2007 BMW M5 Performance Air Intake Kits

Essential 2007 BMW M5 Performance Air Intake Kits

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-10852)

Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Dry Air Filter For Easy Maintenance

from

$681.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro DRY S Air Filter For Maximum Convenience
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 51% cfm Flow Gain
  • Improved Throttle Response
See More

aFe POWER – Momentum Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-76301)

Momentum Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow

from

$756.99
aFe is proud to introduce the all new Momentum sealed intake system for the 2012-2016 BMW M5 (F10) with the V8-4.4L twin-turbo engine. This all new Momentum intake system produced up to 28hp and 31lbs. x ft. torque and outflows the factory intake by 29%. This highly engineered intake system uses twin black rotomolded airboxes that keeps warm engine air out for maximum performance. The housing use a unique Patent Pending filter to housing interface that enables us to use the largest filters possible while maintaining a simple hassle-free installation. The C.A.D. designed intake tubes are engineered to unleash all available horsepower and to fit perfectly. The kit comes complete will all necessary hardware.

Product Features:
  • Pro 5R Filter Media
  • 360 deg. Radial Flow Air Filter
  • 5 Layer Cotton Gauze High Flow Oiled Filter
  • Washable And Reusable
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-11272)

Magnum FORCE Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow

from

$730.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • Increased Horsepower And Torque
  • Improved Throttle Response
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 31 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-13030R)

Magnum FORCE Cold Air Intake: Gain up to 31 Horsepower! Oiled Air Filter For Maximum Airflow

from

$658.99
Large Five Layer Performance Air Filters: These 360-degree radial flow air filters feature a 4″ flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air and deliver the highest power gains in most cases. This media is perfect for street and/or track use.Dual Heat-Resistant Housings: The included massive air filters are surrounded by open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. Their open design allows for easy viewing of their air filter, yet creates a heat-blocking seal when the vehicle’s hood is closed.Optional Dynamic Air Scoops: In addition to the system’s built-in air inlets, optional Dynamic Air Scoops (sold separately) are available to bring more cool air from the front of the vehicle into the intake housing (PN 54-12489-C).Dyno-Tuned Intake Tubes: This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.

Product Features:
  • +26 lbs. x ft. TQ & +31 HP
  • Outflows Factory Intake by 19%
  • Measured Flow: 595 CFM @ 7″ H2O
  • Seals to hood when closed to reduce intake air temperature
See More

K&N – Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter (Part No.69-2003TFK)

Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter

from

$599.99
The K&N 69-2003TFK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some BMW M6 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-2003TFK air intake comes with dual black rubber topped K&N high-flow air filters with heat shields that install into the previous air box areas. Air is directed through the intake tubes into the engine’s throttle bodies for a guaranteed power gain. The intake tubes have an attractive flat black powder-coat finish that’s made to last and they accommodate the factory mass air sensors and a replacement silicone air injection hose. The oversized cone shaped air filters can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Product Features:
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-10852)

Magnum FORCE Cold Air Intake: Gain up to 10 Horsepower! Oiled Air Filter For Maximum Airflow

from

$681.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 60% cfm Flow Gain
  • Improved Throttle Response
See More

2007 BMW M5 Performance Air Intake Kits

Maybe you’re in the middle of a full rebuild of that 2007 BMW M5. Maybe you just need a couple of Performance Air Intake Kits. Either way, Advance Auto Parts has 2 different Performance Air Intake Kits in our inventory ranging from $599.99 to $730.99. That means you can find the exact parts or products you need to keep that 2007 BMW M5 running smoothly.

Performance Air Intake Kits are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 2007 BMW M5. K&N and aFe POWER are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Performance Air Intake Kits for your 2007 BMW M5, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Performance Air Intake Kits to keep your 2007 BMW M5 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Performance Air Intake Kits Brands To Make Your 2007 BMW M5 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2007 BMW M5 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Air Intake Kits make up Advance Auto Parts’ inventory, and all are ready to help make your M5 the best it can be. Be sure to browse some of our top Performance Air Intake Kits brands and parts.

FAQs for 2007 BMW M5 Performance Air Intake Kits

What are the most purchased Performance Air Intake Kits for the 2007 BMW M5?

Out of 2 Performance Air Intake Kits for the 2007 BMW M5, the most popular in our inventory are:
Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter
from $599.99
This product is not rated
Cold Air Intake: Adds Up To 21 Horsepower, With Million Mile Air Filter
Engine Cold Air Intakes
Magnum FORCE Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow
from $730.99
This product is not rated
Magnum FORCE Cold Air Intake: Gain up to 28 Horsepower! Oiled Air Filter For Maximum Airflow
Engine Cold Air Intakes