2006 Mitsubishi Eclipse Steering and Chassis Parts
More 2006 Mitsubishi Eclipse Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 2006 Mitsubishi Eclipse, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 2006 Mitsubishi Eclipse Steering and Chassis Parts
Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)
from
$20.79
Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.
Product Features:
See More
Product Features:
- Transmission cooler reinstallation kit
- Contains part numbers 248001, 226201, 240250 and 4 hose clamps
- Provides all hardware for reinstallation of Imperial transmission coolers
- Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
MOOG – Alignment Cam Bolt Assortment (Part No.CAM1A)
from
$434.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can solve excessive tire wear and steering issues
- Provides like-new steering, ease of installation and longer life
- Can bring vehicles back to factory specification
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
MOOG – Suspension Ball Joint (Part No.K7452)
from
$117.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- Hardened ball stud made of OE equivalent or better materials to withstand higher loads
- Easy to install.
- Construction and design validated by MOOG engineers
- Premium forged housing with increased cross section of up to 52% more material in key areas
- Broad coverage for foreign and domestic applications
- Designed to meet or exceed original equipment performance
Driveworks – Sway Bar Link Kit (Part No.DW-K80186)
from
$33.49
Sway Bar Link Kit
Driveworks – Camber Bolt Kit (Part No.DW-K90476)
from
$8.99
Camber Bolt Kit
Rare Parts – Control Arm with Ball Joint (Part No.RP12075)
from
$146.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- With ball joint
- Reduces vibration
- With bushing
MOOG – Stabilizer Bar Bushing Kit (Part No.K200263)
from
$12.99
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Inner sleeve is phosphate coated for corrosion protection
Cardone – Rack and Pinion Assembly (Part No.26-2134)
from
$223.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
MOOG – Tie Rod End (Part No.ES2347RL)
from
$52.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Driveworks – Tie Rod End (Part No.DW-EV457)
from
$14.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
Driveworks – Camshaft Seal (Part No.S-223010)
Rare Parts – Camber Adjusting Kit (Part No.RP17723)
from
$82.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Improves vehicle handling
- Restores OE alignment
- Improves steering geometry
- Easy camber adjustment
Driveworks – Camber Bolt Kit (Part No.DW-K9757)
from
$24.99
Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Precision engineered for improved ride and superior performance
- Performance tested to ensure durability
MOOG – Camber Adjusting Kit (Part No.K90476)
from
$32.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Camber Adjusting Kit (Part No.K90473)
from
$30.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Cardone – Power Steering Pump (Part No.21-5241)
from
$129.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Cardone New – Power Steering Pump (Part No.96-5372)
from
$285.99
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.
Product Features:
See More
Product Features:
- Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
- Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
- Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
- Meets or exceeds O.E. performance.
MOOG – Rack & Pinion Bellows Kit (Part No.K100186)
from
$27.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Manufactured using premium materials
- Engineered to provide long life and dependability
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Driveworks – Bellow Kits (Part No.DW-K9358)
from
$13.99
Driveworks Brand Bellow kits are made to OE specifications. They work with the steering tie rod end, preventing the entering of dust and prolonging the useful life of the inner parts. Driveworks Brand chassis parts help ensure improved steering response a
Product Features:
See More
Product Features:
- Designed to meet or exceeds OE performance specifications
- Durable neoprene rubber
Driveworks – Camber Bolt Kit (Part No.DW-K90473)
from
$17.99
Camber Bolt Kit
Cardone – Power Steering Filter (Part No.20-0012F)
from
$46.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$31.49
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Carquest Premium – Pressure Tube Assembly (Part No.36365)
from
$50.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Pressure Hose Assembly (Part No.35302)
from
$158.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Return Hose Assembly (Part No.37420)
from
$59.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)
from
$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More
Carquest Premium – Return Hose (Part No.40487)
from
$122.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Carquest Premium – Return Line Hose Assembly (Part No.40534)
from
$82.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
Popular 2006 Mitsubishi Eclipse Steering and Chassis Parts Categories
2006 Mitsubishi Eclipse Steering and Chassis Parts
You count on your 2006 Mitsubishi Eclipse to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 54 Steering and Chassis Parts ranging in price from $7.99 to $434.99, you’re sure to find everything you need for your 2006 Mitsubishi Eclipse.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 12 different brands like Imperial, Driveworks, and Cardone. 2006 Mitsubishi Eclipse Steering and Chassis Parts start as low as $7.99!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 902 extensive product reviews on 2006 Mitsubishi Eclipse Steering and Chassis Parts. Some of the top-rated Steering and Chassis Parts products we carry are Tie Rod End with 4.6 stars and Camber Bolt Kit with 4.7 stars.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 2006 Mitsubishi Eclipse below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 2006 Mitsubishi Eclipse
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Mitsubishi Eclipse running right for years to come. In our inventory you’ll find brands like Imperial, Driveworks, Cardone, and even more.
Popular Dorman Steering and Chassis Parts
You’ll find popular Dorman brand products across Ball Joints. All are waiting to get your 2006 Mitsubishi Eclipse back on the road. Some of the top-rated Dorman products in these categories are:
Top-Rated Imperial Steering and Chassis Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Steering and Chassis Parts for your 2006 Mitsubishi Eclipse, and some of our most reviewed Imperial parts include:
FAQs for 2006 Mitsubishi Eclipse Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 2006 Mitsubishi Eclipse?
Out of 54 Steering and Chassis Parts for the 2006 Mitsubishi Eclipse, the most popular in our inventory are:
What are the top-rated 2006 Mitsubishi Eclipse Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your 2006 Mitsubishi Eclipse based on customer reviews/ratings are:
