2007 International CXT Fuel Injectors

The FICM on certain Ford and Navistar vehicles is mounted in a location where it’s exposed to constant heat and vibration, often causing the internal inverter board to stop working properly. When that happens, the only replacement available from the OEM is a complete module assembly, with a housing, controller board and power board, that needs to re-initialized to the vehicle using proprietary programming tools. This Dorman OE FIX fuel injector control module repair directly replaces only the inverter board to reduce the overall repair cost as well as avoid having to program the module, allowing for a DIY repair. This improved component also features an additional securing compound that helps control vibrations and make it less likely to fail the same way again.

Product Features:

• Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
• Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
• No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
• Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

• Original equipment fit, form and function
• Manufactured to precise OE performance specifications
• O-ring seals included and installed on new IPR valve

This fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles
• Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
• Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

• Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
• Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
• Durable construction – designed and manufactured to strict specifications for reliable performance
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Complete injector seal kit includes all seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

• Kit includes top high-pressure oil inlet seal and metal C clip, two injector body O-rings, copper combustion seal and two electrical plug seals
• Premium OE quality materials
• Services one injector

The injector sleeve provides sealing and cooling between the diesel fuel injector and cylinder head. Improper sealing can result in combustion gas and coolant leaks into the fuel system, which can result in engine misfire and injector failure. Replacing the sleeve at time of injector service or replacement ensures proper sealing, improving injector longevity.

Product Features:

• Original equipment fit, form and function

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• State-of-the-art designs that meet or exceed OE specifications
• Top-of-the-line quality and performance
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

Product Features:

• Each unit is 100% tested to OE specifications
• Includes all new premium quality o-rings and seals
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

Product Features:

• Each unit is 100% tested to OE specifications
• Includes all new premium quality o-rings and seals
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

Delphi knows OE technology and how to service diesel systems. For more than 60 years, we have partnered with 25 OEM’s to bring our OE diesel powertrain knowledge and expertise to the aftermarket. Delphi diesel systems operate at high performance to meet today’s tough emissions standards and are built to OE specifications for the fit, form, and function technicians expect. Trust Delphi for an unrivalled, cost-effective diesel program to help build your business.

Product Features:

• 100% O Ring replacement
• All Delphi injectors are tested utilizing OE methodologies
• Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
• No internal seal rings equals minimized leakage
• Recessed fuel exit minimizing possible plugging
• Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
• Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

Product Features:

• Each unit is 100% tested to OE specifications
• Includes all new premium quality o-rings and seals
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

Carquest premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is tested on a sophisticated flow bench under multiple operating parameters.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
• Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
• Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
• New spool valves are designed with updated features to reduce injector stiction
• Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
• Includes all new premium quality o-rings and seals
• Includes copper combustion seal
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

CARQUEST premium remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes 100% replacement of the solenoids which eliminates wire insulation cracking and coil failure in the field
• Includes 100% replacement of connector which ensures proper connection to vehicle wiring harness and proper fit and sealing through valve cover
• Spool valves and housing are 100% leak and flow tested to meet or exceed OE specifications
• New spool valves are designed with updated features to reduce injector stiction
• Precision ground nozzles are 100% flow tested to ensure accurate and precise fuel delivery
• Includes all new premium quality O-rings and seals
• Includes copper combustion gasket
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

Product Features:

• Each unit is 100% tested to OE specifications
• Includes all new premium quality o-rings and seals
• Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation