2007 Chrysler 300 Alternators and Starters
Find Your Specific 2007 Chrysler 300 Alternators and Starters
Below you will find various in-demand Chrysler Alternators and Starters, components and accessories for your 2007 300. Advance Auto Parts has popular 300 parts like Alternator Parts, Ignition Lock Parts, Starter Parts and more. You’ll also find aftermarket and OEM Alternators and Starters for other 300 model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 2007 Chrysler 300 Alternators and Starters below and start saving instantly.
Popular 2007 Chrysler 300 Alternators and Starters Categories
Essential Alternators and Starters for 2007 Chrysler 300s
Carquest Premium – Alternator: Remanufactured, 160 Amps (Part No.11572A)
from
$464.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Bosch – Bosch, Alternator (Part No.F40001332129BOS)
from
$266.66
Bosch, Alternator
Carquest Professional – Alternator: New, 160 Amps (Part No.11572AN)
from
$615.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- All new components are utilized to ensure long service life
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
- Rotors and stators are load tested and double insulated for maximum charging performance
Bosch – Alternator: Remanufactured, 180 Amps (Part No.AL6488X)
from
$428.99
Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Bosch – Alternator: Remanufactured, 220 Amps (Part No.AL6489X)
from
$454.99
Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Carquest Premium – Alternator: Remanufactured, 60 Amps (Part No.7024A)
from
$82.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Alternator: Remanufactured, 160 Amps (Part No.11574A)
from
$243.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Alternator Connector (Part No.PTA1661)
from
$2.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Alternator Connector (Part No.PTA1445)
from
$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Carquest Premium – Starter Remanufactured Premium (Part No.17896S)
from
$164.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter Remanufactured Premium (Part No.19025S)
from
$211.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Starter Remanufactured Premium (Part No.19030S)
from
$169.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Bosch – Premium Starter: For Reliable Engine Starts (Part No.F50001332784BOS)
from
$219.16
Premium Starter: For Reliable Engine Starts
Bosch – Remanufactured Starter (Part No.SR6491X)
from
$156.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.
See More
Bosch – Premium 100% Remanufactured Starter (Part No.SR6459X)
from
$198.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
- Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
- Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
- Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
Bosch – Remanufactured Starter (Part No.SR6487X)
from
$148.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.
See More
OE+ – Starter (Part No.F50002056173IAP)
from
$184.89
Starter
Carquest HD Electrical – Starter: New, 12V, 10 Tooth (Part No.72-17466N)
from
$230.99
Carquest Starters take advantage of the power of 100% NEW to restore hard working vehicles to OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest Starters are primed to keep fleets moving forward. Built to perform in severe duty environments, with high output capabilities built in through improved technical & material formulas for high power output and efficient performance.
Product Features:
See More
Product Features:
- High quality components form the foundation our parts are built from. Transpo¿s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
- Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
- Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
- Integrated magnetic switch provides protection against weak power from batteries.
- Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
- Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Dorman – Dorman Ignition Lock Cylinder (Part No.M5040306028DOR)
from
$191.12
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.
Product Features:
See More
Product Features:
- Direct replacement and operation
- Includes easy to follow instructions with no need for any specialized tools or equipment
- Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
Locksmart – Ignition Lock Cylinder (Part No.LC64750)
from
$78.99
LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
- Constructed from high-grade materials to ensure durability and longevity
- Undergoes 100% testing for proper fit, form, and function
- As a global manufacturer, we maintain complete quality control throughout the manufacturing process
Dorman – Mechanical Key Relearn Ignition Lock Cylinder: OE Fix; Coding Tool Included (Part No.924-784)
from
$125.99
If you need to replace an ignition lock cylinder, this Dorman OE FIX solution makes it as easy as possible. An ignition lock cylinder replacement usually requires a tedious, manual recoding process. This cylinder includes a unique coding tool that allows you to easily, instantly code the new cylinder to your existing key with just a few twists of the wrist.
Product Features:
See More
Product Features:
- Smarter solution – this replacement ignition lock cylinder includes an exclusive tool that codes the new cylinder to your existing key.
- Saves time – by avoiding a manual recoding process, reduce install time by as much as an hour.
- Incredibly simple – to code the new cylinder, simply insert the existing key into the tool, fully turn clockwise and then counter-clockwise, and remove
- Application specific – made to replace the original cylinder on a wide range of Chrysler, Dodge, Jeep and Plymouth model years
Dorman – Ignition Lock Cylinder (Part No.M5040305616DOR)
from
$103.81
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.
Product Features:
See More
Product Features:
- Direct replacement and operation
- Includes easy to follow instructions with no need for any specialized tools or equipment
- Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.989-016)
from
$29.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models.
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder.
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.924-703)
from
$83.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models.
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder.
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest – Ignition Lock Cylinder (Part No.CS901L)
from
$78.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.989-002)
from
$18.79
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models.
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder.
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Ignition Lock Cylinder CSA1417 (Part No.CSA1417)
from
$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Upgrade your 2007 Chrysler 300 with Top-Quality Alternators and Starters
When it comes to maintaining or upgrading your 2007 Chrysler 300, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chrysler or enhancing its overall performance, Alternators and Starters are key to keeping your 300 functioning at its best. At Advance Auto Parts, we offer a wide selection of 36 Alternators and Starters for the 2007 Chrysler 300, designed to meet your needs without breaking the bank.
From
Alternator Part
replacements to
Ignition Lock Parts
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Alternators and Starters for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Alternators and Starters for your 2007 Chrysler 300 at great prices.
Our Alternators and Starters inventory for this model
ranges from just $38.99 to $327.15, with
an average price of $177.17.
Our 36 Alternators and Starters in stock come from 8 trusted brands, so you’re sure to find the right part for your 2007 Chrysler 300 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 Chrysler 300, we stock popular OEM and aftermarket Alternators and Starters from top names
like Carquest Professional, Carquest Premium, Dorman, and more.
Carquest Professional Alternators and Starters
start at just $199.99 and boast an impressive 5 stars average rating from customers.
Carquest Premium and Dorman also bring quality to the table, with Alternators and Starters available starting at $38.99, and at an average 4 stars rating.
With 839 customer reviews and counting, our 2007 Chrysler 300 Alternators and Starters have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Alternators and Starter upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2007 Chrysler 300 is always ready to roll. We’re committed to providing you with everything you need to keep your 300 in top shape, all in one place.
Start shopping confidently below for your 2007 Chrysler 300!
Best-Selling Alternator Parts for 2007 Chrysler 300s
Enhance the driving experience in your Chrysler with 11 quality Alternator Part components, starting at $38.99.
Carquest Premium – Alternator: Remanufactured, 140 Amps (Part No.11112A)
from
$205.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Alternator: Remanufactured, 160 Amps (Part No.11113A)
from
$153.99
Carquest Premium alternators are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium alternators are designed to meet or exceed OE specifications for fit, form and function. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- 100% new OE-quality brushes and bearings are used to ensure long service life
- Rotors and stators are load tested and double insulated for maximum charging performance
- Slip rings are precision polished for maximum brush contact and service life
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Professional – Alternator: New, 160 Amps (Part No.11113AN)
from
$219.99
Carquest Professional alternators are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new alternators are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional alternators are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new alternators are built with all new components and are 100% triple tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- All new components are utilized to ensure long service life
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Regulators and rectifiers are 100% electronically load tested for reliable charging performance
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
- Rotors and stators are load tested and double insulated for maximum charging performance
Carquest Standard – Alternator: Remanufactured, 160 Amps (Part No.11113AV)
from
$125.99
Carquest Standard alternators are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our alternators are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard alternators are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Alternator Connector (Part No.PTA1445)
from
$38.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Bosch – Alternator: Remanufactured, 160 Amps (Part No.AL6435X)
from
$313.99
Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Bosch – Professional Preferred Alternator, Remanufactured (Part No.F4000465096BOS)
from
$327.15
Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers.
Product Features:
See More
Product Features:
- Built to last using the highest quality materials and the most technologically advanced manufacturing processes
- Remanufactured using more new parts than any other unit
- 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
- Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
- Voltage regulator 100% tested for OE voltage specifications (new on GM and Ford)
- Rectifier 100 % tested (new on Ford)
- Diodes 100% tested (replaced with new as required)
- Rotor 100% performance-tested for maximum electrical output
- 100% new long life sealed bearings with special high load, high temperature grease
- Stator 100% insulation and phase balance tested
- Slip rings 100% new or remachined to +/- .05mm, the tightest tolerance in the industry
- 100% new long life self-lubricating brushes
- 100% new clutch pulleys
- All terminals, insulators and hardware provided
Bosch – Alternator: Remanufactured, 140 Amps (Part No.AL6446X)
from
$307.99
Bosch Premium Alternators are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Full-load tested to guarantee compliance with Bosch’s strict performance specifications
- 100% factory tested, units are remanufactured (not rebuilt)
- Built to last – uses high quality materials and the most technologically advanced developments.
Bosch – Bosch, Alternator (Part No.F40001332129BOS)
from
$266.66
Bosch, Alternator
OE+ – Remanufactured Alternator (Part No.F40002247171IAP)
from
$253.44
Are you looking for a quality replacement part for your vehicle’s electrical system? Today’s remanufactured alternator is a complex combination of inner workings, and we completely remanufacture them to our own premium standard. All terminals are cleaned and replated. The slip rings are polished or replaced to maintain proper contact. The rectifier, diodes, rotor and bearings are performance tested or replaced for maximum output. All housings are cleaned and refinished and all stators are tested for integrity and recoated for corrosion prevention.
Product Features:
See More
Product Features:
- OE-Equivalent Direct Fit Application.
- Fully tested to meet OE specifications.
- Provides exceptional reliability.
OE+ – Remanufactured Alternator (Part No.F40002246456IAP)
from
$205.65
Are you looking for a quality replacement part for your vehicle’s electrical system? Today’s remanufactured alternator is a complex combination of inner workings, and we completely remanufacture them to our own premium standard. All terminals are cleaned and replated. The slip rings are polished or replaced to maintain proper contact. The rectifier, diodes, rotor and bearings are performance tested or replaced for maximum output. All housings are cleaned and refinished and all stators are tested for integrity and recoated for corrosion prevention.
Product Features:
See More
Product Features:
- OE-Equivalent Direct Fit Application.
- Fully tested to meet OE specifications.
- Provides exceptional reliability.
Most Popular 2007 Chrysler 300 Ignition Lock Parts
Customize your Chrysler with 6 Ignition Lock Parts products
like Ignition Lock Cylinders, all
priced under $191.12.
Dorman – Ignition Lock Cylinder: Two Keys Included (Part No.924-703)
from
$83.99
This ignition lock cylinder is designed to match the fit, function and performance of the original equipment part on specified vehicles. It is engineered to help restore ignition lock function when an original cylinder is broken or worn out.
Product Features:
See More
Product Features:
- Direct replacement – this ignition lock cylinder matches the fit and function of the original equipment assembly on certain vehicle years, makes and models.
- Ideal solution – engineered to help restore and ensure the functionality of the lock cylinder.
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Carquest – Ignition Lock Cylinder (Part No.CS901L)
from
$78.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Professional quality construction using solid brass tumblers, chrome plated brass keys, die-cast zinc lock cores and multiple, randomly assigned key codes ensures superior operation
- Decades of industry leading research and development focused on meeting the technician’s needs
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
Dorman – Mechanical Key Relearn Ignition Lock Cylinder: OE Fix; Coding Tool Included (Part No.924-784)
from
$125.99
If you need to replace an ignition lock cylinder, this Dorman OE FIX solution makes it as easy as possible. An ignition lock cylinder replacement usually requires a tedious, manual recoding process. This cylinder includes a unique coding tool that allows you to easily, instantly code the new cylinder to your existing key with just a few twists of the wrist.
Product Features:
See More
Product Features:
- Smarter solution – this replacement ignition lock cylinder includes an exclusive tool that codes the new cylinder to your existing key.
- Saves time – by avoiding a manual recoding process, reduce install time by as much as an hour.
- Incredibly simple – to code the new cylinder, simply insert the existing key into the tool, fully turn clockwise and then counter-clockwise, and remove
- Application specific – made to replace the original cylinder on a wide range of Chrysler, Dodge, Jeep and Plymouth model years
Carquest Premium – Ignition Lock Cylinder CSA1417 (Part No.CSA1417)
from
$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Computer-Aided Design (CAD), laser scanning and 3D printing ┐ utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) ┐ in the connector terminal design process ensures speed-to-market and a precise connector fit guaranteed.
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure confidence and product reliability, every time.
Dorman – Ignition Lock Cylinder (Part No.M5040305616DOR)
from
$103.81
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.
Product Features:
See More
Product Features:
- Direct replacement and operation
- Includes easy to follow instructions with no need for any specialized tools or equipment
- Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
Dorman – Dorman Ignition Lock Cylinder (Part No.M5040306028DOR)
from
$191.12
Dorman Ignition Lock Cylinders are part of the Ignition Lock Assembly and failure is due to wear and tear from continual key rotation. The purpose of the Ignition Lock Cylinder is to provide a level of security that requires a coded metal Ignition Key in order for the vehicle Ignition Switch to be operated and energized, thereby allowing the vehicle to be started and operated.
Product Features:
See More
Product Features:
- Direct replacement and operation
- Includes easy to follow instructions with no need for any specialized tools or equipment
- Tumblers are included for optional rekeying, eliminating the need to carry 2 keys and reprogram a new anti-theft key
Top Picks for 2007 Chrysler 300 Starter Parts
Upgrade Chrysler 300s with top-quality Starter Parts parts, including 19 OEM and aftermarket selections for your 2007 model.
Carquest Premium – Starter Remanufactured Premium (Part No.19025S)
from
$211.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Bosch – Professional Preferred Starter, Remanufactured (Part No.F50001332761BOS)
from
$254.53
Bosch has been a major supplier of new alternators and starters to OE vehicle manufacturers since 1913. Securing OE certification requires strict adherence to stringent precision and performance criteria. These same exacting criteria are also applied in the manufacturing of all Bosch aftermarket alternators and starters. Whether 100% remanufactured or new, Bosch Premium Alternators and Starters are quality built and 100% factory tested to ensure years of reliable performance, even under the most extreme operating conditions. That’s why they are preferred by more professional installers. Bosch 24 Month Roadside Protection Plan Only Bosch offers the peace-of-mind of this value-added totally FREE, emergency roadside assistance program. Simply stated, if any Bosch Premium Alternator or Starter fails within two years of the date of purchase, Bosch will provide a free jump-start or tow from a qualified roadside service provider. This exclusive Bosch service is available 24 hours a day, seven days a week, anywhere in the United States or Canada.
Product Features:
See More
Product Features:
- Built to last using the highest quality materials and the most technologically advanced manufacturing processes
- Remanufactured using more new parts than any other unit
- 100% exhaustive multipoint quality and performance testing throughout the remanufacturing process ensures optimum starting and charging performance under all operating conditions
- Every unit is full-load tested to guarantee compliance with Bosch strict performance specifications
- 24-month unlimited mileage warranty Remanufacturing Process
- Solenoid with 100% new terminal hardware, contact face and high temperature cap, are completely disassembled and computer performance tested for pull/hold strength
- 100% new long life self-lubricating brushes
- Gear train all new bushings
- Drive with 100% new bushings, springs, rollers, washers caps and high temperature lubrication
- Gear train lubricated with OE-specified grease providing protection from – 4 0 ?F to +3 02 ?F
- Commutator remachined to Bosch tight tolerances
- Permanent magnets/field coils tested for field strength and shorts (replaced with new as required)
- Armature continuity tested, gauged, straightened and shimmed
- All electrical connections resoldered
- All shaft splines and load bearing surfaces lubricated with OE high temperature grade
Carquest Premium – Starter Remanufactured Premium (Part No.17896S)
from
$164.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter Remanufactured Premium (Part No.17898S)
from
$127.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
Carquest Premium – Starter (Part No.17910S)
from
$159.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- 100% remanufactured drive clutch assembly ensures lasting performance
- Armatures and commutators are 100% load tested
- New motor lead terminals and solenoid contacts are used to ensure maximum connectivity
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Carquest Premium – Starter Remanufactured Premium (Part No.19030S)
from
$169.99
Carquest Premium starters are premium constructed, original equipment (O.E.) replacement parts with industry-leading warranties. Our Carquest Premium starters are designed to meet or exceed OE specifications for fit, form and function. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. We replace all wear components (brushes, bushings and needle bearings) with new components to ensure long-life. All critical components are electronically tested during assembly and the entire unit is 100% tested, ensuring proper performance backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
See More
DENSO – First Time Fit Starter, Remanufactured (Part No.F5000338189ND)
from
$164.24
DENSO remanufactured starters are subjected to rigorous testing; Armatures and field coils are high-voltage tested; commutators are refinished and performance-validated; terminals and fasteners are replaced with high-quality copper components. Every starter is exactingly bench-tested to ensure factory-original performance.
Product Features:
See More
Product Features:
- High-voltage tested armature and field coils to ensure reliable performance
- Premium copper terminals to ensure a clean source of electrical current
- All-new bearings, brushes, and seals
- Maximum cranking torque under all conditions
- Class leaders in size and weight
- Environmentally designed to start in cold and hot weather conditions
Bosch – Premium 100% Remanufactured Starter (Part No.SR6459X)
from
$198.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
- Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
- Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
- Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
Carquest Professional – Starter-New (Part No.17910SN)
from
$199.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-10366
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
WAI – 1.2 Kw/12 Volt, CW, 10-Tooth Pinion (Part No.19025N)
from
$221.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
WAI – 1.4kW/12 Volt, CW, 13-Tooth Pinion (Part No.17896N)
from
$186.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
Bosch – Premium 100% Remanufactured Starter (Part No.SR6450X)
from
$141.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
- Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
- Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
- Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
Carquest Professional – Starter-New (Part No.17896SN)
from
$318.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-10359
Carquest Professional – Starter-New (Part No.19025SN)
from
$228.99
Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
- Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
- All new components are utilized to ensure long service life
- Internal electronics are upgraded for heavy duty reliability (where applicable)
- Armatures and commutators are 100% load tested
- Application-specific technical bulletins included where applicable
- All units are 100% triple tested to ensure quality and performance
- Technical support team staffed with ASE Certified Technicians: 1-800-228-10423
WAI – 1.4kW/12 Volt, CW, 13-Tooth Pinion (Part No.19030N)
from
$225.99
WAI is a leading parts manufacturer for the aftermarket. You’ll find superior quality and performance on all WAI 100% new alternators and starters as well as generators, motors, voltage regulators, rectifiers and other components.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OEM specifications for a perfect fit and hassle-free installation.
- Premium grade solenoids contains materials specifically selected for best conductivity. High temperature cap ensures that the solenoid works flawlessly in high heat environments. High dielectric strenght outer case resists shorting.
- Armatures have precision machined and upgraded steel shaft for improved durability and performance.
- Each unit includes a printed copy of the test results so you know exactly what to expect from our parts right from the first time they power on.
DENSO – First Time Fit Starter, Remanufactured (Part No.F5000688541ND)
from
$194.44
DENSO remanufactured starters are subjected to rigorous testing; Armatures and field coils are high-voltage tested; commutators are refinished and performance-validated; terminals and fasteners are replaced with high-quality copper components. Every starter is exactingly bench-tested to ensure factory-original performance.
Product Features:
See More
Product Features:
- High-voltage tested armature and field coils to ensure reliable performance
- Premium copper terminals to ensure a clean source of electrical current
- All-new bearings, brushes, and seals
- Maximum cranking torque under all conditions
- Class leaders in size and weight
- Environmentally designed to start in cold and hot weather conditions
Bosch – Premium 100% Remanufactured Starter (Part No.SR6454X)
from
$161.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.
Product Features:
See More
Product Features:
- Built for extremes! Our new and reman starters and alternators are 100% factory tested to ensure reliable performance, under extremes of heat, cold and high demand
- Our new and reman starters and alternators are designed to perform equal to or better than the original equipment parts, that they replace
- Our new and reman starters and alternators are designed to be identical in fit and performance to original equipment parts
- Our new and reman starters and alternators utilize the latest manufacturing technologies and highest quality parts to ensure the best performance and longest life
Bosch – Remanufactured Starter (Part No.SR6523X)
from
$156.99
Bosch Premium Starters are designed, built and tested to provide the ultimate in performance and reliability.
See More
OE+ – Starter (Part No.F50002246688IAP)
from
$143.16
Starter
Top-Rated Alternators and Starters Brands For Your 2007 Chrysler 300
Shop for the best-rated brands offering Alternators and Starters and other products for your 2007 Chrysler 300s. Below you’ll find some of our best rated Alternators and Starters from Carquest Professional, Carquest Premium, and Dorman, and more. Alternators and Starters from these brands that fit a 2007 300 start at just $38.99 and are rated as high as 5 stars. OEM and aftermarket Alternators and Starters don’t get more top quality, durable, and affordable than from the brands below.
Popular Carquest Professional 2007 Chrysler 300 Alternators and Starters
When it comes to maintaining or upgrading your 2007 Chrysler 300, using quality Alternators and Starters is essential to ensure durability and a perfect fit. Carquest Professional ticks all of those boxes. We offer a wide selection of Carquest Professional Alternators and Starters, specifically designed for the 2007 Chrysler 300. With over 4 Carquest Professional brand Alternators and Starters in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $199.99, with an average price of just $241.99. Plus, with over 14 customer reviews and an average rating of 5 stars, you can trust that our Carquest Professional Alternators and Starters will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Carquest Premium 2007 Chrysler 300 Alternators and Starters
Carquest Premium auto parts is one of the highest quality Alternators and Starter brands in the market. Any 2007 Chrysler 300 owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2007 300, Advance Auto Parts carries a full inventory of 9 Carquest Premium Alternators and Starters. Plus you will be keeping your Chrysler in peak condition while saving money because prices on these Carquest Premium Alternators and Starters range from $38.99 to $211.99, plus, with more than 124 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Alternators and Starters below will deliver on both quality and value.
FAQs for 2007 Chrysler 300 Alternators and Starters
Which Alternators and Starters are best-sellers for 2007 Chrysler 300s?
Out of 36 Alternators and Starters that fit 2007 Chrysler 300s, the following parts are the top sellers:
- Alternator: New, 160 Amps (10107791) – $219.99
- Starter Remanufactured Premium (20840543) – $164.99
- Ignition Lock Cylinder: Two Keys Included (15100000) – $83.99
What’s the price range for 2007 Chrysler 300 Alternators and Starters?
Alternators and Starter prices for the 2007 Chrysler 300 start at $38.99 and go up to $327.15 for the most premium parts.
What’s the average price of a Alternators and Starter for a 2007 Chrysler 300?
The average price for Alternators and Starters for the 2007 Chrysler 300 is $177.17. Keep in mind the variety of part types within our Alternators and Starter category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Alternators and Starters for other Chrysler 300 model years?
What are the cheapest Alternators and Starters for my 2007 Chrysler 300?
The cheapest 2007 Chrysler 300 Alternators and Starters we carry in stock are:
- Alternator Connector (12447050) – $38.99
- Ignition Lock Cylinder (20976013) – $78.99
- Ignition Lock Cylinder CSA1417 (12526261) – $78.99
- Ignition Lock Cylinder: Two Keys Included (15100000) – $83.99
- Ignition Lock Cylinder (10775748) – $103.81
What are the top-rated Alternators and Starters that fit the 2007 Chrysler 300?
Out of 839 reviews by customers, our 2007 Chrysler 300 Alternators and Starters have an average customer rating of . These are some of the highest-rated Alternators and Starter types for the 2007 Chrysler 300 and their top-rated products:
- Ignition Lock Parts
- Ignition Lock Cylinder: Two Keys Included (15100000) – $83.99
- Ignition Lock Cylinder (20976013) – $78.99
- Starter Parts
- Ignition Lock Cylinder: Two Keys Included (15100000) – $83.99
- Ignition Lock Cylinder (20976013) – $78.99
- Alternator Parts
- Ignition Lock Cylinder: Two Keys Included (15100000) – $83.99
- Ignition Lock Cylinder (20976013) – $78.99
What types of Alternators and Starters do you sell for my 2007 Chrysler 300?
As of 2/5/25, these are some of the most in-demand types of Alternators and Starters for a 2007 Chrysler 300:
Can I get help with 2007 Chrysler 300 Alternators and Starter orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chrysler Alternators and Starters and more.
What is your return policy for Chrysler 300 Alternators and Starters?
Advance Auto Parts keeps returns simple. For new Chrysler 300 Alternators and Starters and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
