2007 Dodge Ram 1500 Performance Exhaust Products

The MagnaFlow 2006-2007 Dodge Ram 1500 Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.7L 2006-2007 Dodge Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Edge tips, this Dodge Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Ram 1500’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16701 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16701 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

The MagnaFlow 2006-2007 Dodge Ram 1500 Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.7L 2006-2007 Dodge Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Single Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Dodge Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Ram 1500’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16699 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16699 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques
• Dyno-proven performance

Designed primarily for today’s heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

Product Features:

• Large internal flow tubes improve exhaust flow and reduce backpressure
• Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
• Dyno proven to flow up to 700 SCFM
• Dyno proven to flow up to 700 SCFM

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.

Product Features:

• Stainless steel construction for lifelong protection
• 100% welded design for maximum durability
• Straight through design ensures unrestricted exhaust flow and reduces back pressure
• CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
• Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.

Product Features:

• Stainless steel construction for lifelong protection
• 100% welded design for maximum durability
• Straight through design ensures unrestricted exhaust flow and reduces back pressure
• CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
• Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

• Durable fully welded 409 stainless steel
• Deep aggressive exhaust note
• Noticeable interior resonance
• Excellent performance on high horsepower vehicles
• No internal packing to blowout

Shorty Smog Headers

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

• Manufactured from high-temperature steel core/graphite faced exhaust material
• Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
• Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
• Conforms to and seals minor surface irregularities
• Can be trimmed if necessary for modified port applications
• For OE replacement, high performance street, drag race and oval track use
• Anti-Stick Properties
• Easy Removal For Disassembly