2006 Scion xA Towing Products

Essential 2006 Scion xA Towing Products

CURT – Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins (Part No.114883)

Trailer Hitch: 1-1/4" Receiver, 2,000 LB Capacity, Installs as low as 30 Mins

from

$301.99
Connect to your lifestyle with a custom hitch receiver from CURT. All of our custom hitches are designed for a vehicle-specific fit, manufactured with pride, finished for industry-leading rust resistance and tested to rigorous SAE J684 standards for safety. This class 1 trailer hitch and ball mount combination is designed for a custom fit on select years of the Scion xA (see application info to verify fitment). The hitch integrates with the vehicle’s frame and provides a useful and dependable 1-1/4″ x 1-1/4″ receiver. The receiver is perfect for attaching the included ball mount and towing a small trailer, or for adding cargo space with a hitch-mounted cargo carrier, bike rack or other accessory. This particular class 1 hitch is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight (never exceed the lowest-rated towing component). The ball mount included with this trailer hitch quickly and easily installs into the hitch receiver and has a 3/4″ trailer ball hole (trailer ball not included). It can be mounted in the rise or drop position to promote level towing. Like all CURT custom hitches, this class 1 hitch is protected with our co-cured finishing process. It is descaled for a smooth surface, immersed in liquid A-coat for rust resistance inside and out, covered with a durable black powder coat and finally co-cured for an industry-leading rust, chip and UV-resistant shield. No matter where you’re headed or which season of the year you’re towing in, this CURT hitch is equipped for long-lasting resilience to the elements. It features an open-back receiver for easy cleaning, and it comes with all the hardware necessary for the installation.

Product Features:
  • Rated to 2,000 lbs. gross trailer weight and 200 lbs. tongue weight
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • 1-1/4″ x 1-1/4″ ball mount features a 3/4″ hole to accept a trailer ball shank
  • Ball mount can be flipped to provide drop or rise for level towing
  • Made in USA (may include imported hardware)
See More

Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)

LITE MATE 3-2 CONVTR

from

$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:
  • 60 in. Long
  • Adapts Tow Vehicles Taillight System To The Trailers
  • Powers Up To 2.1 Amps Per Output
  • Double-Molded Weatherproof Design; Includes Dust Cover
  • Corrosion Resistant Terminals
  • Includes Splices And Terminal Grease
  • Complete With Splices And Circuit Tester
See More

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)

from

$38.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:
  • 60 inch length
  • Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
  • Double-molded weatherproof design
  • Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
  • Includes 4 wire flat extension
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

2006 Scion xA Towing Products

You count on your 2006 Scion xA to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Towing Products. With 3 Towing Products ranging in price from $18.79 to $301.99, you’re sure to find everything you need for your 2006 Scion xA.

Brands matter. If you want to shop a specific Towing Products brand, we stock 2 different brands like Hopkins and CURT. 2006 Scion xA Towing Products start as low as $18.79!

One of the best ways to find top quality OEM or aftermarket Towing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 16 extensive product reviews on 2006 Scion xA Towing Products.

Did we mention you can order your Towing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Towing Products inventory for your 2006 Scion xA below to get started!

Top-Rated Towing Products Brands For Your 2006 Scion xA

Trusted Towing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Scion xA running right for years to come. In our inventory you’ll find brands like Hopkins CURT, and even more.

Popular Hopkins Towing Products

You’ll find popular Hopkins brand products across Trailer Wiring. All are waiting to get your 2006 Scion xA back on the road. Some of the top-rated Hopkins products in these categories are: