2007 Isuzu HTR at great prices. Our Belts and Hoses inventory for this model ranges from just $18.29 to $310.99, with an average price of $104.21. Our 6 Belts and Hoses in stock come from 2 trusted brands, so you’re sure to find the right part for your 2007 Isuzu HTR without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2007 Isuzu HTR is always ready to roll. We’re committed to providing you with everything you need to keep your HTR in top shape, all in one place. Start shopping confidently below for your 2007 Isuzu HTR!

Best-Selling Serpentine and V Belts for 2007 Isuzu HTRs

Enhance the driving experience in your Isuzu with 5 quality Serpentine and V Belt components, starting at $18.29.

Dayco – Poly Rib Belt Serpentine Belt; 78.75 Long, 7 Rib Count (Part No.5070788)

Poly Rib Belt Serpentine Belt; 78.75 Long, 7 Rib Count

from

$62.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K070786HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$105.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Green Stripe« Truck & Bus Series V-Belt (Part No.TR22461)

Green Stripe« Truck & Bus Series V-Belt

from

$36.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.

Product Features:
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • High modulus, high strength tensile cord
  • Oil and heat-resistant construction throughout
  • Meets SAE J636b and SAE J637 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • NOTE: Some sizes available as Gates PowerBand joined V-belts
See More

Gates – V-Ribbed Serpentine Belt: 79.183" Long, 7 Rib Count, Exact Fit (Part No.K070786)

V-Ribbed Serpentine Belt: 79.183" Long, 7 Rib Count, Exact Fit

from

$89.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Double Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (Part No.22463)

Double Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality

from

$18.29
Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:
  •  Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
  •  Provides greater durability and flexibility – 35% stronger than all previous versions
  •  Features specially treated cords for added strength, stability and reliability
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Most Popular 2007 Isuzu HTR Engine Cooling Hoses

Customize your Isuzu with 1 Engine Cooling Hoses products like Lower Radiator Hoses, all priced under $310.99.

Gates – Premium Modular Coolant Hose (Part No.22768)

Premium Modular Coolant Hose

from

$310.99
Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
  • EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More

FAQs for 2007 Isuzu HTR Belts and Hoses

Which Belts and Hoses are best-sellers for 2007 Isuzu HTRs?

Out of 6 Belts and Hoses that fit 2007 Isuzu HTRs, the following parts are the top sellers:

What’s the price range for 2007 Isuzu HTR Belts and Hoses?

Belts and Hose prices for the 2007 Isuzu HTR start at $18.29 and go up to $310.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2007 Isuzu HTR?

The average price for Belts and Hoses for the 2007 Isuzu HTR is $104.21. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Isuzu HTR model years?

Yes, we currently carry Belts and Hoses for 2 model years of Isuzu HTRs between 2005 and 2006. Belts and Hoses are bought most frequently for the following model years: 2006 and 2005.

What are the cheapest Belts and Hoses for my 2007 Isuzu HTR?

The cheapest 2007 Isuzu HTR Belts and Hoses we carry in stock are:

What types of Belts and Hoses do you sell for my 2007 Isuzu HTR?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2007 Isuzu HTR:

Can I get help with 2007 Isuzu HTR Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Isuzu Belts and Hoses and more.

What is your return policy for Isuzu HTR Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Isuzu HTR Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.