2006 Mercedes-Benz C280 Fuel and Emissions Systems

Name: Fuel Tank Cleaning Kit
Brand: Delphi
SKU: FC01
Price: 12.49 USD

Below you will find various in-demand Mercedes-Benz Fuel and Emissions Systems, components and accessories for your 2006 C280. Advance Auto Parts has popular C280 parts like Air Flow Sensors, Fuel Injectors, Fuel Pumps and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other C280 model years including 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2007 and more. Select a category of 2006 Mercedes-Benz C280 Fuel and Emissions Systems below and start saving instantly.

Popular 2006 Mercedes-Benz C280 Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

MAP-Barometric Pressures

Smog Pumps

Canister Purge Solenoids

EGR Valves

Fuel Injectors

Fuel Tank Pressure Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Fuel Injector Gaskets

Secondary Air Injection Relays

Fuel Tank Sending Units

Mass Air Flow Sensor Connectors

Fuel Injection Relays

Diverter Valves

Air Pump Check Valve Gaskets

Diesel Fuel Line Seal Rings

Crankcase Breather Hoses

Fuel Injection Pressure Regulator O-Rings

Fuel Cap Tester Adapters

Vacuum Line Connectors

Diesel Exhaust Fluid (DEF) Pump Connector

Essential Fuel and Emissions Systems for 2006 Mercedes-Benz C280s

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$208.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$49.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$219.99

Diverter Valve

from

$145.11

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$15.07

This OE quality breather hose is vehicle specific and a direct replacement for the original component. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

Original Equipment fit, form and function
Manufactured from premium raw materials
Premium OE design
Right fit the first time
For European vehicles

from

$162.99

Fuel Tank Pressure Sensor

from

$501.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$235.99

This secondary air injection pump is designed to match the fit and function of the original pump on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this secondary air injection pump is designed to match the fit and function of the original pump on specified applications.
Restores functionality – reliable replacement for an original part that is leaking or has failed due to internal component failure.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$16.79

ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$42.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$19.29

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$40.99

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$90.33

Purge Valve

from

$276.05

Brake Vacuum Pump

from

$80.99

from

$5.72

FI Throttle Body Mou

from

$228.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$191.99

Carquest Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$117.31

Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.

Product Features:

Low-pressure systems are less complex and more affordable than high-pressure systems
Robust combustion process tolerates lower-quality fuel
Maintenance-friendly design reduces the overhead for system diagnostics

from

$2.28

Air Inj. Pump Check

from

$49.99

from

$43.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$5.28

Vacuum Hose Connecto

from

$2.06

from

$2.51

Fuel Injector Seal

from

$581.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Delphi is a global OE manufacturer and all fuel senders are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns

from

$10.99

Bosch is one of the largest global suppliers of automotive products, developing, manufacturing and supplying precision OE components and systems to vehicle manufacturers and the automotive aftermarket. This 5-piece kit contains 3 O-rings (black), 1 support ring (gray), and 1 protective cap (yellow). Use one kit per injector.

Upgrade your 2006 Mercedes-Benz C280 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Mercedes-Benz C280, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mercedes-Benz or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your C280 functioning at its best. At Advance Auto Parts, we offer a wide selection of 67 Fuel and Emissions Systems for the 2006 Mercedes-Benz C280, designed to meet your needs without breaking the bank. From Air Flow Sensor replacements to Fuel Injectors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2006 Mercedes-Benz C280 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.06 to $605.92, with an average price of $121.71. Our 67 Fuel and Emissions Systems in stock come from 19 trusted brands, so you’re sure to find the right part for your 2006 Mercedes-Benz C280 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Mercedes-Benz C280, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, Delphi, Carquest Premium, and more. Bosch Fuel and Emissions Systems start at just $2.06 and boast an impressive 5 stars average rating from customers. Delphi and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $5.29, and at an average 4 stars rating. With 317 customer reviews and counting, our 2006 Mercedes-Benz C280 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Mercedes-Benz C280 is always ready to roll. We’re committed to providing you with everything you need to keep your C280 in top shape, all in one place. Start shopping confidently below for your 2006 Mercedes-Benz C280!

Best-Selling Air Flow Sensors for 2006 Mercedes-Benz C280s

Enhance the driving experience in your Mercedes-Benz with 11 quality Air Flow Sensor components, starting at $16.79.

show more show less

from

$16.79

Professional, premium aftermarket replacement
Provides the performance and dependability you expect from ACDelco
Manufactured to meet expectations for fit, form, and function

from

$42.99

Bosch OE quality pressure sensors for accurate measurements with high durability, fast response time and wide measuring range

Product Features:

Bosch OE quality pressure sensors for accurate measurements
Bosch OE quality pressure sensors for long term stability
Bosch OE quality pressure sensors with a short response time
Bosch OE quality pressure sensors with improved media resistance

from

$25.65

Ambient Temp Sensor

from

$49.99

from

$95.63

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$262.49

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$283.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$236.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$208.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$163.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$151.16

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

Most Popular 2006 Mercedes-Benz C280 Fuel Injectors

Customize your Mercedes-Benz with 14 Fuel Injectors products like Air Flow Meters and Mass Air, Fuel Injector Gaskets, and Fuel Injectors, all priced under $194.90.

show more show less

from

$126.99

Bosch is the actual OE manufacture, plus or minus 5% deviation from OE specification can set a check engine light.

Product Features:

OE Technology provides the correct function and calibration to ensure trouble-free operation and emission compliance.
100% new product
Not re-manufactured or rebuilt
Sensor and housing are calibrated and sold together ensuring precise sensor reading and optimal engine performance
Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions
Can provide up to 20 percent better fuel consumption

from

$3.79

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$5.29

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$43.99

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$62.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$177.15

Bosch air mass sensors are built to exacting specifications as required for such a sensitive measuring device. Through a precise manufacturing process, the correct type and thickness of platinum wire or thick film ceramic measuring elements are selected and accurately calibrated to provide optimum performance.

Product Features:

OEM Quality Direct fit Application
Measurement of air mass (gas mass) through-flow per unit of time, independent of density and temperature
Extensive measuring range
Highly sensitive, particularly for small changes in flow rate
Wear-free since there are no moving parts
Insensitive to dirt and contamination
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$194.90

Air Mass Meter

from

$106.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$32.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$17.49

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$10.99

from

$5.72

FI Throttle Body Mou

from

$3.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.06

Top Picks for 2006 Mercedes-Benz C280 Fuel Pumps

Upgrade Mercedes-Benz C280s with top-quality Fuel Pumps parts, including 6 OEM and aftermarket selections for your 2006 model.

show more show less

from

$252.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$156.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$296.99

Meet or exceeds OE requirements
Transfers fuel within the tank
Does not include primary fuel pump

from

$257.99

Benchmark quality from the worldwide leader in fuel injection technology. Bosch state-of-the-art turbine fuel pumps offer many advantages when compared to older roller-cell and inner-gear pump designs. These pumps offer near silent operation and improved drivability, the core components of this turbine design significantly reduce wear and deliver a longer service life. Bosch Turbine Fuel Pumps are nearly identical in dimension and appearance to the units they replace for a precise fit every time. Plus, application-specific, illustrated step-by-step instructions are included with all Bosch Turbine Fuel Pumps for safe and easy installation. To prevent hot start problems, Bosch includes a non-return valve that maintains system pressure long after the vehicle has been shut off.

Product Features:

OE-Equivalent Direct fit for easy installation.
OE connections and fittings.
Superior turbine pump design that virtually eliminates fuel pulsation.
Precision, spin-balanced armature to reduce noise and vibration.
Premium carbon brushes, utilizing advanced materials.
Noise suppression coil that eliminates radio frequency interference.
Illustrated step-by-step instructions are included.

from

$218.78

Fuel Pump Assembly

from

$43.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

In-Demand Gas Caps for 2006 Mercedes-Benz C280s

Select from 4 premium Gas Caps parts for your 2006 Mercedes-Benz C280, with prices ranging from $36.99 to $52.34.

show more show less

from

$36.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$52.34

Fuel Tank Cap

from

$51.99

CAP-FUEL

from

$47.50

FUEL TANK CAP

Most Sold 2006 Mercedes-Benz C280 Oxygen Sensors

Explore our best-selling Mercedes-Benz parts for the 2006 C280 among 14 OEM and aftermarket options starting from $74.99.

show more show less

from

$89.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$217.66

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$80.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$159.99

Advanced Wideband sensing element for exact air/fuel measurement
Robust sensor design increases sensor longevity
Seared protection tube due to 100% functional quality test
True Direct-fit
Pre-coated threads with anti-seize compound right out of the box

from

$182.99

Advanced Wideband sensing element for exact air/fuel measurement
Robust sensor design increases sensor longevity
Seared protection tube due to 100% functional quality test
True Direct-fit
Pre-coated threads with anti-seize compound right out of the box

from

$125.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$275.90

DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$168.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$132.05

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$107.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$103.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$98.56

Walker Oxygen Sensors are precision made for outstanding performance and manufactured to meet and exceed all original equipment specification and test requirements.

Product Features:

Improved Engine Response and Performance
Lower Emissions
Improved Fuel Economy
Longer Sensor Life
Meets OEM Specifications Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install

from

$92.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$74.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

Top-Rated Fuel and Emissions Systems Brands For Your 2006 Mercedes-Benz C280

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2006 Mercedes-Benz C280s. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, Delphi, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2006 C280 start at just $2.06 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 2006 Mercedes-Benz C280 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Mercedes-Benz C280, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2006 Mercedes-Benz C280. With over 16 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.06, with an average price of just $162.84. Plus, with over 149 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$177.15

This product is not rated

Air Mass Meter

“”

from
$159.99

This product is not rated

Wideband Oxygen Sensor: 5 Wire, 32.01" Long, Heated, Exact Fit

“”

from
$182.99

This product is not rated

Wideband Oxygen Sensor: 5 Wire, 21.34" Long, Heated, Exact Fit

“”

Popular Delphi 2006 Mercedes-Benz C280 Fuel and Emissions Systems

Delphi auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2006 Mercedes-Benz C280 owner should feel confident when installing genuine Delphi parts in their vehicle. To ensure the best fit and performance for your 2006 C280, Advance Auto Parts carries a full inventory of 4 Delphi Fuel and Emissions Systems. Plus you will be keeping your Mercedes-Benz in peak condition while saving money because prices on these Delphi Fuel and Emissions Systems range from $12.49 to $581.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$296.99

This product is not rated

Fuel Transfer Unit

“”

from
$12.49

This product is not rated

Fuel Tank Cleaning Kit

“”

from
$581.99

This product is not rated

Fuel Tank Sending Unit

“”

FAQs for 2006 Mercedes-Benz C280 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2006 Mercedes-Benz C280s?

Out of 67 Fuel and Emissions Systems that fit 2006 Mercedes-Benz C280s, the following parts are the top sellers:

Fuel Tank Cleaning Kit (11692237) – $12.49
Fuel Injector Seal Kit (11692627) – $5.29
Mass Air Flow (MAF) Sensor (10647086) – $126.99

What’s the price range for 2006 Mercedes-Benz C280 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2006 Mercedes-Benz C280 start at $2.06 and go up to $605.92 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2006 Mercedes-Benz C280?

The average price for Fuel and Emissions Systems for the 2006 Mercedes-Benz C280 is $121.71. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Mercedes-Benz C280 model years?

Yes, we currently carry Fuel and Emissions Systems for 8 model years of Mercedes-Benz C280s between 1994 and 2007. Fuel and Emissions Systems are bought most frequently for the following model years: 2007, 2000, 1999, 1998, 1997, 1996, 1995, and 1994.

What are the cheapest Fuel and Emissions Systems for my 2006 Mercedes-Benz C280?

The cheapest 2006 Mercedes-Benz C280 Fuel and Emissions Systems we carry in stock are:

Fuel Injector Seal (10740455) – $2.06
Air Inj. Pump Check (11884363) – $2.28
Fuel Injector Seal (11474383) – $2.51
Throttle Body Gasket (10307501) – $3.79
Fuel Injection Throttle Body Mounting Gasket (12600323) – $3.99

What types of Fuel and Emissions Systems do you sell for my 2006 Mercedes-Benz C280?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2006 Mercedes-Benz C280:

Can I get help with 2006 Mercedes-Benz C280 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mercedes-Benz Fuel and Emissions Systems and more.

What is your return policy for Mercedes-Benz C280 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Mercedes-Benz C280 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Mercedes-Benz C280 Fuel and Emissions Systems

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 32.5" Long, Heated, Direct Fit (Part No.24332)

Carquest Premium – Multi Purpose Relay (Part No.RAA1827)

Carquest Premium – Diverter Valve (Part No.ECC2994)

Bosch – Bosch Oxygen Sensor (Part No.C501088842BOS)

Rein – Automotive Engine Crankcase Breather Hose (Part No.B2010135373RIN)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA2933)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1615)

Dorman – Secondary Air Injection Pump (Part No.306-018)

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Bosch – Pressure Sensor (Part No.0261230189)

Carquest Premium – Fuel Cap: 10843, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10843)

Carquest Premium – Engine Camshaft Position Sensor Connector (Part No.PTA1226)

Vemo – Purge Valve (Part No.B7080380842VMO)

Pierburg – Brake Vacuum Pump (Part No.N4050447153APG)

Carquest Premium – Engine Cooling Fan Motor Relay (Part No.RAA2143)

Mahle – FI Throttle Body Mou (Part No.C7001453663MAH)

Delphi – Mass Air Flow Sensor (Part No.AF10310)

Carquest Premium – Fuel Pump E2496064 (Part No.E2496064)

Bosch – Port Fuel Injector (Part No.C1000125314BOS)

Elring – Air Inj. Pump Check (Part No.B7048946617ELR)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1534)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)

APA/URO Parts – Vacuum Hose Connecto (Part No.B202573187APA)

Bosch – Fuel Injector Seal (Part No.C101016838BOS)

Elring – Fuel Injector Seal (Part No.C1010681908ELR)

Delphi – Fuel Tank Sending Unit (Part No.FL0279)

Bosch – Fuel Injector Seal Kit (Part No.C106016844BOS)

ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)

Bosch – Pressure Sensor (Part No.0261230189)

Febi – Ambient Temp Sensor (Part No.P4025378043FEB)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1534)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010374948ND)

Bosch – Bosch Oxygen Sensor (Part No.C5010336686BOS)

DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 21.34" Long, Heated, Exact Fit (Part No.234-5096)

DENSO – Wideband Oxygen Sensor: Upstream, 5 Wire, 31.50" Long, Heated, Exact Fit (Part No.234-5091)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 32.5" Long, Heated, Direct Fit (Part No.24332)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 5 Wire, 21.8" Long, Heated, Direct Fit (Part No.24330)

Bosch – Bosch Oxygen Sensor (Part No.C5010648602BOS)

Bosch – Mass Air Flow (MAF) Sensor (Part No.0280218190)

MAHLE Original – Throttle Body Gasket (Part No.G31943)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2405)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2245)

Bosch – Air Mass Meter (Part No.B3130293018BOS)

Bremi – Air Mass Meter (Part No.B3130293018BRM)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ7329)

Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-11189-02)

Victor Reinz – Fuel Injector O-Ring Kit (Part No.15-76944-01)

Bosch – Fuel Injector Seal Kit (Part No.C106016844BOS)

Mahle – FI Throttle Body Mou (Part No.C7001453663MAH)

Victor Reinz – Fuel Injection Throttle Body Mounting Gasket (Part No.71-18931-00)

Bosch – Fuel Injector Seal (Part No.C101016838BOS)

Delphi – Fuel Pump Module Assembly: With Float Arm (Part No.FG1016)

Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit, Wiring Harness and Strainer (Part No.M2496305)

Delphi – Fuel Transfer Unit (Part No.FT4010)

Bosch – Turbine Electric Fuel Pump Assembly (Part No.E30011196647BOS)

APA/URO Parts – Fuel Pump Assembly (Part No.E30012401840APA)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12426)

Carquest Premium – Fuel Cap: 10845, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10845)

APA/URO Parts – Fuel Tank Cap (Part No.E2010401317APA)

Rein – CAP-FUEL (Part No.CPF0077)

Worldpac – FUEL TANK CAP (Part No.E20104188483BLA)

Bosch – Oxygen Sensor: 4 Wire, 12.2" Long, Heated, Exact Fit (Part No.16749)

Bosch – Bosch Oxygen Sensor (Part No.C5010316666BOS)

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

Bosch – Wideband Oxygen Sensor: 5 Wire, 32.01" Long, Heated, Exact Fit (Part No.17019)

Bosch – Wideband Oxygen Sensor: 5 Wire, 21.34" Long, Heated, Exact Fit (Part No.17016)

NTK – Switching Oxygen Sensor: 4 Wire, 19.75" Long, Heated, Direct Fit (Part No.25186)

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015689981ND)

NTK – Switching Oxygen Sensor: 4 Wire, 35.5" Long, Heated, Direct Fit (Part No.25616)

Bosch – Bosch Oxygen Sensor (Part No.C5010332016BOS)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 18.70" Long, Heated, Exact Fit (Part No.234-4896)

Bosch – Oxygen Sensor: 4 Wire, 14.96" Long, Heated, Exact Fit (Part No.16473)

Walker – Walker Oxygen Sensor (Part No.C5010402684WKR)

NTK – Switching Oxygen Sensor: 4 Wire, 18.5" Long, Heated, Direct Fit (Part No.25617)

DENSO – Oxygen Sensor: 4 Wire, 12.40" Long, Heated, Exact Fit (Part No.234-4881)