2007 BMW 530i Engine Parts

Essential Engine Parts for 2007 BMW 530is

Febi – Chain Tensioner Pist (Part No.A517091572FEB)

Chain Tensioner Pist

from

$32.04
Chain Tensioner Pist

APA/URO Parts – Fuel Sender Seal (Part No.E2050269587APA)

Fuel Sender Seal

from

$15.77
Fuel Sender Seal

Felpro – Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set (Part No.OS 30747 R)

Oil Pan Gasket Set: PermaDry Molded Rubber, 1 Piece Set

from

$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
  • OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
  • ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
See More

Kolbenschmidt – Main Bearing Set (Part No.A20101807058KS)

Main Bearing Set

from

$78.50
KS crankshaft main bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS main bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:
  • Original Equipment Manufacturer
  • Maximum Load-Bearing Capacity
  • Low Wear and Friction
  • Advanced Surface Coatings
See More

Febi – Timing Guide Rail (Part No.A504072685FEB)

Timing Guide Rail

from

$30.02
Timing Guide Rail

Febi – Oil Filler Cap (Part No.A61401862852FEB)

Oil Filler Cap

from

$16.86
The Febi Oil FIller cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Elring – Camshaft Adjuster Ga (Part No.A8012412872ELR)

Camshaft Adjuster Ga

from

$19.55
Camshaft Adjuster Ga

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26656 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$101.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
See More

Victor Reinz – Engine Crankshaft Seal (Part No.81-17404-10)

Engine Crankshaft Seal

from

$13.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Rein – Aluminum Bolt Kit (Part No.HWK0003)

Aluminum Bolt Kit

from

$49.99
Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:
  • Includes all the bolts needed to complete the job.
  • Comes with torque specs to make sure each bolt is properly tighten
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Aluminum bolts are torque to yield and must be replaced once they are released.
See More

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Rear Sump, 7 Quart (Part No.264-396)

Engine Oil Pan: Direct Fit, Aluminum, Rear Sump, 7 Quart

from

$633.99
Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this engine oil pan is made to match the original pan on specific vehicles.
  • Complete assembly – includes replacement pan and drain plugs to match original components.
  • Durable design – high-strength coating prevents future corrosion
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Harmonic Balancer Assembly (Part No.594-338)

Harmonic Balancer Assembly

from

$496.99
This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:
  • Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement.
  • Durable construction – stringent specifications and careful construction help ensure longevity.
  • Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Elring – Access Cover Plate (Part No.A1025455179ELR)

Access Cover Plate

from

$37.05
Access Cover Plate

National – Multi Purpose Seal (Part No.223010)

Multi Purpose Seal

from

$14.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Kolbenschmidt – KS Rod Bearing Set (Part No.A2030848162KS)

KS Rod Bearing Set

from

$208.46
KS rod bearing sets provide maximum load-bearing capacity, anti-seize and low wear and friction. KS rod bearing sets are manufactured with aluminum-tin sliding material and the innovative aluminum-zinc-bismuth alloy in which bismuth replaces lead. From the strands continuously cast on site, strip is generated in defined and coordinated rolling and annealing operations for subsequent cladding. The various steel-aluminum composites are finally produced by roll bonding. Innovative coatings also ensure optimal running-in behavior and low-wear continuous running. The spectrum of possible surface coatings at KS Gleitlager extends from galvanic films deposited electro-chemically and sputter layers applied electro-physically in a high vacuum, to synthetic antifriction coatings.

Product Features:
  • Original Equipment Manufacturer
  • Maximum Load-Bearing Capacity
  • Low Wear and Friction
  • Advanced Surface Coatings
See More

FAE – Engine Coolant Temperature Sensor (Part No.C6020168981FAE)

Engine Coolant Temperature Sensor

from

$27.38
The FAE Engine Coolant Temperature Sensor is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest – Engine Variable Valve Timing (VVT) Solenoid (Part No.VV1107)

Engine Variable Valve Timing (VVT) Solenoid

from

$136.05
Intermotor is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor is the import leader by design.

Product Features:
  • Direct-fit OE replacement effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency
  • Anodized steel componentry limit sticking during sludge buildup to outlast any other aftermarket solenoid available
  • OE-match sprocket engineering ensures stable VVT system operation, resulting in less correction from the powertrain control module to maintain the commanded camshaft angle
  • Premium O-rings and gaskets properly prevent premature oil leaks, where applicable
  • Undergoes extensive design process and 100% end-of-line testing to meet or exceed OE performance
  • With more than 200 part numbers and counting, our line of VVT components supplies the aftermarket-leading coverage that today’s service professionals demand
See More

Rein – Screw Set (Part No.Y2005408158RIN)

Screw Set

from

$27.46
Screw Set

Febi – Rocker Arm (Part No.A404015010FEB)

Rocker Arm

from

$35.06
Rocker Arm

WSO – Crank Position Senso (Part No.A2255124139WSO)

Crank Position Senso

from

$83.09
Crank Position Senso

Rein – BREATHER VALVE (Part No.ABH0334)

BREATHER VALVE

from

$34.99
BREATHER VALVE

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26772)

O-Ring & Gasket A/C System Seal Kit

from

$27.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • Application specific
  • SUV and rear air applications
See More

ACM – Air Conditioning O-Ring (Part No.R1150274121ACM)

Air Conditioning O-Ring

from

$2.16
ACM is a supplier of Original Equipment quality climate control products.
See More

Rein – Expansion Tank Kit (Part No.EPK0015)

Expansion Tank Kit

from

$66.99
Rein Automotive OE quality expansion tank kits, install, fit and perform the way the original manufacturer intended. These tanks are designed to match or exceed the OE materials used and are produced from virgin plastic with no regrind to prevent cracking from heat cycles and ensure the plastic is durable and will have a long service life

Product Features:
  • Includes sensor (if applicable) and Cap
  • Produced from virgin plastic meeting/exceeding OE specifications and ensuring long life
  • Resistant to cracking and wear from heat cycles preventing coolant loss
  • Direct fitment allows easy installation
See More

INA – Camshaft Follower (Part No.A4010139735INA)

Camshaft Follower

from

$24.98
Camshaft Follower

WSO – Camshaft Position Se (Part No.A4015250085WSO)

Camshaft Position Se

from

$69.75
Camshaft Position Se

Elring – Oil Level Sender O-R (Part No.A6081174889ELR)

Oil Level Sender O-R

from

$9.11
Oil Level Sender O-R

Elring – Oil Level Sender O-R (Part No.A6081319324ELR)

Oil Level Sender O-R

from

$8.27
Oil Level Sender O-R

Upgrade your 2007 BMW 530i with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2007 BMW 530i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Engine Parts are key to keeping your 530i functioning at its best. At Advance Auto Parts, we offer a wide selection of 111 Engine Parts for the 2007 BMW 530i, designed to meet your needs without breaking the bank. From Valve Cover and Cylinder Head replacements to Engine Timing Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2007 BMW 530i at great prices. Our Engine Parts inventory for this model ranges from just $2.16 to $874.99, with an average price of $122.88. Our 111 Engine Parts in stock come from 39 trusted brands, so you’re sure to find the right part for your 2007 BMW 530i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2007 BMW 530i, we stock popular OEM and aftermarket Engine Parts from top names like Dorman, and more. Dorman Engine Parts start at just $34.99 and boast an impressive 4 stars average rating from customers. With 9 customer reviews and counting, our 2007 BMW 530i Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2007 BMW 530i is always ready to roll. We’re committed to providing you with everything you need to keep your 530i in top shape, all in one place. Start shopping confidently below for your 2007 BMW 530i!

Best-Selling Valve Cover and Cylinder Heads for 2007 BMW 530is

Enhance the driving experience in your BMW with 14 quality Valve Cover and Cylinder Head components, starting at $3.14.

Carquest Premium – Cylinder Head Temperature Sensor with Washer (Part No.WTC1071)

Cylinder Head Temperature Sensor with Washer

from

$19.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

TRW – Valve Keeper (Part No.A4070774061TRW)

Valve Keeper

from

$3.14
Valve Keeper

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26656 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$101.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
See More

Elring – Cylinder Head Bolt Set (Part No.A3031283724ELR)

Cylinder Head Bolt Set

from

$60.10
Cylinder Head Bolt Set

INA – Rocker Arm (Part No.A4040284934INA)

Rocker Arm

from

$27.86
Rocker Arm

Dorman – Eccentric Shaft Actuator (Part No.916-885)

Eccentric Shaft Actuator

from

$444.99
This engine variable valve lift eccentric shaft actuator is designed to match the appearance and function of the original actuator on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this engine variable valve lift eccentric shaft actuator is made to match the fit and performance of the original actuator on specific vehicle applications
  • Restores functionality – built to restore the appearance and function of an actuator that has failed due to damage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26766 PT)

Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts

from

$196.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • PROPRIETARY COATING — Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
  • UNIQUE COMBUSTION SEAL — Exclusive LaserWeld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
  • MULTI-LAYERED STEEL CONSTRUCTION — Multiple layers of stainless steel maintain sealing stress and accommodate head lift
  • SUPERIOR SEAL — Precise embossed sealing beads at all vital areas to eliminate leak paths
  • HANDLES EXTREME ENGINE CONDITIONS — Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
See More

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-36120-00)

Engine Cylinder Head Gasket

from

$95.99
For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Febi – Valve Cover Screw Se (Part No.A3165286715FEB)

Valve Cover Screw Se

from

$71.22
Valve Cover Screw Se

Mahle – Valve Cover Bolt Kit (Part No.A31661197212MAH)

Valve Cover Bolt Kit

from

$67.02
Valve Cover Bolt Kit

Elring – Access Cover Plate (Part No.A1025455179ELR)

Access Cover Plate

from

$37.05
Access Cover Plate

TRW – TRW Exhaust Valve (Part No.A4050284928TRW)

TRW Exhaust Valve

from

$29.51
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

TRW – TRW Intake Valve (Part No.A4060285112TRW)

TRW Intake Valve

from

$27.54
TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:
  • OE Quality
  • Optimized for strength
  • Heat and corrosion resistant
  • Chromium plated or nitrided
  • Stem optimized to resist wear
See More

KS – Valve Keeper (Part No.A407084736KS)

Valve Keeper

from

$3.14
Valve Keeper

Most Popular 2007 BMW 530i Engine Timing Parts

Customize your BMW with 15 Engine Timing Parts products like Engine Variable Timing Solenoids, Timing Chain Tensioners, and Timing Cam Gears, all priced under $717.99.

Dorman – Variable Valve Timing Solenoid (Part No.917-241)

Variable Valve Timing Solenoid

from

$119.99
This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:
  • Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
  • Durable construction – this part is made from quality materials to ensure a long service life.
  • Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
  • Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance
See More

Carquest – Engine Variable Valve Timing (VVT) Solenoid (Part No.VV1107)

Engine Variable Valve Timing (VVT) Solenoid

from

$136.05
Intermotor is a complete engine management import line that includes ignition and electrical relays, switches and sensors with a concentration on high technology categories such as computerized engine controls, fuel injection, and emission controls with coverage for every part number with an import nameplate. Intermotor parts are unrivalled for quality, original fit, form, function, and coverage providing a genuine import part in every box. Intermotor is the import leader by design.

Product Features:
  • Direct-fit OE replacement effectively restores engine horsepower and torque curves while reducing emissions and improving vehicle efficiency
  • Anodized steel componentry limit sticking during sludge buildup to outlast any other aftermarket solenoid available
  • OE-match sprocket engineering ensures stable VVT system operation, resulting in less correction from the powertrain control module to maintain the commanded camshaft angle
  • Premium O-rings and gaskets properly prevent premature oil leaks, where applicable
  • Undergoes extensive design process and 100% end-of-line testing to meet or exceed OE performance
  • With more than 200 part numbers and counting, our line of VVT components supplies the aftermarket-leading coverage that today’s service professionals demand
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1011)

Engine Variable Valve Timing (VVT) Solenoid

from

$135.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Eccentric Shaft Position Sensor (Part No.BAC1086)

Engine Variable Valve Timing (VVT) Eccentric Shaft Position Sensor

from

$406.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Engine Variable Valve Timing (VVT) Sprocket (Part No.VVC1485)

Engine Variable Valve Timing (VVT) Sprocket

from

$717.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

VDO – Eccentric Shaft Sens (Part No.A5093418605VDO)

Eccentric Shaft Sens

from

$505.77
Eccentric Shaft Sens

VDO – Camshaft Adjuster (Part No.A5087409847VDO)

Camshaft Adjuster

from

$362.63
Camshaft Adjuster

Dorman – Eccentric Shaft Sensor (Part No.917-030)

Eccentric Shaft Sensor

from

$358.99
This engine variable valve timing (VVT) eccentric shaft position sensor is designed to match the fit and function of the original sensor on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Upgraded design – this replacement VVT eccentric shaft sensor features ultrasonic welds to increase durability.
  • Failure-resistant construction – made to prevent common failure from oil intrusion in original equipment spot welds.
  • Application specific – made for certain BMW model years
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

Worldpac – TIMING SPROCKET (Part No.A51984134104APA)

TIMING SPROCKET

from

$357.58
TIMING SPROCKET

Autopart International Inc – VARIABLE TIMING SPRO (Part No.A54002506634API)

VARIABLE TIMING SPRO

from

$222.44
VARIABLE TIMING SPRO

Autopart International Inc – Var. Valve Lift Ecct (Part No.A54122973941API)

Var. Valve Lift Ecct

from

$207.52
Var. Valve Lift Ecct

Iwis – Timing Chain (Part No.A5100659723IWI)

Timing Chain

from

$126.99
Timing Chain

NTK – EN VAR TIME SOLENOID (Part No.VV0040)

EN VAR TIME SOLENOID

from

$125.99
NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.

Product Features:
  • NTK’s Variable Valve Timing Solenoids are manufactured to meet and/or exceed OE fit, form and function to ensure proper VVT operation.
  • The NTK VVT solenoids include a hard-coat anodized spool valve to prevent corrosion and increase service life.
  • The NTK VVT solenoids include precision-wound, coated-copper windings to increase solenoid longevity.
  • The NTK VVT solenoids are manufactured with a high strength thermoplastic that is resistant to temperature, moisture, and chemicals.
  • The NTK VVT Solenoids are manufactured to precise OE valve body dimensions and utilizes fluorocarbon O-rings to help prevent oil leakage.
  • The NTK VVT Solenoids are 100% tested and inspected to ensure consistent quality with end of production tested in oil to be sure the valve is primed and will work properly upon installation.
See More

Worldpac – TIMING CHAIN TENSION (Part No.A5110377233BBR)

TIMING CHAIN TENSION

from

$110.19
TIMING CHAIN TENSION

BBR Automotive – Timing Chain Guide R (Part No.A5040419749BBR)

Timing Chain Guide R

from

$30.25
Timing Chain Guide R

Top Picks for 2007 BMW 530i Engine Gaskets and Seals

Upgrade BMW 530is with top-quality Engine Gaskets and Seals parts, including 20 OEM and aftermarket selections for your 2007 model.

MAHLE Original – Engine Valve Cover Gasket Set (Part No.VS50533)

Engine Valve Cover Gasket Set

from

$67.99
MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Valve cover gasket set contains all the gaskets required – may also contain spark plug tube seals and grommets if necessary.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

MAHLE Original – Engine Oil Pan Gasket Set (Part No.OS32357)

Engine Oil Pan Gasket Set

from

$54.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • MAHLE gaskets is the leader in Domestic, Asian and European applications
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Elring – Eccentric Shaft Sens (Part No.A8017424034ELR)

Eccentric Shaft Sens

from

$9.02
Eccentric Shaft Sens

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50860 R)

Engine Valve Cover Gasket Set

from

$56.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Felpro – OIL PAN GASKET SET (Part No.OS 30869 R)

OIL PAN GASKET SET

from

$42.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
  • SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
See More

Elring – Oil Level Sender O-R (Part No.A6081174889ELR)

Oil Level Sender O-R

from

$9.11
Oil Level Sender O-R

Elring – Oil Pan Gasket (Part No.A6130248083ELR)

Oil Pan Gasket

from

$76.99
Oil Pan Gasket

Elring – Valve Cover Gasket Set (Part No.A8029306071ELR)

Valve Cover Gasket Set

from

$69.67
WARNING: This item cannot be returned for a replacement or refund if opened! Elring valve cover gaskets are engineered to meet the specific requirements of the installation site. Manufactured from high-quality materials, the gaskets are designed to provide excellent performance and reliability. Elring valve cover gaskets feature specially designed sealing lips. The overall layout of these lips is of particular importance when it comes to ensuring a high-quality seal and long service life. The same applies to the selection of premium-quality raw materials.

Product Features:
  • High-quality design and engineering for perfect performance
  • Premium materials and high-precision curing processes for perfect shore hardness and superior reliability
  • Majority of Elring valve cover gaskets sold as kits for improved convenience and efficient installation
See More

Beck/Arnley – Valve Cover Gasket Set (Part No.036-1979)

Valve Cover Gasket Set

from

$58.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • Includes all necessary gaskets and seals needed for a complete installation
  • Made with high quality materials for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Victor Reinz – Molded Rubber & Steel Valve Cover Gasket Set: Direct Fit, 2 Pieces (Part No.15-37289-01)

Molded Rubber & Steel Valve Cover Gasket Set: Direct Fit, 2 Pieces

from

$65.99
Oil drops on the driveway are a distant memory thanks to sophisticated engine valve cover and gasket designs. Victor Reinz is at the forefront of engineering the latest sealing technology. Although the primary task of valve cover gaskets is to seal oil and oil spray, they must withstand high temperatures brought on by nearby exhaust manifolds, exhaust crossovers in the cylinder heads, and EGR systems. Victor Reinz valve cover gaskets deliver the quality materials you demand. Where appropriate, Victor Reinz valve cover gaskets are designed with compression limiters to prevent over-torquing, splitting, or the need to retorque.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds original equipment specifications.
  • Zero engine leakage for late model vehicles.
See More

Payen – Oil Pan Gasket (Part No.A6130248083PAY)

Oil Pan Gasket

from

$56.71
Oil Pan Gasket

Victor Reinz – Engine Oil Pan Gasket (Part No.71-38669-00)

Engine Oil Pan Gasket

from

$54.99
Built to meet or exceed the standards of original equipment manufacturers around the world and avoid comebacks Victor Reinz oil pan gaskets deliver the seal that prevents drops on the driveway. Victor Reinz engineers select the best designs and materials for the specific application. The level of sophistication in oil pan gasket form and function has jumped greatly in recent years, with the gasket often being an integral part of the manufacturers efforts to control engine noise, vibration, and harshness (NVH). Only a company with innovative gasket technology can supply the right gasket for every application, new or old.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Corteco – Valve Stem Seal Kit (Part No.A8069379889CFW)

Valve Stem Seal Kit

from

$38.44
Valve Stem Seal Kit

Elring – Water Pipe Gasket (Part No.G2048248499ELR)

Water Pipe Gasket

from

$24.45
Water Pipe Gasket

Elring – Camshaft Adjuster Ga (Part No.A8012412872ELR)

Camshaft Adjuster Ga

from

$19.55
Camshaft Adjuster Ga

APA/URO Parts – Fuel Sender Seal (Part No.E2050269587APA)

Fuel Sender Seal

from

$15.77
Fuel Sender Seal

Autopart International Inc – Oil Cooler Seal (Part No.A63102060754API)

Oil Cooler Seal

from

$14.44
Oil Cooler Seal

APA/URO Parts – Engine Cooling Auxiliary Fan Switch Seal (Part No.G5031449796APA)

Engine Cooling Auxiliary Fan Switch Seal

from

$3.31
The APA/URO Engine Cooling Fan Switch Seal is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Original Equipment – Oil Cooler Seal (Part No.A631023912OEA)

Oil Cooler Seal

from

$2.92
Oil Cooler Seal

ACM – Air Conditioning O-Ring (Part No.R1150274121ACM)

Air Conditioning O-Ring

from

$2.16
ACM is a supplier of Original Equipment quality climate control products.
See More

In-Demand Camshafts for 2007 BMW 530is

Select from 12 premium Camshafts parts for your 2007 BMW 530i, with prices ranging from $12.49 to $153.33.

Carquest Premium – Camshaft Sensor (Part No.CSC1112)

Camshaft Sensor

from

$103.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:
  • Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
  • Manufactured in an anti-static environment to ensure reliability and stability.
  • Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
  • Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
See More

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

A/C Compressor Cut-Out Switch Harness Connector

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

ABS Wheel Speed Sensor Connector

from

$12.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Delphi – Engine Camshaft Position Sensor (Part No.SS11123)

Engine Camshaft Position Sensor

from

$122.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.

Product Features:
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
  • Designed digital output for maximum signal to noise ratio
  • All parts used in the manufacture process are Delphi validated
  • Not impacted by temperature changes and provide robust, long-lasting sensor protection
See More

WSO – Camshaft Position Se (Part No.A4015250085WSO)

Camshaft Position Se

from

$69.75
Camshaft Position Se

National – Shaft Repair Sleeve (Part No.99114)

Shaft Repair Sleeve

from

$27.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Camshaft Position Sensor (Part No.907-700)

Camshaft Position Sensor

from

$75.99
This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles.
  • Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Worldpac – CAMSHAFT POSITION SE (Part No.A4015250085DEL)

CAMSHAFT POSITION SE

from

$153.33
CAMSHAFT POSITION SE

Worldpac – CAMSHAFT POSITION SE (Part No.A4015250085BRM)

CAMSHAFT POSITION SE

from

$153.33
CAMSHAFT POSITION SE

VDO – Camshaft Position Sensor (Part No.A4015250085VDO)

Camshaft Position Sensor

from

$117.86
Camshaft Position Sensor

INA – Camshaft Follower (Part No.A4010284626INA)

Camshaft Follower

from

$26.12
Camshaft Follower

INA – Camshaft Follower (Part No.A4010381419INA)

Camshaft Follower

from

$18.81
Camshaft Follower

Most Sold 2007 BMW 530i Engine Mounts

Explore our best-selling BMW parts for the 2007 530i among 9 OEM and aftermarket options starting from $18.99.

Anchor – Engine Mount: Front Right, 1 Piece (Part No.9719)

Engine Mount: Front Right, 1 Piece

from

$133.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to BMW 04-10;. Please verify your application.

Product Features:
  • MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
  • MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
  • HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
  • SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
  • HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
  • For Years: 2004-2010
  • Weight approx: 3 Lbs
  • HYDRAULIC
See More

Hutchinson – Hutchinson Engine Mount (Part No.A7000177037HUT)

Hutchinson Engine Mount

from

$147.81
The Hutchinson Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce engine vibration and noise.
See More

Hutchinson – Hutchinson Engine Mount (Part No.A7000177038HUT)

Hutchinson Engine Mount

from

$138.13
The Hutchinson Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Designed to reduce engine vibration and noise.
See More

Rein – Engine Mount Kit (Part No.AVK0041)

Engine Mount Kit

from

$109.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
  • Produced by an Original Equipment supplier
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
  • High corrosion resistance
See More

Rein – Engine Mount Kit (Part No.AVK0040)

Engine Mount Kit

from

$101.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
  • Produced by an Original Equipment supplier
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
  • High corrosion resistance
See More

Rein – Engine Mount (Part No.AVE0040R)

Engine Mount

from

$94.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
  • Produced by an Original Equipment supplier
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
  • High corrosion resistance
See More

Rein – Engine Mount (Part No.AVE0041)

Engine Mount

from

$90.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
  • Produced by an Original Equipment supplier
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
  • High corrosion resistance
See More

Rein – Screw Set (Part No.Y2005408158RIN)

Screw Set

from

$27.46
Screw Set

Rein – Aluminum Bolt Kit (Part No.HWK0033)

Aluminum Bolt Kit

from

$18.99
Rein OE quality bolts kits fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original bolts are identical to OEM. Supplied with all the necessary bolts and torque specs to ensure that the job is done right.

Product Features:
  • Includes all the bolts needed to complete the job.
  • Comes with torque specs to make sure each bolt is properly tighten
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Aluminum bolts are torque to yield and must be replaced once they are released.
See More

Top-Rated Engine Parts Brands For Your 2007 BMW 530i

Shop for the best-rated brands offering Engine Parts and other products for your 2007 BMW 530is. Below you’ll find some of our best rated Engine Parts from Dorman, and more. Engine Parts from these brands that fit a 2007 530i start at just $34.99 and are rated as high as 4 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 2007 BMW 530i Engine Parts

When it comes to maintaining or upgrading your 2007 BMW 530i, using quality Engine Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Engine Parts, specifically designed for the 2007 BMW 530i. With over 8 Dorman brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $34.99, with an average price of just $320.87. Plus, with over 6 customer reviews and an average rating of 4 stars, you can trust that our Dorman Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Crankshaft Position Sensor
from
$96.99
This product is not rated

Crankshaft Position Sensor

“”

Camshaft Position Sensor
from
$75.99
This product is not rated

Camshaft Position Sensor

“”

Engine Oil Pan: Direct Fit, Aluminum, Rear Sump, 7 Quart
from
$874.99
This product is not rated

Engine Oil Pan: Direct Fit, Aluminum, Rear Sump, 7 Quart

“”

FAQs for 2007 BMW 530i Engine Parts

Which Engine Parts are best-sellers for 2007 BMW 530is?

Out of 111 Engine Parts that fit 2007 BMW 530is, the following parts are the top sellers:

What’s the price range for 2007 BMW 530i Engine Parts?

Engine Part prices for the 2007 BMW 530i start at $2.16 and go up to $874.99 for the most premium parts.

What’s the average price of a Engine Part for a 2007 BMW 530i?

The average price for Engine Parts for the 2007 BMW 530i is $122.88. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other BMW 530i model years?

Yes, we currently carry Engine Parts for 20 model years of BMW 530is between 1975 and 2024. Engine Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2006, 2005, and 2004.

What are the cheapest Engine Parts for my 2007 BMW 530i?

The cheapest 2007 BMW 530i Engine Parts we carry in stock are:

What are the top-rated Engine Parts that fit the 2007 BMW 530i?

Out of 9 reviews by customers, our 2007 BMW 530i Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2007 BMW 530i and their top-rated products:

Can I get help with 2007 BMW 530i Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Engine Parts and more.

What is your return policy for BMW 530i Engine Parts?

Advance Auto Parts keeps returns simple. For new BMW 530i Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.