2007 Dodge Caliber Body Parts

Essential Body Parts for 2007 Dodge Calibers

Dorman – Help – Interior Door Handle – Front Left, Rear Left – Chrome (Part No.81593)

Interior Door Handle - Front Left, Rear Left - Chrome

from

$60.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

COAST TO COAST – Chrome Plated, Abs Plastic, Levers Only, With Covers For 4 Doors (Part No.CCIDH68513S)

Chrome Plated, Abs Plastic, Levers Only, With Covers For 4 Doors

from

$69.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
  • Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Pentosin – Automatic Transmission Fluid – 1 Liter and with High Performance (Part No.1058112)

Automatic Transmission Fluid - 1 Liter and with High Performance

from

$27.49
Automatic Transmission Fluid – 1 Liter and with High Performance

Dorman – Hood Release Cable Assembly (Part No.912-437)

Hood Release Cable Assembly

from

$69.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
  • Durable construction -manufactured within strict tolerances for reliable longevity.
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Panel Trim Retainer – Interior – GM/Ford/Chrysler (Part No.45680)

Panel Trim Retainer - Interior - GM/Ford/Chrysler

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

COAST TO COAST – Black, Abs Plastic, Levers Only, With Covers For 4 Doors (Part No.CCIDH68513BBK)

Black, Abs Plastic, Levers Only, With Covers For 4 Doors

from

$69.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
  • Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Dorman – Help – Exterior Door Handle Front Right with Keyhole (Part No.93396)

Exterior Door Handle Front Right with Keyhole

from

$65.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

KAI – Mirror Assembly: Driver Side, Power Adjustment, 1 Pk (Part No.CH1320265)

Mirror Assembly: Driver Side, Power Adjustment, 1 Pk

from

$51.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Driver Side Power Door Mirror, Without Heated Glass, Non-Folding Style. It is Designed to Replace Your Existing Door Mirror. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Non-Folding, Without Heated Glass, Flat Glass
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Impact Absorber (Part No.CH1070806C)

Bumper Impact Absorber

from

$36.99
New CAPA Certified Standard Replacement Front Bumper Impact Absorber, Excludes Caliber SRT-4 Models

Product Features:
  • Excludes Caliber SRT-4 Models, Made Of Expanded Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.CH1251131)

Fender Liner

from

$26.99
New Standard Replacement Passenger Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Door Mirror Switch (Part No.RMC1115)

Door Mirror Switch

from

$228.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Help – Non-Heated Plastic Backed Mirror Left (Part No.56254)

Non-Heated Plastic Backed Mirror Left

from

$39.99
Cracked mirror glass? This door mirror glass is precision-engineered to match the original door mirror glass of specific vehicle years, makes and models for a simple and permanent replacement job.

Product Features:
  • Direct replacement – this door mirror glass is made to match the original mirror glass on specific vehicles.
  • Seamless design – precisely cut to match the shape and look of the factory glass
  • Cost-effective solution – replace only the broken mirror glass rather than the entire mirror assembly
  • Easy installation – follow simple step-by-step procedure to swap out existing glass
See More

Carquest Premium – Power Door Resistance Pinch Sensor (Part No.PDP1171)

Power Door Resistance Pinch Sensor

from

$399.99
Power Door Resistance Pinch Sensor

Carquest Premium – Door Mirror Connector (Part No.PTC2962)

Door Mirror Connector

from

$71.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

KAI – Fender Liner (Part No.CH1250131)

Fender Liner

from

$25.99
New Standard Replacement Driver Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Bumper Cover (Part No.CH1100867)

Bumper Cover

from

$494.99
New Standard Replacement Rear Bumper Cover, Paint To Match, Without Exhaust Cutout, Excludes SRT And RT Models

Product Features:
  • Paint To Match, Without Exhaust Cutout, Excludes SRT And RT Models, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Dorman – Chrysler, Ford Trim Retainer (Part No.963-018D)

Chrysler, Ford Trim Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Rear Bumper Cover Reinforcement Bar; Without Tow; Ultra High Strength Steel (Part No.CH1106207DSC)

Rear Bumper Cover Reinforcement Bar; Without Tow; Ultra High Strength Steel

from

$372.99
New CAPA Certified Premium Replacement Rear Bumper Cover Reinforcement Bar, Without Tow Package

Product Features:
  • Without Tow Package, Made Of Ultra-High Strength Steel
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Atlas Lift – Lift Support (Part No.LS10402)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.749-540)

Window Regulator: Power, 1 Pack

from

$62.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Help – Stainless Steel Door Hinge Screws (Part No.45998)

Stainless Steel Door Hinge Screws

from

$18.29
This door hinge screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge screw matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Sunroof Switch (Part No.SBA2856)

Sunroof Switch

from

$22.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Door Window Switch (Part No.WSA1021)

Door Window Switch

from

$58.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Parking Brake Switch (Part No.SBA4536)

Parking Brake Switch

from

$9.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Integrated Door Lock Actuator (Part No.931-088)

Integrated Door Lock Actuator

from

$121.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

KAI – Bumper Cover (Part No.CH1000871PP)

Bumper Cover

from

$477.99
New CAPA Certified Premium Replacement Front Bumper Cover, Without Fog Lamps, Except Srt-4

Product Features:
  • Without Fog Lamps, Except Srt-4, Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Needa Parts – Push Type Retainer Fascia (Part No.461210B)

Push Type Retainer Fascia

from

$4.99
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More

KAI – Grille, Chrome And Black (Part No.CH1200299PP)

Grille, Chrome And Black

from

$152.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New CAPA Certified Premium Replacement Grille, Chrome and Black, 2007 Design, Will Fit 2008-2010. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.

Product Features:
  • Chrome And Black, 2007 Design, Will Fit 2008-2010, Made Of ABS Thermoplastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Upgrade your 2007 Dodge Caliber with Top-Quality Body Parts

When it comes to maintaining or upgrading your 2007 Dodge Caliber, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Body Parts are key to keeping your Caliber functioning at its best. At Advance Auto Parts, we offer a wide selection of 73 Body Parts for the 2007 Dodge Caliber, designed to meet your needs without breaking the bank. From Vehicle Window replacements to Vehicle Hoods upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2007 Dodge Caliber at great prices. Our Body Parts inventory for this model ranges from just $3.99 to $741.99, with an average price of $107.98. Our 73 Body Parts in stock come from 15 trusted brands, so you’re sure to find the right part for your 2007 Dodge Caliber without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 Dodge Caliber is always ready to roll. We’re committed to providing you with everything you need to keep your Caliber in top shape, all in one place. Start shopping confidently below for your 2007 Dodge Caliber!

Best-Selling Vehicle Windows for 2007 Dodge Calibers

Enhance the driving experience in your Dodge with 4 quality Vehicle Window components, starting at $62.99.

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.748-540)

Window Regulator & Motor Assembly: Power, 1 Pack

from

$99.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
  • Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
See More

Dorman – Window Regulator: Power, 1 Pack (Part No.749-540)

Window Regulator: Power, 1 Pack

from

$62.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
See More

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.748-539)

Window Regulator & Motor Assembly: Power, 1 Pack

from

$115.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
  • Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
See More

Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.748-541)

Window Regulator & Motor Assembly: Power, 1 Pack

from

$95.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.

Product Features:
  • Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
  • Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
  • Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
  • Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
See More

Most Popular 2007 Dodge Caliber Vehicle Hoods

Customize your Dodge with 6 Vehicle Hoods products like Lift Supports and Hood Release Cables, all priced under $69.99.

StrongArm – Liftgate Lift Support: 19.1" Ext Length, 6.75" Travel, 111 Lbs of Force, 1 Pk (Part No.D6216)

Liftgate Lift Support: 19.1" Ext Length, 6.75" Travel, 111 Lbs of Force, 1 Pk

from

$33.99
Lift supports are pressurized cylinders that are used to support hoods, hatches and rear window glass in automotive applications. Lift supports are also used in many non-automotive applications. Each Strongarm lift support is custom engineered, and manufactured beyond industry standards to provide smoother operating, and longer lasting performance. Lift supports should be replaced in pairs to ensure safe, reliable support of your hood, hatch, or liftgate.

Product Features:
  • Exact fit original equipment design guarantees correct fit and function
  • Engineered and built to meet or exceed original equipment quality standards
  • Individually tested for performance and reliability
  • Hardened, nitride plated steel shaft provides optimal durability
  • Rubber O-ring piston seal prevents leakage for a controlled lift and consistent performance
  • Heavy gauge steel body is electrostatically painted and heat cured to OE specs
  • Self-Cleaning Piston Assembly provides smooth operation and more reliable performance
  • Upper bushing is manufactured with quality precision providing exact fit and promotes longer operating life
  • No special installation tools required
See More

Atlas Lift – Lift Support (Part No.LS10402)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Atlas Lift – Lift Support (Part No.LS10391)

Lift Support

from

$27.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:
  • Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
  • Easy Install – Less than 15 Minutes! based on average install time across all parts
  • No Special Tools Required
  • Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
  • OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
  • OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
  • World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
  • Trilingual Install Instructions provided inside each package
See More

Dorman – Hood Release Cable Assembly (Part No.912-437)

Hood Release Cable Assembly

from

$69.99
Hood release cable broken? This hood release cable is durably built to directly replace a worn-out or broken cable on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this hood release cable is made to match the original cable on specific vehicles.
  • Durable construction -manufactured within strict tolerances for reliable longevity.
  • Cost-effective solution – comparable quality for lower cost than buying replacement at the dealership
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

StrongArm – Liftgate Lift Support: 19.1" Ext Length, 6.75" Travel, 123 Lbs of Force, 1 Pk (Part No.D6256)

Liftgate Lift Support: 19.1" Ext Length, 6.75" Travel, 123 Lbs of Force, 1 Pk

from

$54.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.

Product Features:
  • Heavy Gauge Steel Body
  • Self-Cleaning Piston Assembly
  • Rubber O-Ring Piston Seal
  • Non-Stick Back-Up Ring
  • Hardened Nitride Plated Steel Shaft
  • Engineered In USA To OE Quality Standards For Performance And Durability
  • IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
  • Easy To Install In Just Minutes. No Special Tools Required.
  • Exact Fit Original Equipment Design Guarantees Correct Fit And Function
  • Consistent Performance In All Weather Conditions
  • Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
  • Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
See More

Autopart International Inc – Hatch Strut (Part No.O20702202708API)

Hatch Strut

from

$34.50
Hatch Strut

Top Picks for 2007 Dodge Caliber Bodies and Fender Parts

Upgrade Dodge Calibers with top-quality Bodies and Fender Parts parts, including 10 OEM and aftermarket selections for your 2007 model.

Dorman – GM 1/4" Screw Rivets (Part No.961-050D)

GM 1/4" Screw Rivets

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Chrysler, Ford Trim Retainer (Part No.963-018D)

Chrysler, Ford Trim Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Panel Trim Retainer – Interior – GM/Ford/Chrysler (Part No.45680)

Panel Trim Retainer - Interior - GM/Ford/Chrysler

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

KAI – Fender Liner (Part No.CH1250131)

Fender Liner

from

$25.99
New Standard Replacement Driver Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.CH1251131)

Fender Liner

from

$26.99
New Standard Replacement Passenger Side Fender Liner

Product Features:
  • Made Of Plastic
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.CH1250131C)

Fender Liner

from

$41.99
New CAPA Certified Standard Replacement Driver Side Fender Liner

Product Features:
  • Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

KAI – Fender Liner (Part No.CH1251131C)

Fender Liner

from

$40.99
New CAPA Certified Standard Replacement Passenger Side Fender Liner

Product Features:
  • Made Of Polypropylene
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Le Bra – Front End Cover, Vinyl, Black (Part No.551093-01)

Front End Cover, Vinyl, Black

from

$157.99
LeBra Front End Covers by Covercraft are a stylish accessory specifically designed to fit your vehicle. These custom front end covers protect your ride from road damage and rock chips. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. Unexpected road damage is inevitable. The LeBra front end cover provides durable protection against small rocks and stones, insects, love bugs and road tar. Great protection, great style, it’s the easiest way to keep your vehicle protected!

Product Features:
  • Full front end coverage
  • Custom fit exactly to your vehicle
  • Installs easily with no drilling or tools
  • Leather grain vinyl
See More

Covercraft – Custom Hood Protector, Vinyl, Black (Part No.45198-01)

Custom Hood Protector, Vinyl, Black

from

$65.99
Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!Leather grain vinyl
See More

Needa Parts – Push Type Retainer Fascia (Part No.461210B)

Push Type Retainer Fascia

from

$4.99
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:
  • Needa Parts offers a complete assortment for all popular makes and models
  • Vehicle make specific fastener kits are available
  • All fasteners meet or exceed OEM standards
See More

In-Demand Vehicle Doors for 2007 Dodge Calibers

Select from 6 premium Vehicle Doors parts for your 2007 Dodge Caliber, with prices ranging from $18.29 to $399.99.

Dorman – Help – Stainless Steel Door Hinge Screws (Part No.45998)

Stainless Steel Door Hinge Screws

from

$18.29
This door hinge screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this door hinge screw matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Power Door Resistance Pinch Sensor (Part No.PDP1171)

Power Door Resistance Pinch Sensor

from

$399.99
Power Door Resistance Pinch Sensor

Dorman – Integrated Door Lock Actuator (Part No.931-088)

Integrated Door Lock Actuator

from

$121.99
This door lock actuator has undergone extensive quality and safety testing to ensure reliable performance. It is engineered to provide a direct replacement for the stock actuator on specific vehicle years, makes and models.

Product Features:
  • Reliable replacement – this door lock actuator has undergone extensive quality and safety performance testing
  • Perfect fit – engineered to provide the same fit and function of the original actuator on specific vehicle years, makes and models
  • Safety compliant – part has undergone simulated crash testing under government guidelines
  • Long-lasting repair – cycle testing in an actual vehicle door verifies effective usage for years
See More

Carquest Premium – Door Lock Actuator (Part No.DLE1484)

Door Lock Actuator

from

$116.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Door Lock Actuator (Part No.DLE1481)

Door Lock Actuator

from

$113.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Door Mirror Connector (Part No.PTC2962)

Door Mirror Connector

from

$71.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Most Sold 2007 Dodge Caliber Vehicle Latches and Handles

Explore our best-selling Dodge parts for the 2007 Caliber among 11 OEM and aftermarket options starting from $10.99.

AutoCraft – Window Handle (Part No.76932)

Window Handle

from

$12.99
Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:
  • Ideal replacement – this window crank handle matches the fit and function of the original equipment component
  • Durable construction – this window crank handle is made of durable material to withstand extended use
  • Easy to install – this window crank requires no special tools to install
  • Versatile design – this window crank handle is suitable for use in various locations in the vehicle
See More

Dorman – Help – Exterior Door Handle Front/Rear Right (Part No.81378)

Exterior Door Handle Front/Rear Right

from

$33.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

COAST TO COAST – Black, Abs Plastic, Levers Only, With Covers For 4 Doors (Part No.CCIDH68513BBK)

Black, Abs Plastic, Levers Only, With Covers For 4 Doors

from

$69.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
  • Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

COAST TO COAST – Chrome Plated, Abs Plastic, Levers Only, With Covers For 4 Doors (Part No.CCIDH68513S)

Chrome Plated, Abs Plastic, Levers Only, With Covers For 4 Doors

from

$69.99
Coast to Coast International door handle and mirror covers are a quick way to add a touch of chrome or black-out styling to change the appearance of a vehicle. All covers are designed and manufactured to overlay the OEM handle or mirror to give the appearance of a factory upgrade. Installation is quick and easy with no tools required. Pair them with CCI grille overlays and Impostor(R) wheel skins for a complete package look. Limited lifetime warranty. All Coast to Coast International products feature a limited lifetime warranty.

Product Features:
  • A NEW LOOK FOR LESS: Upgrade The Trim Level Appearance Of Your Vehicle With These Door Handle Covers. Add Mirror Covers And Wheel Skins (Sold Separately) For A Factory-Style Package
  • Door Handle Covers Are Year-Make-Model Specific And Available In Different Finishes
  • Fits Like A Glove Over Existing Handles And Stay Securely Attached Using A Retention System Molded Into The Cover So You Can Be Confident That They Wont Fall Off While Driving
  • UV Protected Paint And A Clear Coat Ensure That The Finish Wont Crack Or Fade
  • COMPLEMENTS OEM STYLING, Instantly, And Easily, Upgrades The Vehicle Aesthetics While Complementing The OEM Styling Of The Vehicle
  • EASY TO INSTALL, No Tools Are Required For A Quick, Snap-On Installation That Is Ready To Go In Minutes And Easy To Maintain. Designed And Tested In The USA.
See More

Dorman – Help – Interior Door Handle – Front Left, Rear Left – Chrome (Part No.81593)

Interior Door Handle - Front Left, Rear Left - Chrome

from

$60.99
Want a new interior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Left without keyhole (Part No.93395)

Exterior Door Handle Front Left without keyhole

from

$42.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles.
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Right, Rear Right Without Keyhole (Part No.91065)

Exterior Door Handle Front Right, Rear Right Without Keyhole

from

$39.49
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Left (Part No.91064)

Exterior Door Handle Front Left

from

$35.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Right With Keyhole (Part No.91063)

Exterior Door Handle Front Right With Keyhole

from

$35.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Dorman – Help – Exterior Door Handle Front Right (Part No.81377)

Exterior Door Handle Front Right

from

$30.49
Want a new exterior door handle that matches the original, for far less than going back to the dealership? This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.

Product Features:
  • Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
  • Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
  • Excellent value – original equipment quality at a lower price
  • Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
See More

Crown Auto Jeep Replacmnt – Window Crank Handle, OEM Replacement; Black; Plastic; Black; Single (Part No.FW80PX9)

Window Crank Handle, OEM Replacement; Black; Plastic; Black; Single

from

$10.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Limited 12 Month Or 12,000 Mile Warranty
See More

FAQs for 2007 Dodge Caliber Body Parts

Which Body Parts are best-sellers for 2007 Dodge Calibers?

Out of 73 Body Parts that fit 2007 Dodge Calibers, the following parts are the top sellers:

What’s the price range for 2007 Dodge Caliber Body Parts?

Body Part prices for the 2007 Dodge Caliber start at $3.99 and go up to $741.99 for the most premium parts.

What’s the average price of a Body Part for a 2007 Dodge Caliber?

The average price for Body Parts for the 2007 Dodge Caliber is $107.98. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Body Parts for other Dodge Caliber model years?

Yes, we currently carry Body Parts for 5 model years of Dodge Calibers between 2008 and 2012. Body Parts are bought most frequently for the following model years: 2012, 2011, 2010, 2009, and 2008.

What are the cheapest Body Parts for my 2007 Dodge Caliber?

The cheapest 2007 Dodge Caliber Body Parts we carry in stock are:

What types of Body Parts do you sell for my 2007 Dodge Caliber?

As of 2/5/25, these are some of the most in-demand types of Body Parts for a 2007 Dodge Caliber:

Can I get help with 2007 Dodge Caliber Body Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Body Parts and more.

What is your return policy for Dodge Caliber Body Parts?

Advance Auto Parts keeps returns simple. For new Dodge Caliber Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.