2006 Toyota Tundra Differentials

Essential 2006 Toyota Tundra Differentials

Motive Gear – Differential Gear Install Kit (Part No.TOYV6IK)

Differential Gear Install Kit

from

$42.99


Product Features:
  • TOYOTA 8″ V6&4CLY TURBO
See More

Yukon Gear – Yoke For Toyota 7.5" IFS (And ’85 And Newer Rear) With 23 Spline Pinion (Part No.41106)

Yoke For Toyota 7.5" IFS (And '85 And Newer Rear) With 23 Spline Pinion

from

$246.99
Yukon yoke for Toyota 7.5″ IFS (and ’85 and newer rear) with 23 spline pinion. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Toyota 7.5″
  • 23 spline
See More

USA Standard Gear – Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft (Part No.17014)

Spartan Locker For Toyota 7.5" With 27 Spline Axles, Includes Heavy-Duty Cross Pin Shaft

from

$669.99
The Spartan Locker, by USA Standard Gear, provides reliable traction at a low cost. Give your vehicle great traction and save some cash. Choose a Spartan Locker for better traction. The Spartan locker by USA standard gear is a mechanical locker that replaces the spiders in a standard case. The Spartan locker’s design does not use the thrust washers and has a revolutionary spring and pin design that makes installation a snap! The couplers and drivers are made from 9310 steel, for added strength. Each Spartan locker carries a one year warranty against defect.

Product Features:
  • Fits Toyota 7.5″
  • Made from 9310 steel for added strength
  • Replaces the spiders in a standard carrier case
See More

Dorman – Rear Differential Cover (Part No.926-958)

Rear Differential Cover

from

$107.99
When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.

Product Features:
  • Rear Differential Cover.
  • Rear Differential Cover.
  • When the thin-gauge steel corrodes on Sequoia, Tacoma, Tundra truck rear differential covers, the typical solution has been to replace the entire axle. This Dorman OE FIX weld-on solution allows direct replacement of only the failed cover.
  • Direct replacement – this weld-on differential cover directly replaces a corroded original cover on certain Sequoia, Tacoma and Tundra trucks
  • Cost-effective repair – rather than buy a new axle, cut off the old cover and weld on this new one
See More

FAE – Transfer Case Switch (Part No.J7101947097FAE)

Transfer Case Switch

from

$42.25
Transfer Case Switch

Yukon Gear – Master Overhaul Kit For Toyota T10.5" Differential (Part No.14173)

Master Overhaul Kit For Toyota T10.5" Differential

from

$824.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses premium bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:
  • Fits 10.5″ Toyota Tundra rear
  • Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
See More

Corteco – Pinion Seal (Part No.J7010163867CFW)

Pinion Seal

from

$8.48
Pinion Seal

Yukon Gear – 07 And Up Tundra Rear 10.5" Cross Pin Shaft With 5.7L (Part No.33415)

07 And Up Tundra Rear 10.5" Cross Pin Shaft With 5.7L

from

$179.99
07 and up Tundra rear 10.5″ cross pin shaft W/5.7L.

Product Features:
  • Cross pin shaft
  • Fits 10.5″ Toyota Tundra
See More

Yukon Gear – T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm (Part No.33399)

T100 & Tacoma Standard Side Gear Thrust Washer 1.60Mm

from

$18.99
Product Features:
  • Side gear thrust washer
  • Fits Toyota Tacoma and T100
See More

Idemitsu – Type TLS-LV Automatic Transmission Fluid – 1 qt (Part No.30040096-75000C)

Type TLS-LV Automatic Transmission Fluid - 1 qt

from

$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.

Product Features:
  • Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
  • Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
  • Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
  • Exceptional wear protection of gears and bearings
  • Provides superior deposit control and protects metal surfaces from rust and corrosion
  • Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

The Carrier Bearing Puller

from

$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
  • Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
See More

Dorman – Pre-Pressed Rear Axle (Part No.926-147)

Pre-Pressed Rear Axle

from

$864.99
Replacing a worn wheel bearing usually requires a time-consuming procedure with a shop press. This Dorman OE FIX loaded axle includes all critical components already assembled for a fast, simple, safe install.

Product Features:
  • Easier installation – this pre-pressed axle assembly includes a new axle shaft, wheel bearing, hub and backing plate pre-assembled and ready to install right out of the box
  • Time saver – eliminates frustrating, unpredictable work required to replace bearings without damaging other components
  • Simpler solution – eliminates the need to use potentially dangerous shop press to perform complete bearing repair
  • Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
See More

Yukon Gear – Toyota 07 & Up Tundra Rear 10.5" Outer Pinion Slinger With 5.7L (Part No.33024)

Toyota 07 & Up Tundra Rear 10.5" Outer Pinion Slinger With 5.7L

from

$15.99
Toyota 07 & up Tundra rear 10.5″ outer pinion slinger w/ 5.7L .

Product Features:
  • Outer slinger
  • Fits 10.5″ Toyota Tundra
See More

Yukon Gear – Toyota 7.5 Pinion Nut (Part No.33155)

Toyota 7.5 Pinion Nut

from

$9.99
Toyota 7.5 pinion nut (M18x1.5).

Product Features:
  • Pinion nut for Toyota 7.5″
  • 18mm x 1.5 thread
See More

Yukon Gear – Toyota T100 & Tacoma Crush Sleeve (Part No.33120)

Toyota T100 & Tacoma Crush Sleeve

from

$16.99
Toyota T100 & Tacoma crush sleeve. Approx 2.325″ long.

Product Features:
  • Crush sleeve for Toyota Tacoma and T100 without factory locker
  • 2.235″ tall
See More

Yukon Gear – 07 And Up Tundra Front Outer Slinger (Part No.33027)

07 And Up Tundra Front Outer Slinger

from

$32.99
07 and up Tundra front outer slinger.

Product Features:
  • Outer slinger
  • Fits 2007 and up Toyota Tundra front
See More

Yukon Gear – Standard Open Spider Gear Kit For Toyota T100 & Tacoma With 30 Spline Axles (Part No.16133)

Standard Open Spider Gear Kit For Toyota T100 & Tacoma With 30 Spline Axles

from

$461.99
Yukon standard open spider gear kit for Toyota T100 & Tacoma with 30 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:
  • Spider gear kit
  • Fits Toytoa Tacoma and T100 open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin spider gear thrust washers.
See More

Needa Parts – Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack (Part No.090-030)

Standard Engine Oil Drain Plug: 9/16-18 Thread, 0.75 " Head, 1 Pack

from

$6.79
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug & help ensure a secure seal.

Product Features:
  • Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles.
  • Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Preload Shim For Toyota T100 (Part No.55075)

Pinion Preload Shim For Toyota T100

from

$27.99
Pinion preload shim for Toyota T100. One single shim. 0.033″ thick. Two needed. Fits against crush sleeve.

Product Features:
  • Fits Toyota T100 and Tacoma
  • 0.140″ thick
See More

Yukon Gear – T100 & Tacoma Roll Pin (Part No.33420)

T100 & Tacoma Roll Pin

from

$8.99
Product Features:
  • Roll pin
  • Fits Toyota Tacoma and T100
See More

Yukon Gear – Yoke For ’04 And Newer Toyota T100 And Tacoma (Without Locker) With 30 Spline (Part No.41113)

Yoke For '04 And Newer Toyota T100 And Tacoma (Without Locker) With 30 Spline

from

$246.99
Yukon yoke for ’04 and newer Toyota T100 and Tacoma (without locker) with 30 spline. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 2005 and up Toyota Tacoma and T100
  • 30 spline
  • 66mm x 66mm bolt pattern
See More

Yukon Gear – Differential (Part No.26050)

Differential

from

$759.99
Differential

Yukon Gear – Oil Baffle (Part No.33007)

Oil Baffle

from

$7.99
Oil baffle for Toyota Landcruiser reverse rotation front, 8″ IFS front & TV6/Tacoma rear with factory locker.

Product Features:
  • Oil baffle
  • Fits Toyota Landcruiser reverse rotation front
See More

Yukon Gear – High Performance Ring & Pinion Gear Set For Toyota 7.5" Reverse Rotation In 4.88 Ratio (Part No.24190)

High Performance Ring & Pinion Gear Set For Toyota 7.5" Reverse Rotation In 4.88 Ratio

from

$398.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:
  • Fits reverse rotation Toyota 7.5″
  • 7.500″ ring gear diameter
  • 23 spline pinion
  • 10 ring gear bolts
  • 4.88 ratio
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

USA Standard Gear – Master Overhaul Kit For Toyota Tacoma And 4-Runner With Factory Electric Locker (Part No.37112)

Master Overhaul Kit For Toyota Tacoma And 4-Runner With Factory Electric Locker

from

$612.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Toyota Tacoma and T100 rear with factory locking differential
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and silicone.
See More

Yukon Gear – Carrier Shim Kit For Toyota 7.5" (Part No.55038)

Carrier Shim Kit For Toyota 7.5"

from

$101.99
7.5″ V6 & 4cyl side shim kit (incl. 7 shims).

Product Features:
  • Carrier shim kit
  • Fits Toyota 7.5″
See More

National – Bearings (Part No.32307)

Bearings

from

$51.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Matched cup and cone components ensures consistent quality and outstanding performance
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

2006 Toyota Tundra Differentials

Maybe you’re in the middle of a full rebuild of that 2006 Toyota Tundra. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 111 different Differentials in our inventory ranging from $5.49 to $1,566.99. That means you can find the exact parts or products you need to keep that 2006 Toyota Tundra running smoothly.

Differentials are only as good as their brand. We stock 18 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Toyota Tundra. Valvoline, Royal Purple, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2006 Toyota Tundra, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 2,810 reviews in this category, some of the top rated parts include MaxGear SAE 75W140 High Performance Gear Oil w/Friction Modifier Additive, 1 QT with 4.9 stars and Toyota 7.5 Pinion Nut with 4.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 2006 Toyota Tundra rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2006 Toyota Tundra Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Toyota Tundra demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Tundra the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular National Differentials

We carry National parts in our stock across Front Differential Pinion Bearings categories, plus more. For a 2006 Toyota Tundra, our most popular National Differentials include:
Bearings
from $89.99
(2)
Bearings
Front Differential Pinion Bearings
Bearings
from $51.99
(1)
Bearings
Front Differential Pinion Bearings

FAQs for 2006 Toyota Tundra Differentials

What are the most purchased Differentials for the 2006 Toyota Tundra?

Out of 111 Differentials for the 2006 Toyota Tundra, the most popular in our inventory are:
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
from $19.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Quart
Differential Oil

What are the top-rated 2006 Toyota Tundra Differentials?

Top-rated Differentials for your 2006 Toyota Tundra based on customer reviews/ratings are:
Toyota 7.5 Pinion Nut
from $9.99
(1)
Toyota 7.5 Pinion Nut
“Matches OEM nut from 1995 Toyota base model 2wd pickup with 7.5″ rear diff. The casting was not as good as original, it had ripples on the mounting ”