2007 Audi S4 Steering and Chassis Parts
More 2007 Audi S4 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2007 Audi S4, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2007 Audi S4 Steering and Chassis Parts
Delphi – Tie Rod End (Part No.M3010324832DEL)
from
$39.65
Tie Rod End
Lemfoerder – Tie Rod End (Part No.M3010525590LEM)
from
$112.53
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
CRP – Steering Rack Boot Clamp (Part No.M1011452365CRP)
from
$5.47
The CRP Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Febi – Steering Rack Boot Clamp (Part No.M1011755121FEB)
from
$3.48
The Febi Steering Rack Boot Clamp is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Driveworks – Steering Tie Rod End (Part No.DW-ES3646)
from
$24.29
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Cardone – Power Steering Pump (Part No.21-5190)
from
$191.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone New – Power Steering Pump (Part No.96-5352)
from
$239.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
Rein – Sway Bar Link Kit (Part No.SCL0273R)
from
$34.99
Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.
See More
Delphi – Suspension Stabilizer Bar Link (Part No.L1030184686DEL)
from
$44.14
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Product Features:
See More
Product Features:
- Delphi sway bar links are fatigue tested to avoid failure
- Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
- Delphi machines to micron tolerances to guarantee durability and smooth joint operation
- Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
Rare Parts – Tie Rod Assbly (Part No.RP29140)
from
$171.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod Assembly (Part No.RP29410)
from
$131.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Complete with inner and outer tie rod ends
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Sway Bar Bushing (Part No.RP19236)
from
$54.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Lemfoerder – Sway Bar Bushing (Part No.L1050152211LEM)
from
$6.10
The Lemfoerder Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Delphi – Suspension Stabilizer Bar Link (Part No.L1030184687DEL)
from
$43.99
Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
Product Features:
See More
Product Features:
- Delphi sway bar links are fatigue tested to avoid failure
- Sway bar links manufactured with ultrasonic molding to help prevent future weld breakage
- Delphi machines to micron tolerances to guarantee durability and smooth joint operation
- Anti-Corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
Rare Parts – Sway Bar Link (Part No.RP19500)
from
$92.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Whiteline – Control Arm Upper Bushing (Part No.KCA420)
from
$100.99
Whiteline camber kits provide the ability to fine tune camber settings for optimum tyre contact resulting in improved vehicle handling and increased tyre life. This kit is supplied with dual offset Whiteline synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability which help maintain preferred alignment settings as well as providing enhanced steering response.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Rein – Power Steering Rack Boot Kit (Part No.BKK0202)
from
$12.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Rein boot kits come with all the needed hardware and components for the complete repair.
- All components are manufactured to strict engineering standards/specifications in materials and tolerances
- Rein also offers a full line of individual boots.
- Matches original equipment design specifications
Rein – Power Steering Rack Boot Kit (Part No.BKK0095R)
from
$21.99
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.
See More
Carquest Premium – Pressure Hose Assembly (Part No.40230)
from
$79.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
Omega – P/S Pressure Hose (Part No.M2015127052OME)
from
$504.90
To ensure the highest level of performance and long service life, Omega power steering hose assemblies are built and tested to the most stringent specifications in the industry, meeting or exceeding all OEM standards.
Product Features:
See More
Product Features:
- OEM Style replacement assembly is designed to fit your car exactly like the unit you are replacing.
- All o-rings, sealing washers, adapters and mounting hardware necessary for installation are included.
Whiteline – Radius Arm Lower Bushing (Part No.KCA422)
from
$90.99
Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.
Product Features:
See More
Product Features:
- Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
- Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Rare Parts – Conrol Arm W/Bj (Part No.RP11281)
from
$98.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
Dorman – Suspension Control Arm (Part No.520-976)
from
$96.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Control Arm and Ball Joint Assembly (Part No.RK622786)
from
$304.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.522-111)
from
$96.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Control Arm and Ball Joint Assembly (Part No.RK80525)
from
$69.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Popular 2007 Audi S4 Steering and Chassis Parts Categories
2007 Audi S4 Steering and Chassis Parts
You count on your 2007 Audi S4 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 40 Steering and Chassis Parts ranging in price from $3.48 to $424.99, you’re sure to find everything you need for your 2007 Audi S4.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 15 different brands like Cardone, Driveworks, and Moog. 2007 Audi S4 Steering and Chassis Parts start as low as $3.48!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 232 extensive product reviews on 2007 Audi S4 Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2007 Audi S4 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2007 Audi S4
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2007 Audi S4 running right for years to come. In our inventory you’ll find brands like Cardone, Driveworks, Moog, and even more.
Popular Dorman Steering and Chassis Parts
You’ll find popular Dorman brand products across Ball Joints. All are waiting to get your 2007 Audi S4 back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 2007 Audi S4, and some of our most reviewed Cardone parts include:
FAQs for 2007 Audi S4 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2007 Audi S4?
Out of 40 Steering and Chassis Parts for the 2007 Audi S4, the most popular in our inventory are:
