2007 Chevrolet Trailblazer Differentials

Essential 2007 Chevrolet Trailblazer Differentials

Yukon Gear – 8.6" GM Standard Open Side Gear Thrust Washer (Part No.33386)

8.6" GM Standard Open Side Gear Thrust Washer

from

$4.99
8.6″ GM standard Open side gear Thrust washer.

Product Features:
  • Side gear thrust washer
  • Fits GM 8.6″
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Motive Gear – Differential Spool (Part No.FS10-30)

Differential Spool

from

$187.99


Product Features:
  • FULL SPOOL GM 8.5 30 SPL ST MUST USE 2-LM102911 & 2-LM102949
See More

Yukon Gear – Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal (Part No.41210)

Adapter Sleeve Fro GM 7.2", 7.625" & 8.0" Yokes To Use Triple Lip Pinion Seal

from

$25.99
Yukon 4340 Chrome-Moly replacement outer stub for D44 ’87-’94 Wrangler with a length of 8.31″ and 27 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • 27 spline
  • 8.31″ long
  • Fits Dana Spicer 30 in 1987-1994 Wrangler
  • Outer stub
  • 5-760X U-joint size
  • 4340 Chromoly
  • For WARN hub conversion only
See More

USA Standard Gear – Master Overhaul Kit for the ’09 and Newer GM 8.6" Differential (Part No.37060)

Master Overhaul Kit for the '09 and Newer GM 8.6" Differential

from

$319.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits 2009 and up GM 8.6″
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

Pro-King – Differential Cover Plug (Part No.742G484)

Differential Cover Plug

from

$6.59
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pinion Nut Washer (Part No.33167)

Pinion Nut Washer

from

$14.99
Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.5″, 8.6″ & 9.5″.

Product Features:
  • Pinion nut washer for GM 7.2″ IFS, 7.5″, 7.625″, 7.6″ IFS, 8.5″, 8.6″ and 9.5″.
See More

Motive Gear – Differential Carrier Gear Kit (Part No.GM8.6BIL)

Differential Carrier Gear Kit

from

$231.99
This Motive Gear Differential Rebuild Kit includes all of the parts required to rebuild your stock open differential. The gears are lapped for quiet operation. Includes spider and side gears, cross shaft, lock pin or bolt and thrust washers.

Product Features:
  • GM8.6″ INTERNAL KIT (OPEN) 30 SPL. MID 2000-2008
See More

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25"

from

$27.99
8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:
  • Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″
See More

Dorman – Front Axle Shaft Assembly (Part No.630-417)

Front Axle Shaft Assembly

from

$357.99
Axle shaft damaged or bearings worn out? This axle shaft assembly directly replaces the original equipment on certain vehicles, ready for install right out of the box.

Product Features:
  • Direct replacement – this axle shaft assembly replaces the original equipment on specific vehicle years, makes and models
  • Ready to install – comes pre-assembled for simple installation with no further assembly required
  • Durable construction – designed to rigorous standards and tested to ensure performance
  • Trustworthy solution – backed by team of engineers and quality control specialists in the United States
See More

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Motive Gear – Differential Gear Install Kit (Part No.GM9.5IKL)

Differential Gear Install Kit

from

$79.99


Product Features:
  • MINI INSTALL KIT-GM9.5/CHRY9.25 FRT
See More

Yukon Gear – Replacement Bare Case For GM 8.5" & 8.6" Dura Grip (Part No.20107)

Replacement Bare Case For GM 8.5" & 8.6" Dura Grip

from

$386.99
Replacement bare case for GM 8.5″ & 8.6″ Yukon Dura Grip. Fits both 28 & 30 spline applications. This carrier case is for a Yukon Dura Grip ONLY. It is NOT a replacement carrier for a stock positraction.

Product Features:
  • Dura Grip positraction carrier case
  • Does not include spider gears
  • Fits GM 8.5″ and 8.6″
  • Fits 2.76 and up ratios only
See More

Yukon Gear – Differential Cover B (Part No.33569)

Differential Cover B

from

$5.99
Differential Cover B

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

3 Qt - 80W90 Conventional Gear Oil With Posi Additive

from

$57.99
3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:
  • Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
See More

Pro-King – Differential Cover Gasket (Part No.742G303A)

Differential Cover Gasket

from

$31.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)

Differential Carrier Shim Kit

from

$21.99


Product Features:
  • KIT SHIM SIDE 9.5″ GM
See More

Yukon Gear – Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles (Part No.26016)

Dura Grip Positraction For GM 8.5" & 8.6" With 30 Spline Axles

from

$929.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Product Features:
  • Fits GM 8.5″ and 8.6″ with 30 spline axles
  • 2.73 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

FAG US – CONE (Part No.KJLM506849-A)

CONE

from

$51.99
CONE

Yukon Gear – 8.6" GM 12P 12T & F8.8 Carrier Installation Kit (Part No.57010)

8.6" GM 12P 12T & F8.8 Carrier Installation Kit

from

$121.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for GM 8.6″, 12 bolt car and 12 bolt truck differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits GM 12 bolt passenger car and truck and 8.6″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

Yukon Gear – Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear – Approx 0.620" Long (Part No.33097)

Crush Sleeve For GM 7.6" IRS, 8.5", 8.6", 8.75", 8.875" & Nissan Titan Rear - Approx 0.620" Long

from

$5.99
Replacement Crush Sleeve for GM 7.6″ IRS, 8.5″, 8.6″, 8.75″, 8.875″ & Nissan Titan rear. Approx 0.620″ long.

Product Features:
  • Crush sleeve for Jeep JK rear, GM 7.6″ IRS, 8.5″ and 8.6″ and Nissan Titan rear
  • 0.620″ tall
See More

Dorman – 4 Wheel Drive Oil Seal (Part No.600-606)

4 Wheel Drive Oil Seal

from

$34.99
This axle differential seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle differential seal is designed to match the fit and function of the original seal on specified vehicles.
  • Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Positraction Clutch Guide (Part No.33352)

Positraction Clutch Guide

from

$8.99
Positraction clutch guide.

Product Features:
  • Clutch guide for Chrysler 9.25″, Dana Spicer 44, Dana Spicer 50, Ford 8.8″, GM 12 bolt passenger car, GM 8.2″, 8.5″ and 8.6″, 1963-1979 Corvette and Nissan Titan
  • Compatible with Dura Grip positractions only
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Ring Gear Bolt (Part No.33049)

Ring Gear Bolt

from

$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:
  • Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
  • 7/16″ x 20
See More

National – Bearings (Part No.M802048)

Bearings

from

$23.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Motive Gear – Pinion Nut (Part No.1260823)

Pinion Nut

from

$8.49
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

2007 Chevrolet Trailblazer Differentials

Maybe you’re in the middle of a full rebuild of that 2007 Chevrolet Trailblazer. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 208 different Differentials in our inventory ranging from $1.99 to $1,839.99. That means you can find the exact parts or products you need to keep that 2007 Chevrolet Trailblazer running smoothly.

Differentials are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 2007 Chevrolet Trailblazer. Valvoline, Royal Purple, and FELPRO are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2007 Chevrolet Trailblazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,278 reviews in this category, some of the top rated parts include Taper Bearing Set with 4.4 stars and Differential Carrier Gear Kit with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 2007 Chevrolet Trailblazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2007 Chevrolet Trailblazer Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 Chevrolet Trailblazer demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Trailblazer the best it can be. Be sure to browse some of our top Differentials brands and parts.

Top 2007 Chevrolet Trailblazer Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 2007 Chevrolet Trailblazer. Popular Felpro parts include:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $7.99
(20)
Differential Cover Gasket
Rear Differential Cover Gaskets
Differential Cover Gasket
from $41.99
(4)
Differential Cover Gasket
Rear Housing Cover Gaskets

FAQs for 2007 Chevrolet Trailblazer Differentials

What are the most purchased Differentials for the 2007 Chevrolet Trailblazer?

Out of 208 Differentials for the 2007 Chevrolet Trailblazer, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
Transfer Case Fluid, 1 Quart
from $14.99
(36)
Transfer Case Fluid, 1 Quart
Differential Oil

What are the top-rated 2007 Chevrolet Trailblazer Differentials?

Top-rated Differentials for your 2007 Chevrolet Trailblazer based on customer reviews/ratings are:
Taper Bearing Set
from $10.79
(33)
Taper Bearing Set
“Everything worked as it should 5 stars”
Differential Carrier Gear Kit
from $231.99
(16)
Differential Carrier Gear Kit
“First set of gears were not complete. But staff reordered them, had them next day. Thanks”
Multi Purpose Seal
from $16.99
(14)
Multi Purpose Seal
“correct part easy to install”