2006 Volkswagen Beetle Belts and Hoses

Essential 2006 Volkswagen Beetle Belts and Hoses

Bando – Multi Rib (Serpentine) Belt (Part No.W100027667BAN)

Multi Rib (Serpentine) Belt

from

$13.29
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • OE-Equivalent.
  • Direct fit for easy installation.
  • Resistant against wear, oil and heat.
  • Strong tensile cords limit stretching.
  • Supports higher horsepower loads.
  • Made from high strength synthetic rubber.
See More

Gates – Notched V-Belt: 36.12" Long, 1 Strand, Exact Fit (Part No.9355)

Notched V-Belt: 36.12" Long, 1 Strand, Exact Fit

from

$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38018)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$25.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 65mm Dia., 24.5mm Width, Smooth (Part No.89161)

Serpentine Idler/Tensioner Pulley; Polymer, 65mm Dia., 24.5mm Width, Smooth

from

$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999550A)

Serpentine Belt Tensioner: 1 Piece

from

$152.99
This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Germany for 2009-2014 VW CC,Tiguan,Eos, 2008-2012 GTI, 2008-2010 Passat, 2008-2012 Jetta with 2.0L Gas; 2010-2012 Jetta with 2.0L Diesel/2009-2013 Audi A3; 2008-2012 TT Quattro with 2.0L Gas; 2010-2011 Audit A3 TDI with 2.0L Diesel. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. As with the original tensioner, the part comes equipped with an installation pin and a heavy duty polymer pulley for optimum performance and durability. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • 6K grooved heavy duty thermoplastic pulley for long life
  • Installation instructions included
See More

INA – INA Accessory Belt Tensioner Assembly (Part No.G6001183507INA)

INA Accessory Belt Tensioner Assembly

from

$122.65
The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:
  • OE-Equivalent and a direct fit application
  • High quality precision spring tension assembly
  • OE specified bearing and pulley assembly
  • Durable long life performance
See More

APA/URO Parts – Heater Hose Connecto (Part No.R3036445070APA)

Heater Hose Connecto

from

$13.49
Heater Hose Connecto

Febi – Radiator Coolant Hos (Part No.G2003824011FEB)

Radiator Coolant Hos

from

$10.48
Radiator Coolant Hos

CRP – Hose Clamp (Part No.Y3063860142CRP)

Hose Clamp

from

$2.07
Hose Clamp

Dorman – Coolant Coupling (Part No.902-916)

Coolant Coupling

from

$18.79
This radiator coolant hose connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this radiator coolant hose connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Coolant Hose Connector (Part No.902-913)

Coolant Hose Connector

from

$17.79
This radiator coolant hose connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this radiator coolant hose connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

APA/URO Parts – C Clip Retainer (Part No.G2050240713APA)

C Clip Retainer

from

$1.30
C Clip Retainer

Burgaflex – Radiator Hose (Part No.G2000537142BUR)

Radiator Hose

from

$187.00
Radiator Hose

Rein – Radiator Hose (Part No.CHR0602)

Radiator Hose

from

$122.99
Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:
  • Reduces installation time.
  • No cutting, refitting or adjusting the hose.
  • Prevents leaks and comebacks from reusing old quick connectors and o-rings.
  • Resistant to heat, salt, road debris, oil and other contaminants.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23" Long, 1.25" Diameter (Part No.E73128)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23" Long, 1.25" Diameter

from

$80.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 73 mm Diameter (Part No.900456A)

O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 73 mm Diameter

from

$54.99
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley is produced in Germany and conforms to original equipment material and tolerances specifications and meets performance and durability requirements. The high grade polymer pulley comes pre-assembled to a bracket for ease of installation. Fits Volkswagen applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys. Manufactured by the original equipment supplier of this part
  • Heavy Duty Polymer Pulley
  • Glass Reinforced thermoplastic for optimized dimensional control and running surface durability.
  • Precise dimensional tolerance for smooth operation and long life
  • Service free sealed ball bearing. Molded-in ball bearing for optimal fit and long life
See More

Litens – O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 65 mm Diameter (Part No.900548A)

O.E Quality Idler/Tensioner Pulley Direct Fit, Thermoplastic, 65 mm Diameter

from

$64.99
This Litens pulley is manufactured by the original equipment part supplier to VW. This pulley is produced for serpentine belt routing applications on various 1.9L VW Diesels. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the O.E. part, the replace part is made in France using the O.E. specified materials and design and meets all performance and durability requirements. Replacement of this pulley requires the use of existing mounting hardware. Crosses to OE# 038145276 and others Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:
  • Manufactured by the original equipment part supplier to ensure proper form, fit and performance
  • Heavy Duty Plastic Pulley with close tolerance ball bearing pocket and precision surface control.
  • Installation instructions included.
  • Running surface designed and engineered for proper belt tracking.
  • 65.1mm O.D.; 8.0mm I.D.; 26.0mm width, Smooth running surface for a 6rib belt, high grade polymer construction.
See More

Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 78 mm Diameter (Part No.419-666)

Idler/Tensioner Pulley: Specific Fit, Steel, 78 mm Diameter

from

$44.49
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.

Product Features:
  • Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles
  • Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
  • Application specific – reverse engineered from the original design on certain vehicle years, makes and models
  • Trustworthy quality – backed by team of engineers and quality specialists in the United States
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Poly Rib Belt Serpentine Belt; 36.81 Long, 5 Rib Count (Part No.5050368)

Poly Rib Belt Serpentine Belt; 36.81 Long, 5 Rib Count

from

$22.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 65.5 Long, 6 Rib Count (Part No.5060655)

Poly Rib Belt Serpentine Belt; 65.5 Long, 6 Rib Count

from

$31.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt Serpentine Belt; 43.31 Long, 6 Rib Count (Part No.5060433)

Poly Rib Belt Serpentine Belt; 43.31 Long, 6 Rib Count

from

$25.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K050368)

Micro-V« Serpentine Drive Belt

from

$20.29
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt Serpentine Belt; 40.55 Long, 6 Rib Count (Part No.405K6)

Poly Rib Belt Serpentine Belt; 40.55 Long, 6 Rib Count

from

$20.99
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060420)

Micro-V« Serpentine Drive Belt

from

$25.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt Serpentine Belt; 65.5 Long, 6 Rib Count (Part No.655K6)

Poly Rib Belt Serpentine Belt; 65.5 Long, 6 Rib Count

from

$19.99
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

2006 Volkswagen Beetle Belts and Hoses

You count on your 2006 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 47 Belts and Hoses ranging in price from $1.30 to $189.99, you’re sure to find everything you need for your 2006 Volkswagen Beetle.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 16 different brands like Dayco, Driveworks, and Dorman. 2006 Volkswagen Beetle Belts and Hoses start as low as $1.30!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 430 extensive product reviews on 2006 Volkswagen Beetle Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Coolant Hose Connector with 4.6 stars and Coolant Hose Connector with 5.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 2006 Volkswagen Beetle below to get started!

Top-Rated Belts and Hoses Brands For Your 2006 Volkswagen Beetle

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Dayco, Driveworks, Dorman, and even more.

Popular Litens Belts and Hoses

You’ll find popular Litens brand products across Belt Tensioners and Pulleys. All are waiting to get your 2006 Volkswagen Beetle back on the road. Some of the top-rated Litens products in these categories are:
Serpentine Belt Tensioner: 1 Piece
from $73.99
(1)
Serpentine Belt Tensioner: 1 Piece
Belt Tensioner Assemblies

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 2006 Volkswagen Beetle, and some of our most reviewed Dayco parts include:

FAQs for 2006 Volkswagen Beetle Belts and Hoses

What are the most purchased Belts and Hoses for the 2006 Volkswagen Beetle?

Out of 47 Belts and Hoses for the 2006 Volkswagen Beetle, the most popular in our inventory are:
Poly Rib Belt Serpentine Belt; 44 Long, 6 Rib Count
from $22.99
(9)
Poly Rib Belt Serpentine Belt; 44 Long, 6 Rib Count
Serpentine Belts
Poly Rib Belt Serpentine Belt; 44 Long, 6 Rib Count
from $35.99
(9)
Poly Rib Belt Serpentine Belt; 44 Long, 6 Rib Count
Serpentine Belts

What are the top-rated 2006 Volkswagen Beetle Belts and Hoses?

Top-rated Belts and Hoses for your 2006 Volkswagen Beetle based on customer reviews/ratings are:
Coolant Hose Connector
from $11.99
(5)
Coolant Hose Connector
“Saved my bmw when a coolant hose popped on me”
Coolant Hose Connector
from $23.99
(3)
Coolant Hose Connector
“only one around that had it and it fit”