2006 Volkswagen Touareg Drivetrains

With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot.

Product Features:

• For every specific application a boot kit to the OES standard
• Reliable protection against damp and dirt
• Optimum sealing and abrasion resistance
• Manufactured according to DIN EN ISO 9001:2000

With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination

Product Features:

• Help restore the vehicle to like-new condition
• Constructed of high strength OE materials
• Resists environmental contamination
• Protects the CV joint from premature failure

GKN Drivetech (Lobro) manufactures a replacement Axle Assembly that is optimized for weight, noise, vibration, harshness (NVH), steering and suspension performance.

Product Features:

• OEM Quality and a Direct fit Replacement
• Provides exceptional reliability.
• Improved space utilization through power unit and gearbox repackaging potential.
• Lighter weight provides improved fuel efficiency.
• Better driving characteristics and comfort
• Optimum power delivery for peak vehicles

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUDI 07-09; PORSCHE 03-10; VW 04-10;. Please verify your application.

Product Features:

• MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
• HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
• READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
• For Years: 2003-2010
• Weight approx: 2 Lbs
• BEARING ID / BORE: 1.1811 INCH / 30 MM
• CENTERLINE: 2.80 INCH / 71 MM
• MOUNT WIDTH: 2.50 INCH / 64 MM
• STYLE: ROUND FRAME
• WITH ELEVATED MOUNTING PLATFORM

This drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this drive shaft center bearing is designed to match the fit and function of the original bearing on specified vehicles
• Restores functionality – this bearing is made to fit and fully restore part functionality after the original bearing fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Product Features:

• High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks
• Long-life friction modifiers and premium base oils help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
• Enhanced cleaning additives help reduce varnish formation and keep the transmission running properly longer
• Engineered with a unique blend of viscosity modifiers and base oils to provide better oil flow at low temperatures and greater film protection at higher temperatures

Trans Case Input Sft

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Rein Automotive OE quality transfer case actuators are made to factory specifications ensuring proper fit, form and function. The transfer case actuator is a small motor attached to the case that proportions engine power to the front and rear differentials. High quality electronics and nylon gears are used to ensure a long service life. Our quality transfer case actuators aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE quality component.

Product Features:

• Rein OE quality transfer case actuators are the perfect replacement to meet the high demands placed on 4WD/AWD systems.
• Direct OE replacement including mounting hardware.
• Designed to engage or disengage the four wheel drive system as selected by the ECU of the vehicle.
• Manufactured using high quality materials.
• Restores functionality of 4WD/AWD system.

CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.

Product Features:

• All motors are 100% torque tested to ensure strength for proper gear engagement.
• Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
• Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
• Motor magnets are 100% recharged for superior performance and reliability.
• Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.

Multi Purpose Seal

SPIDAN and LOBRO joint kits contain all the individual parts needed for professional repairs: joint, boot, boot circlips, tightening straps, bolts, nuts, spacers, etc. GKN axle boots are specifically developed for the various joints. Their accurate fit guarantees optimum sealing and maximum wear resistance.

Product Features:

• OEM Quality and a Direct fit Replacement
• Provides exceptional reliability.
• Lighter weight provides improved fuel efficiency.
• Better driving characteristics and comfort

This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
• Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles
• Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:

• OE quality, fit and performance
• High quality rubber
• Reinforced with advanced materials
• Excellent vibration control

Product Features:

• Brand may vary by location

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool
• Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Multi Purpose Sel Rg

Trans. Case Output Sft Seal

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

• Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
• 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
• Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
• Serviceable construction – non-staked universal joints are designed for future serviceability

Driveshaft

Each GKN Driveline premium prop-shaft is unique in its use, tailored, tuned and harmonized to match the precise demands of its application. Prop-shafts consist of shafts, joints and bearing, and transmit torque between gearbox and axle in rear-wheel drive vehicles and from the transfer box to the front and rear axles in all-wheel drive vehicles. Each prop-shaft – a unique, engineered product Strength, stiffness, precision balance and low mass are the essential properties of prop-shafts in ensuring durability and minimum levels of Noise Vibration Harshness (NVH). Shaft joints and couplings also have to accommodate severe service loads, high angles and apparent changes in path length, due to relative displacement between axles and the gearbox in passenger cars, and the high shock loads commonplace in all-terrain vehicles. The crash-optimized shaft An innovation in vehicle safety engineering, the crash optimized shaft provides predictable energy absorption when required, or can be tuned to a required combination of load and displacement. For example, the tube can be designed to absorb a specific amount of impact load before collapsing to a predetermined length. Shafts can be produced in aluminum and composite fibre to provide energy absorbing characteristics, and CV joints designed with specific energy absorption features. GKN Driveline’s unique capability and innovative lead in crash optimized shafts ensures a safer and more comfortable driving experience

Product Features:

• Weight reduction through optimized material and joint selection
• NVH analysis and tuning
• Optimized high speed durability
• Torsional stiffness
• Crash compliance

Each GKN Driveline premium prop-shaft is unique in its use, tailored, tuned and harmonized to match the precise demands of its application. Prop-shafts consist of shafts, joints and bearing, and transmit torque between gearbox and axle in rear-wheel drive vehicles and from the transfer box to the front and rear axles in all-wheel drive vehicles. Each prop-shaft – a unique, engineered product Strength, stiffness, precision balance and low mass are the essential properties of prop-shafts in ensuring durability and minimum levels of Noise Vibration Harshness (NVH). Shaft joints and couplings also have to accommodate severe service loads, high angles and apparent changes in path length, due to relative displacement between axles and the gearbox in passenger cars, and the high shock loads commonplace in all-terrain vehicles. The crash-optimized shaft An innovation in vehicle safety engineering, the crash optimized shaft provides predictable energy absorption when required, or can be tuned to a required combination of load and displacement. For example, the tube can be designed to absorb a specific amount of impact load before collapsing to a predetermined length. Shafts can be produced in aluminum and composite fibre to provide energy absorbing characteristics, and CV joints designed with specific energy absorption features. GKN Driveline’s unique capability and innovative lead in crash optimized shafts ensures a safer and more comfortable driving experience

Product Features:

• Weight reduction through optimized material and joint selection
• NVH analysis and tuning
• Optimized high speed durability
• Torsional stiffness
• Crash compliance

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

• Built to match O.E. form, fit and function.
• 100% NEW universal joints are installed to ensure proper fit and optimal performance.
• All slip yokes are lubricated to prevent premature wear.
• Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.

The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:

• Rear Driveshaft Assembly
• Rear Drive Shaft: Adjustable, OE Fix
• Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
• Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance

CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:

• Built to match O.E. form, fit and function.
• 100% NEW universal joints are installed to ensure proper fit and optimal performance.
• All slip yokes are lubricated to prevent premature wear.
• Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.