2007 Dodge Ram 1500 Suspension Parts

Essential 2007 Dodge Ram 1500 Suspension Parts

Rare Parts – Spring Seat (Part No.RP53039)

Spring Seat

from

$44.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces road noise
  • Reduces vibration
  • UV resistant
See More

Suncore – Quick Strut Kit (Part No.2-55S11610-001)

Quick Strut Kit

from

$239.99
Quick Strut Kit

Timbren SES – Rubber Spring, Frame Mount, 4,000 Lb Weight Capacity Per Set, Aeon Hollow Rubber (Part No.DF15004B)

Rubber Spring, Frame Mount, 4,000 Lb Weight Capacity Per Set, Aeon Hollow Rubber

from

$306.99
Timbren suspension enhancement system – The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:
  • Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
  • Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
  • Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
  • Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
  • Economical And Trouble Free
  • Simple And Easy To Install
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1245)

Multi Purpose Relay

from

$10.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

MOOG – Coil Spring Set (Part No.81188)

Coil Spring Set

from

$173.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA837)

Max-Air Air Shock Absorber

from

$114.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Dorman – Suspension Control Arm (Part No.520-364)

Suspension Control Arm

from

$97.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Energy Suspension – LeafSpBumper (Part No.5.9104G)

LeafSpBumper

from

$118.99
LeafSpBumper

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Skyjacker – Heavy Duty Add-A-Leaf Rear, Lift Height 1-1.5 in., with Tie Bolts, Pair (Part No.R372)

Heavy Duty Add-A-Leaf Rear, Lift Height 1-1.5 in., with Tie Bolts, Pair

from

$214.99
Softride(R) is the best way of describing the ride quality of our long Add A Leafs. The Softride(R) long Add A Leafs will bring new life and lift to your fatigued stock springs. And you can rest easy knowing that the Skyjacker(R) Softride(R) technology is at work in each pair. Also available are the Heavy Duty Add A Leafs. These units are shorter and are designed for extra payload capacity. Tie bolts are included in each pair of Skyjacker(R) Add A Leafs. Also available are ‘fitted leafs’. Fitted leafs are designed as an option exclusively for Skyjacker(R) Softride(R) lifted leaf springs. These are used when the additional weight of aftermarket accessories are installed such as a heavy winch bumper, an engine conversion, a swing away tire carrier, all your extra gear, etc.

Product Features:
  • Softride(R) Long Add A Leafs Will Bring New Life And Lift To Your Fatigued Stock Springs And You Can Rest Easy Knowing That The Skyjacker(R) Softride(R) Technology Is At Work In Each Pair
  • Add A Leafs Available Are The Heavy Duty, Units Are Shorter And Are Designed For Extra Payload Capacity
  • Tie Bolts Are Included In Each Pair Of Skyjacker(R) Add A Leafs
  • Add A Leafs Also Available Are ‘Fitted Leafs’. Fitted Leafs Are Designed As An Option Exclusively For Skyjacker(R) Softride(R) Lifted Leaf Springs
  • Fitted Leaf Springs Are Used When The Additional Weight Of Aftermarket Accessories Are Installed Such As Heavy Winch Bumper, An Engine Conversion, A Swing Away Tire Carrier, All Your Extra Gear, Etc.
  • Limited Lifetime Warranty
See More

Daystar – 1.5" Lift, Coil Spring Spacer, With 2 Coil Spring Spacers (Part No.KC09103BK)

1.5" Lift, Coil Spring Spacer, With 2 Coil Spring Spacers

from

$51.99
Daystar Comfort Ride Suspension systems are truly Driven by Design. Comfort Ride kits are specially designed to work with stock suspension components to keep costs down and quality high. High-density Progressive Polyurethane strut and spring spacers act as isolators to combine moderate amounts of lift without losing the comfortable ride you have come to expect. In torsion bar applications, re-indexed torsion keys allow you to dial-in the desired amount of lift in order to plus-size tire and wheel packages. These front lifts are often combined with Daystar Greaseable Super Shackles, add-a-leafs, or blocks and u-bolts to provide complete front and rear kits. Daystar offers a the most complete line of kits for most of the popular vehicles, including virtually all late-model domestic and import applications Almost all of the lift and leveling kits used on strut applications feature an easy-install design, no disassembly of the strut is required Comfort Ride Kits are the perfect start to achieving that custom look without compromising performance, reliability, or affordability.

Product Features:
  • No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
  • Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
  • Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
  • Top Mount Easy Install Design
See More

KYB – High Pressure Monotube Gas Shock (Part No.554375)

High Pressure Monotube Gas Shock

from

$109.99
The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:
  • Adds Up To 25% More Damping Performance Over Original Equipment Shocks
  • Components And Valving Designed Specifically For Dodge Rams
  • Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
  • High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
  • Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
  • The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
See More

Rancho – Rancho Shock (Part No.RS55367)

Rancho Shock

from

$94.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
  • MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
  • STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
  • HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
  • MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
See More

Belltech – Lowers 1 Inch, Rubber Bushing, Set Of 2 (Part No.6700)

Lowers 1 Inch, Rubber Bushing, Set Of 2

from

$92.99
By engineering bracketry or replacement components Belltech Shackles and Hangers to reposition the front and or rear leaf Spring Mounting points Spring eyes you can simply and effectively lower your leaf Spring equipped sport truck or SUV without changing the factory Leaf Spring. This allows you to retain OEM Ride Quality and possibly more importantly factory load capacity. At Belltech, we offer both Belltech Shackles and Hangers as individual components as well as complete kits depending on your Lowering requirements. Belltech Shackles and Hanger kits are designed to lower the rear of your Leaf Spring equipped sport truck or SUV by up to 5 Inch depending on the application

Product Features:
  • To Reposition The Front And/Or Rear Leaf Spring Mounting Points Spring Eyes You Can Simply And Effectively Lower Your Leaf Spring Equipped Sport Truck Or SUV Without Changing The Factory Leaf Spring
  • This Allows You To Retain OEM Ride Quality And Possibly More Importantly Factory Load Capacity
  • Belltech Shackles And Hanger Kits Are Designed To Lower The Rear Of Your Leaf Spring Equipped Sport Truck Or SUV By Up To 5 Inch Depending On The Application
  • Direct Bolt-In, No Additional Modifications
  • Comes With Installation Instructions
See More

Energy Suspension – Leaf Spring Bushing Set (Part No.5.2111R)

Leaf Spring Bushing Set

from

$79.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Adds Dramatic Amount of Performance/Durability
  • Helps Vehicle Be in Control
  • Allows the Suspension to Function Properly
See More

Firestone Ride-Rite – Double Bellows, 8.3"H Extended, 2.8"H Compressed, 6.6"Dia, 1/4" NPT Port, Single (Part No.6781)

Double Bellows, 8.3"H Extended, 2.8"H Compressed, 6.6"Dia, 1/4" NPT Port, Single

from

$203.99
Firestone heavy duty Ride Rite air helper springs are the workhorse of our air helper spring line. The double convoluted air springs offer maximum load support as well as years of worry free service. Ride Rite air helper springs can be installed on most light trucks, motor homes, RVs, SUVs and vans. Ride Rite air helper springs are installed between the frame of the vehicle and the suspension, providing load support through the use of air pressure. Firestone is committed to providing the customer with premium air helper spring kits. Ride Rite air helper springs have become synonymous with quality, durability, and customer support. Each application is specifically designed to maximize the safe load carrying capacity, stability, and ride quality of the vehicle. Ride Rite air helper springs utilize a pair of convoluted air springs which can be adjusted for changing loads. These air springs are capable of 3200 to 5000 Pounds of load leveling capacity. Ride Rite air helper springs enhance the ride by reducing inter leaf friction. Please remember that air springs do not increase the Load Carrying capacity of your vehicle. Ride Rite kits are application specific and are designed for hassle free fitment to the OEM suspension.

Product Features:
  • Keep The Vehicle Level Improves Steering Control And Braking Effectiveness, Levels Headlight Beams And Reduces Tire Wear
  • Level Off Center Loads, Individual Inflation Valves Allow For Adjustment Side To Side
  • Reduce Suspension Fatigue Keeps Leaf Springs From Permanent Sagging Under Repeated Or Constant Load
  • Reduce Bottoming Out Protective Air Cushion Softens Contact Between The Axle And Frame
  • Increase Vehicle Stability, Absorbs Road Shock, Providing Ideal Ride Conditions For Passengers And Load
  • Limited Lifetime Warranty
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

A/C Compressor Relay Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Energy Suspension – Control Arm Bump Stop Set (Part No.2.9101R)

Control Arm Bump Stop Set

from

$38.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Control Arm
See More

TRW – Control Arm Bushing Kit (Part No.L2040452428TRW)

Control Arm Bushing Kit

from

$45.00
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing Kit is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce vibration and absorb noise.
  • Kit includes bushings and hardware – (SEE Note)
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
See More

MOOG – Suspension Strut Mount (Part No.K160196)

Suspension Strut Mount

from

$55.99
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.

Product Features:
  • High polish chrome steel bearing races
  • Replacement helps restore vehicle handling
  • Superior rubber to steel bonding for durability
  • Engineered to meet or exceed OE requirements
  • Provides like-new steering ease of installation and longer life
  • Incorporates proven design and engineering features
See More

Energy Suspension – Coil Spring Isolator Set (Part No.5.6111G)

Coil Spring Isolator Set

from

$40.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Lasts from 3 to 10 Times Longer
  • Assemble to Chassis Same Way as OEM
  • Maintains Factory Ride Characteristics
  • Simple Way to Increase Vehicle Height
See More

Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Gauge/Air Line (Part No.2158)

Controls Two Air Springs Simultaneously, With Compressor/Gauge/Air Line

from

$551.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Single Point Fill (Both Air Springs Fill To The Same Pressure)
  • Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-815013)

Complete Strut Assembly: Includes Strut, Coil Spring and Mount

from

$177.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:
  • Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat
  • Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
  • Springs are built with U.S. grade steel and designed to match factory ride height and performance
  • OE quality strut mount, bearing plate and brackets
  • Complete strut assembly is extensively tested for functionality and durability
  • Built with a micro-smooth, chrome-plated piston rod
See More

Valvoline – DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)

DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart

from

$14.49
Valvoline DEXRON®-VI ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors’ DEXRON®-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON®-II and/or DEXRON®-III are recommended. Recommended for use in the following applications: DEXRON®-VI, DEXRON®-III, DEXRON®-II, and Allison C-4.

Product Features:
  • Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Dorman – Rear Leaf Spring (Part No.929-140)

Rear Leaf Spring

from

$319.99
Properly functioning leaf springs hold the weight and payload of a vehicle or trailer and are essential to suspension performance and passenger comfort. Check the product attributes to select the right leaf spring for your application.

Product Features:
  • Direct replacement – these leaf springs are designed to match the fit and function of the original leaf springs on specific vehicles or trailers
  • Ideal solution – seamlessly replaces leaf springs damaged by overloading, collision, cracking or corrosion, or are due for replacement
  • Durable construction – made from quality materials to strict specifications to ensure reliable performance and long service life
  • Trustworthy quality – engineered, manufactured and supported by the premier aftermarket leaf spring provider in the USA
See More

Monroe – Load Adjusting Shock Absorber (Part No.58615)

Load Adjusting Shock Absorber

from

$208.99
Ideal for light trucks that that tow or carry varying loads, Monroe load adjusting shocks include a heavy gauge calibrated spring that adjusts to road and weight conditions to provide extra control when operating conditions get more demanding.

Product Features:
  • REDUCES SAG UNDER LOAD — Ideal for occasionally hauling or towing varying loads, heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission, see owner’s manual)
  • EXCEPTIONAL HANDLING — Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces
  • LONGER SERVICE LIFE — Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For Improved Ride & Handling, Helps Maintain Tire To Road Contact By Reducing Aeration – On Most Applications
  • 5/8 nitrocarburized rod for long service life.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

KYB – Jounce Bumper and Bellows (Part No.SB132)

Jounce Bumper and Bellows

from

$24.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

2007 Dodge Ram 1500 Suspension Parts

You count on your 2007 Dodge Ram 1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 135 Suspension Parts ranging in price from $6.29 to $1,217.99, you’re sure to find everything you need for your 2007 Dodge Ram 1500.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 18 different brands like Monroe, Rancho, and Moog. 2007 Dodge Ram 1500 Suspension Parts start as low as $6.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4,580 extensive product reviews on 2007 Dodge Ram 1500 Suspension Parts. Some of the top-rated Suspension Parts products we carry are RS5000 Shock Absorber with 4.1 stars and RS5000 Shock Absorber with 3.9 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2007 Dodge Ram 1500 below to get started!

Top-Rated Suspension Parts Brands For Your 2007 Dodge Ram 1500

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Dodge Ram 1500 running right for years to come. In our inventory you’ll find brands like Monroe, Rancho, Moog, and even more.

Popular MOOG Suspension Parts

You’ll find popular MOOG brand products across Control Arms. All are waiting to get your 2007 Dodge Ram 1500 back on the road. Some of the top-rated MOOG products in these categories are:
Control Arm Bushing
from $48.99
(5)
Control Arm Bushing
Lower Control Arm Bushings
Control Arm
from $112.99
(1)
Control Arm
Lower Control Arms
Control Arm
from $99.99
(3)
Control Arm
Lower Control Arms

FAQs for 2007 Dodge Ram 1500 Suspension Parts

What are the most purchased Suspension Parts for the 2007 Dodge Ram 1500?

Out of 135 Suspension Parts for the 2007 Dodge Ram 1500, the most popular in our inventory are:
RS5000X Shock Absorber
from $80.99
This product is not rated
RS5000X Shock Absorber
Rear Shock and Struts
RS5000X Shock Absorber
from $82.99
(5)
RS5000X Shock Absorber
Rear Shock and Struts
Gas-Magnum Shock Absorber
from $104.99
(15)
Gas-Magnum Shock Absorber
Rear Shock and Struts

What are the top-rated 2007 Dodge Ram 1500 Suspension Parts?

Top-rated Suspension Parts for your 2007 Dodge Ram 1500 based on customer reviews/ratings are:
RS5000 Shock Absorber
from $67.99
(36)
RS5000 Shock Absorber
“Best experience buying auto parts that I’ve ever found. Lowest price in town, I didn’t have to wait in line, and the helpful staff even helped me car”
RS5000 Shock Absorber
from $66.99
(29)
RS5000 Shock Absorber
“Great product”
Load Adjusting Shock Absorber
from $184.99
(15)
Load Adjusting Shock Absorber
“truck would sag with reg shocks these are grt”