2007 Dodge Ram 1500 Exhaust System Kits

HEMI 5.7L engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler, Dodge, Jeep and Ram vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

HEMI 5.7L engines often suffer from exhaust hardware failure due to rust, corrosion, and fatigue from thermal cycling. This kit offers a convenient way to service the manifold without spending time chasing the replacement components needed for a complete repair. The kit fits both sides of the engine and includes two exhaust manifold gaskets and two sets of mounting hardware for the exhaust manifold, catalytic converter flange, and exhaust pipe that match the function of those original components. Engineered to fit specified Chrysler and Dodge vehicles equipped with 5.7L HEMI V8 engines, this all-in-one solution is designed to preserve and restore the proper function of the original equipment left-side exhaust manifold.

Flowmaster introduces our Flow FX Extreme stainless steel cat-back exhaust system for the 2006-2008 Dodge RAM 1500 trucks with the 5.7-liter engine. This system uses a Flow FX series muffler for an aggressive to moderate sound level and increased performance. 3.00-inch mandrel bent 409 stainless steel tubing allows for maximum exhaust flow and durability. The system has a turndown style, dump exit right after the muffler to eliminate the over-axle tailpipe. This elimination of the tailpipe helps improve ground clearance and departure angle when you are driving in more extreme off-road situations. On the dyno this system showed max gains of 8 hp and 11 lb-ft of torque at the rear wheels. All of the necessary hardware is included, and factory-mounting locations are used for an easy installation. Backed by Flowmaster’s Limited Warranty.

“This Flowmaster Flow FX cat-back exhaust system for the 2009-2024 Dodge RAM 1500 trucks (19-24 1500 Classic only) with the 4.7 or 5.7-liter engine is manufactured using durable 409 stainless steel throughout and features 3.00 to dual 2.50-inch mandrel bent pipes for better exhaust gas flow. A Flow FX “”straight-through”” muffler is used for an aggressive to moderate sound level and maximum performance. Maximum increases on the dyno revealed +16 hp and +22 lb-ft at the rear wheels. This system exits out the same side, in front of the rear wheel on the passenger with dual 4.00-inch black ceramic tips for added style and a custom look. The system uses all the existing factory hanger locations and includes installation instructions and all necessary hardware for an easy installation that you can do at home. Backed by Flowmaster’s Limited Warranty.”

The MagnaFlow Dodge Ram 1500 Street Series Cat-Back Performance Exhaust System brings out the personality of your 8.3L Dodge Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Dodge Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Ram 1500’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15832 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15832 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Street Series Cat-Back Performance Exhaust System 16868 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Same Side Before Passenger Rear Tire exit with 3.5in. Polished Welded-On Single Wall Angle Cut Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Very Aggressive exterior and Aggressive interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16868 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16868 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combination of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

This Flowmaster American Thunder cat-back exhaust system for the 2006-2008 Dodge Ram 1500 trucks with the 4.7L engine is perfect for the person looking for a deep aggressive exterior sound with a moderate interior tone, and with all of the performance benefits that you would expect from Flowmaster. This bolt-on DOR/DOS (Dual Out Rear or Dual Out Side) emissions-legal exhaust system features 16-gauge mandrel-bent stainless steel tubing flowing into a specially designed Super 50 Series performance muffler with dual 2.50-inch aluminized steel tailpipes. The tailpipes use the factory hanger locations for an easy installation and exit either behind the rear wheels, which is ideal for towing, or straight out the back under the rear bumper for a muscular look. The system is finished off with a pair of large 3.00-inch polished stainless steel tips. The exhaust system is covered by our Lifetime Limited Warranty and includes all necessary parts and hardware for an easy installation you can do at home. For those who prefer all aluminized steel construction with a 3-year Limited Warranty, check out exhaust system #17424. Note: Fits 2/4 wheel drive models all wheelbases, Except the MegaCab model.

The MagnaFlow Dodge Ram 1500 Street Series Cat-Back Performance Exhaust System brings out the personality of your 5.7L Dodge Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Dodge Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Ram 1500’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15863 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15863 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

The MagnaFlow Dodge Ram 1500 Street Series Cat-Back Performance Exhaust System brings out the personality of your 3.9L, 5.2L, 5.9L Dodge Ram 1500 with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Dual Split Rear exit with 3.5in. Polished Clamp-On Single Wall Angle Cut Rolled Edge tips, this Dodge Ram 1500 exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Dodge Ram 1500’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 15771 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 15771 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

When it comes to performance exhaust systems, most people are looking for three things: Power, sound,and quality. JBA Exhaust Systems deliver the best of all three, giving it both great looks and performance.One of the first performance upgrades typical

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

For the person who is looking for an aluminized steel cat-back exhaust system with an aggressive exterior tone and moderate interior tone. The American Thunder system is heavy 16-gauge mandrel-bent aluminized steel tubing for durability and maximum performance. Includes a aluminized steel Super 50 Series performance muffler for that perfect blend of a deep aggressive exterior sound, with a moderate interior tone that won’t drive you out of the cab when having a conversation. The dual 2.50-inch tailpipes clear the factory spare tire and give you two choices of exit locations. Straight out the back for that true dual look, or exiting out each side behind the rear wheels, which is ideal for towing. The system is finished off with a pair of highly polished 304 stainless steel tips embossed with the Flowmaster name. Designed for an easy fit, these systems include all necessary parts, hardware and instructions for an easy installation you can do at home. Covered by our 3-year Limited Warranty. Notes: Fits 2/4 wheel drive and all wheelbases

“This Flow FX cat-back exhaust system is designed for the 1994-2001 Dodge Ram 1500 with the 3.9L, 5.2L, and 5.9L engines, as well as the 1994-2002 2500/3500 models with the 5.9L engine. Features include 409 stainless steel construction for added durability and 16-gauge 3.0-inch mandrel bent tubing for free unrestricted flow. The compact oval “”straight-through”” Flow FX performance muffler delivers a moderate yet deep and powerful sound while the interior sound is kept very mild. The system uses the factory hanger locations and is finished off with a 4.50-inch black ceramic-coated 304 stainless steel tip embossed with the Flowmaster name. The kit includes detailed instructions and all hardware necessary for a quick and easy installation you can do at home. Backed by Flowmaster’s Limited Warranty.”

BRExhaust Direct-Fit Replacement Exhaust Kit 106-0028 takes the guesswork out of replacing your exhaust system while providing a reliable and high-quality alternative to the OEM exhaust. You will find all of the gaskets and clamps needed to get the job done in the carefully packaged box. 106-0028’s precision mandrel bent pipes facilitate superior exhaust flow compared to the crush-bent pipes commonly used in competing aftermarket replacement exhaust systems. The multi-piece, bolt-on design ensures the exhaust system is easy to install yourself and fits perfectly to help get you back on the road in no time. No bending or welding is required for installation. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0028 includes (3) 2.5in. U-Bolt Clamps, (1) 2.75in. U-Bolt Clamp, (1) 3.125in. U-Bolt Clamp and interchanges with OE parts 52018550, 52019323, 5210 3096AB, 52103094, 52103096, 52103159. BRExhaust Direct-Fit Replacement Exhaust Kit 106-0028 features durable Aluminized Steel construction and is covered by a 2 year warranty.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.