2006 Lexus ES330 Fuel and Emissions Systems

Below you will find various in-demand Lexus Fuel and Emissions Systems, components and accessories for your 2006 ES330. Advance Auto Parts has popular ES330 parts like Air Flow Sensors, Fuel Pumps, Oxygen Sensors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other ES330 model years including 2004 2005 and more. Select a category of 2006 Lexus ES330 Fuel and Emissions Systems below and start saving instantly.

Popular 2006 Lexus ES330 Fuel and Emissions Systems Categories

Air- Fuel Ratio Sensors

Fuel Tank Cleaning Kits

Air Flow Meters and Mass Air

Gas Caps

Fuel Pumps

Oxygen Sensors

Vapor Canister Purge Valves

Vapor Canister Vent Solenoids

MAP-Barometric Pressures

Canister Purge Solenoids

Fuel Tanks

Fuel Injectors

Vapor Canisters

Fuel Tank Pressure Sensors

Mass Air Flow Sensor Relays

Pressure Regulators

Air Charge Temperature Sensors

Electric Pump Filter and Strainers

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Secondary Air Injection Relays

Fuel Injector Connectors

Fuel Tank Sending Units

Fuel Injector O-rings

Fuel Tank Cap Seals

Fuel Injection Pressure Regulator O-Rings

Vacuum Regulator Valves

Fuel Cap Tester Adapters

Fuel Injector Cushion Rings

Essential Fuel and Emissions Systems for 2006 Lexus ES330s

from

$4.75

Fuel Injector O-Ring

from

$73.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$432.99

This vapor canister has been made to match the original equipment evap canister on certain vehicle years, makes and models, properly restoring emissions controls.

Product Features:

Direct replacement – this evaporative emissions charcoal canister matches the function and performance of the original canister on specified vehicles.
Restores performance – properly repairs issues with emissions controls to clear check engine light and pass inspection.
Application specific – reverse engineered from the original design on certain vehicle years, makes and models
Trustworthy quality – backed by team of engineers and quality specialists in the United States

from

$2.01

Fuel Injector O-Ring

from

$177.91

Evaporative Pressure

from

$10.49

from

$191.54

The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:

OE-Equivalent and direct fit for easy installation.
OE connections and fittings.
The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
Ultra-high balanced armature to minimize noise and vibration.
High pressure check valve provides superior hot fuel handling characteristics.
The brushes are designed for durability, efficiency, and low-resistance operation.
High quality relief valve to protect the fuel delivery system.

from

$15.99

CARQUEST Premium electric fuel pumps are built to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our CARQUEST Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. CARQUEST Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$117.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$16.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$199.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$111.99

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

Direct replacement – this fuel tank strap matches the fit, function and performance of the original part.
Ideal solution – recommended for replacement when the fuel tank is serviced or replaced.
Durable construction – manufactured from quality materials for superior service and reliability
Trustworthy design – backed by 100 years of automotive aftermarket experience

from

$78.91

The Denso Fuel Tank Sending Unit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

DENSO filtration materials designed to trap and hold particulate debris
Designed to fit and seal just like the original equipment
DENSO engineered for great air flow and filtration
Provides a cleaner environment by trapping particulate matter

from

$69.99

CARDONE Remanufactured Mass Air Flow Sensors (MAFS) precisely track O.E. output curves and maintain specific tolerances to ensure accurate scan tool readings for proper operation. 100% re-soldering of critical components ensures superior electrical connections, eliminates intermittent failures and lengthens product life. With CARDONE Mass Air Flow Sensors (MAFS), you can expect smooth vehicle performance.

Product Features:

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$48.49

CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$29.99

Building upon a foundation of premium full-line products established under NGK ignition and NTK oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand: NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. NTK is the only OE supplier with a full-line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, NTK sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. NTK sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
Engine Coolant Temperature (ECT) Sensors measure the temperature of the coolant. The readings from the (ECT) sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing.

from

$68.99

from

$355.99

New Platinum Pro Fuel Tank

Product Features:

Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$30.49

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$4.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$311.28

DENSO a global supplier to automakers manufactures an OE-equivalent direct fit air fuel ratio sensor that maintains the quality and performance of the Original Equipment it replaces. DENSO continues to innovate with the latest development in air fuel ratio sensors. These components, also known as wide-band oxygen sensors, have a broader response range to provide much finer control of air/fuel mixtures over a greater variety of operating conditions.

Product Features:

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$4.29

from

$12.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$100.31

Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.

Product Features:

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$90.37

Dorman’s Vacuum Switching Valve restores the EVAP system to proper operation. Plus, its durable metal and plastic construction ensures years of service.

Product Features:

Includes installation hardware (where applicable)
Designed for long-lasting resistance to harsh road and weather conditions
Direct replacement for a proper fit every time
Quality tested to ensure trouble free installation and performance

from

$2.20

Fuel Inject Cushion Ring, Grommet

from

$2.17

Fuel Inject Cushion Ring

Upgrade your 2006 Lexus ES330 with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Lexus ES330, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Lexus or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your ES330 functioning at its best. At Advance Auto Parts, we offer a wide selection of 76 Fuel and Emissions Systems for the 2006 Lexus ES330, designed to meet your needs without breaking the bank. From Air Flow Sensor replacements to Fuel Pumps upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2006 Lexus ES330 at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.01 to $482.99, with an average price of $109.01. Our 76 Fuel and Emissions Systems in stock come from 19 trusted brands, so you’re sure to find the right part for your 2006 Lexus ES330 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Lexus ES330, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like Bosch, DENSO, Carquest Premium, and more. Bosch Fuel and Emissions Systems start at just $69.99 and boast an impressive 5 stars average rating from customers. DENSO and Carquest Premium also bring quality to the table, with Fuel and Emissions Systems available starting at $4.29, and at an average 5 stars rating. With 766 customer reviews and counting, our 2006 Lexus ES330 Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Lexus ES330 is always ready to roll. We’re committed to providing you with everything you need to keep your ES330 in top shape, all in one place. Start shopping confidently below for your 2006 Lexus ES330!

Best-Selling Air Flow Sensors for 2006 Lexus ES330s

Enhance the driving experience in your Lexus with 10 quality Air Flow Sensor components, starting at $10.49.

show more show less

from

$187.99

DENSO Air/Fuel Ratio Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance.; Each component is precision-built for exact replacement+ and a first time fit.; DENSO gives you the right part and the right fit+ the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$243.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$154.73

The Bosch oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
OE Style connectors and wire lengths.
Base ceramic probe of Zirconium and Yttrium.
Patented Platinum Power Grid.

from

$10.49

from

$29.99

Air Charge Temperature Sensors are designed to meet or exceed OE specifications in form, fit and function to ensure proper monitoring of air temperature entering the engine
NTK’s Engine Coolant Temperature Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper engine operating temperature.
Engine Coolant Temperature (ECT) Sensors measure the temperature of the coolant. The readings from the (ECT) sensor are sent back to the Engine Control Unit (ECU) to adjust the fuel injection and ignition timing.

from

$245.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. While conventional switching oxygen sensors only switch rich or lean, wideband oxygen (or Air-Fuel Ratio) sensors produce a linear output signal that allows the ECU determine exactly how rich or lean an engine is running and make continuous and precise adjustments of the air-fuel mixture to stay closest to stoichiometric, providing the best possible combustion and fewest emissions. A ceramics company at our core, NTK uses state-of-the art technology enabling complete control of the ceramics used in our wideband oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$100.31

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

from

$229.99

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$199.99

from

$98.54

SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.

Most Popular 2006 Lexus ES330 Fuel Pumps

Customize your Lexus with 12 Fuel Pumps products like Fuel Pumps, Electric Pump Filter and Strainers, and Fuel Cap Tester Adapters, all priced under $328.35.

show more show less

from

$17.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.

Product Features:

Filtration performance and micron rating meet or exceed OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$146.99

As the innovator and leader in fuel supply technology, DENSO has conducted superior testing and inspection processes to insure the highest quality fuel supply product. Don’t be fooled by imitations – look for the DENSO name to be sure you’re getting the best.

Product Features:

First Time Fit
Built to DENSO Original Equipment Standards

from

$11.99

CARQUEST gradient density fuel pump strainers deliver reliable filtration and are the first line of defense against fuel system contaminants.

Product Features:

Gradient density provides optimum multi-depth layering of filter media specific for each application
Maximum filtering for increased fuel filter, fuel pump and fuel system life
New strainer required to validate new fuel pump warranty.

from

$91.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$176.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$215.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$15.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$191.54

The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:

OE-Equivalent and direct fit for easy installation.
OE connections and fittings.
The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
Ultra-high balanced armature to minimize noise and vibration.
High pressure check valve provides superior hot fuel handling characteristics.
The brushes are designed for durability, efficiency, and low-resistance operation.
High quality relief valve to protect the fuel delivery system.

from

$328.35

The Denso Electric Fuel Pump is built to meet the stringent requirements of carmakers for high output, extended reliability and reduced noise.

Product Features:

OE-Equivalent and direct fit for easy installation.
OE connections and fittings.
The high output turbine delivers fuel with minimal pressure pulsation for quieter operation.
Ultra-high balanced armature to minimize noise and vibration.
High pressure check valve provides superior hot fuel handling characteristics.
The brushes are designed for durability, efficiency, and low-resistance operation.
High quality relief valve to protect the fuel delivery system.

from

$289.16

The Kyosan Electric Fuel Pump meets or exceeds the OE specifications for fit, durability and performance.

Product Features:

OE-Equivalent electric fuel pump.
Direct fit for easy installation.
OE connections and fittings.
Highly efficient turbine design.
Designed for quieter operation.

from

$39.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$24.49

First Time Fit
Built to DENSO Original Equipment Standards

Top Picks for 2006 Lexus ES330 Oxygen Sensors

Upgrade Lexus ES330s with top-quality Oxygen Sensors parts, including 11 OEM and aftermarket selections for your 2006 model.

show more show less

from

$99.99

DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance. Each component is precision built for exact replacement, and a first time fit. This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity. DENSO gives you the right part and the right fit, the first time.

Product Features:

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$103.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$69.99

Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.

Product Features:

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$104.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Direct Fit includes OE Connector for easy installation
Performance meets or exceeds OE specifications
True Direct-fit OE connectors and harness

from

$80.99

Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
Includes Smart Link Connector, no soldering required
No special tools required for installation
Seared protection tube due to 100% functional quality test
Performance meets or exceeds OE specifications

from

$81.99

Specifically designed to meet the increasing demands of today’s engines
100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

from

$101.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$96.99

NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$311.28

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$227.82

Tarnish-proof platinum electrodes provides longer life and maintains accuracy
Quick-response planar zirconia element can quickly detect oxygen concentration
Measures A/F ratios from approximately 12:1 to 19:1
Increased performance by mapping a/f ratios throughout rpm range
Reduces emissions by keeping the air-fuel mixture at an optimum ratio

from

$138.12

NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Extensively Tested During Manufacture to Guarantee Quality and Reliability
Supplied With a Factory-Fitted OEM Connector for Easy Installation

In-Demand Fuel Injectors for 2006 Lexus ES330s

Select from 23 premium Fuel Injectors parts for your 2006 Lexus ES330, with prices ranging from $2.01 to $207.03.

show more show less

from

$171.99

DENSO’s innovative designs reduces the size and weight which allows for easy installation. Glass film coated sensing elements reduces contamination exposure and improves reliability.

Product Features:

OE technology adapted for the aftermarket
Reduces emissions, increased performance
Delivers the highest reliability and detection accuracy

from

$12.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$48.49

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$69.99

100% re-solder of critical components ensures superior electrical connections, no intermittent failures and longer product life.
On-car vehicle validation routines ensure that modules meet all form, fit, durability and performance requirements.
All modules are 100% tested with automated computer test equipment to ensure full functionality and reliability.
Our sensors precisely track O.E. output curves and maintain spec tolerances to ensure accurate feedback to the vehicle┐s engine control management system.
Components are rated to handle demanding temperature variations for optimum reliability in every environment.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$4.29

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
Offering thousands of high-quality pigtails & sockets for nearly every electrical job

from

$92.99

Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.

Product Features:

CARQUEST MAF use all new high-quality components at the highest quality standards.
Manufactured with new and advanced technology to perform, fit and function at OE specifications.
All new product that is tested with OEM equipment to OEM standards
Outperforms competition when tested in extreme environmental conditions

from

$97.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
Platinum connector threads reduce the number of connection points for faster reaction to change
Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
Ceramic board provides reliable voltage to eliminate engine rough-idle problems
Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed

from

$4.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$117.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

Precisely manufactured internal valves, diaphragms and springs means excellent performance under all engine operating conditions
Quiet operation, no audible regulator noise
Robust diaphragm materials means longer life, improved durability and compatibility with a wide range of fuels
Consistent and predictable fuel pressure throughout system range of control provides great drivability

from

$90.37

Dorman’s Vacuum Switching Valve restores the EVAP system to proper operation. Plus, its durable metal and plastic construction ensures years of service.

Product Features:

Includes installation hardware (where applicable)
Designed for long-lasting resistance to harsh road and weather conditions
Direct replacement for a proper fit every time
Quality tested to ensure trouble free installation and performance

from

$160.99

100% new; Delphi OE Technology Validated to match the vehicle applications; Manufactured to meet or exceed OE requirements

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube.
Delphi OE technology validated to match the vehicle applications

from

$207.03

Denso manufactures an air mass sensor that is engineered to exact OEM specifications for quality, fit and performance. The Denso Air Mass Sensor provides exceptional reliability by incorporating a platinum coated sensing element with a glass film to protect the sensor from contaminants. Denso prevents errors caused by air pulsations produced in the intake air pipe by integrating the control circuit within the top of the air flow sensor so that only the small bypass passage structure with the sensing element is inserted into the intake air pipe, resulting in higher detection accuracy and performance.

Product Features:

OEM Quality Direct fit Application
Platinum coated sensing element
Meets or exceeds OEM specifications
Utilizes the factory style mounts, connectors and fittings
Provides exceptional reliability

from

$139.28

Fuel Injector

from

$135.99

An ACDelco Professional Remanufactured Mass Air Flow (MAF) Sensor is a high quality replacement for many vehicles on the road today. It is a key part of the engine management system. The MAF sensor measures the amount of air entering the engine so that the engine control module can determine the amount of fuel to inject. This ensures the most efficient air/fuel mixture for the best fuel economy and power, while reducing harmful exhaust emissions. Remanufacturing the mass air flow sensor is an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. This mass air flow sensor will provide the same performance, durability, and service life you expect from ACDelco.

from

$90.21

Vacuum Switching Val

from

$8.73

FI Throttle Body Mou

from

$5.52

FI Throttle Body Mou

from

$4.75

Fuel Injector O-Ring

from

$4.29

from

$2.20

Fuel Inject Cushion Ring, Grommet

from

$2.17

Fuel Inject Cushion Ring

from

$2.01

Fuel Injector O-Ring

Most Sold 2006 Lexus ES330 Gas Caps

Explore our best-selling Lexus parts for the 2006 ES330 among 5 OEM and aftermarket options starting from $17.79.

show more show less

from

$17.79

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$20.99

None

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

Top-Rated Fuel and Emissions Systems Brands For Your 2006 Lexus ES330

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2006 Lexus ES330s. Below you’ll find some of our best rated Fuel and Emissions Systems from Bosch, DENSO, and Carquest Premium, and more. Fuel and Emissions Systems from these brands that fit a 2006 ES330 start at just $4.29 and are rated as high as 5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular Bosch 2006 Lexus ES330 Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2006 Lexus ES330, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. Bosch ticks all of those boxes. We offer a wide selection of Bosch Fuel and Emissions Systems, specifically designed for the 2006 Lexus ES330. With over 4 Bosch brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $69.99, with an average price of just $102.68. Plus, with over 176 customer reviews and an average rating of 5 stars, you can trust that our Bosch Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$154.73

(15)

Bosch Oxygen Sensor

“I had the check engine light on my dash and diagnosed it as code p0155 and sensor bank2 sensor1 defective.

Used this part to fix the issue. now it h”

from
$104.99

(15)

Oxygen Sensor: 4 Wire, 14.57" Long, Heated, Exact Fit

“I had the check engine light on my dash and diagnosed it as code p0155 and sensor bank2 sensor1 defective.

Used this part to fix the issue. now it h”

from
$69.99

(2)

Oxygen Sensor: 4 Wire, 24.02" Long, Heated

“Bosch makes great products and quality. Instructions were clear. I’m glad advance auto parts sells parts that fit my vehicle.”

Popular DENSO 2006 Lexus ES330 Fuel and Emissions Systems

DENSO auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2006 Lexus ES330 owner should feel confident when installing genuine DENSO parts in their vehicle. To ensure the best fit and performance for your 2006 ES330, Advance Auto Parts carries a full inventory of 16 DENSO Fuel and Emissions Systems. Plus you will be keeping your Lexus in peak condition while saving money because prices on these DENSO Fuel and Emissions Systems range from $24.49 to $328.35, plus, with more than 376 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from
$191.54

This product is not rated

First Time Fit Electric Fuel Pump

“”

from
$78.91

This product is not rated

First Time Fit Fuel Tank Sending Unit

“”

from
$100.31

This product is not rated

First Time Fit Oxygen Sensor

“”

FAQs for 2006 Lexus ES330 Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2006 Lexus ES330s?

Out of 76 Fuel and Emissions Systems that fit 2006 Lexus ES330s, the following parts are the top sellers:

Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (18730541) – $80.99
Fuel Cap: 10836, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481527) – $17.79
Mass Air Flow Sensor (MAF) – 100% NEW (11887193) – $92.99

What’s the price range for 2006 Lexus ES330 Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2006 Lexus ES330 start at $2.01 and go up to $482.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2006 Lexus ES330?

The average price for Fuel and Emissions Systems for the 2006 Lexus ES330 is $109.01. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other Lexus ES330 model years?

Yes, we currently carry Fuel and Emissions Systems for 2 model years of Lexus ES330s between 2004 and 2005. Fuel and Emissions Systems are bought most frequently for the following model years: 2005 and 2004.

What are the cheapest Fuel and Emissions Systems for my 2006 Lexus ES330?

The cheapest 2006 Lexus ES330 Fuel and Emissions Systems we carry in stock are:

Fuel Injector O-Ring (11844929) – $2.01
Fuel Inject Cushion Ring (10740434) – $2.17
Fuel Inject Cushion Ring, Grommet (10740459) – $2.20
Fuel Injector Connector (11477998) – $4.29
Fuel Injector Connector (12541458) – $4.29

What are the top-rated Fuel and Emissions Systems that fit the 2006 Lexus ES330?

Out of 766 reviews by customers, our 2006 Lexus ES330 Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2006 Lexus ES330 and their top-rated products:

Air Flow Sensors
- Wideband Oxygen Sensor: Upstream, 4 Wire, 9.06" Long, Heated, Exact Fit (20475097) – $243.99
- Wideband Oxygen Sensor: Upstream, 4 Wire, 11.93" Long, Heated, Exact Fit (20471883) – $187.99
- Bosch Oxygen Sensor (10747771) – $154.73
Oxygen Sensors
- Wideband Oxygen Sensor: Upstream, 4 Wire, 9.06" Long, Heated, Exact Fit (20475097) – $243.99
- Wideband Oxygen Sensor: Upstream, 4 Wire, 11.93" Long, Heated, Exact Fit (20471883) – $187.99
- Bosch Oxygen Sensor (10747771) – $154.73

What types of Fuel and Emissions Systems do you sell for my 2006 Lexus ES330?

As of 2/5/25, these are some of the most in-demand types of Fuel and Emissions Systems for a 2006 Lexus ES330:

Can I get help with 2006 Lexus ES330 Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Lexus Fuel and Emissions Systems and more.

What is your return policy for Lexus ES330 Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new Lexus ES330 Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Lexus ES330 Fuel and Emissions Systems

Ishino – Fuel Injector O-Ring (Part No.C1012184281ISH)

Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1347)

Dorman – Evaporative Emissions Charcoal Canister (Part No.911-449)

Ishino Stone – Fuel Injector O-Ring (Part No.C1012262676ISH)

Vemo – Evaporative Pressure (Part No.E2070277160VMO)

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

DENSO – First Time Fit Electric Fuel Pump (Part No.E3000749241ND)

Carquest Premium – Fuel Pump Strainer FS2322211 (Part No.FS2322211)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10528)

Carquest – Multi Purpose Relay (Part No.83A1006)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1323)

Dorman – Fuel Tank Strap Set (Part No.578-303)

DENSO Corporation – First Time Fit Fuel Tank Sending Unit (Part No.E2030266713ND)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-50009)

Delphi – Fuel Tank Cleaning Kit (Part No.FC01)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2434)

NTK – Air Charge Temperature Sensor (Part No.EF0105)

Carquest Premium – Vapor Canister Vent Solenoid (Part No.EGC1045)

KAI – Fuel Tank (Part No.FTK010649)

Carquest Premium – Tethered Locking Fuel Cap: 10509, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10509)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 71859)

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015374973ND)

Carquest Premium – Fuel Injector Connector (Part No.PTA1064)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61276)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010305032ND)

Dorman – Vacuum Switching Valve (Part No.B2024377625DOR)

Ishino – Fuel Inject Cushion Ring, Grommet (Part No.C1011189045ISH)

Ishino – Fuel Inject Cushion Ring (Part No.C1011144317ISH)

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 11.93" Long, Heated, Exact Fit (Part No.234-9042)

DENSO – Wideband Oxygen Sensor: Upstream, 4 Wire, 9.06" Long, Heated, Exact Fit (Part No.234-9057)

Bosch – Bosch Oxygen Sensor (Part No.C501067299BOS)

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

NTK – Air Charge Temperature Sensor (Part No.EF0105)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 4 Wire, 14.8" Long, Heated, Direct Fit (Part No.24827)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010305032ND)

NTK – Wideband Oxygen Sensor: Air-Fuel Ratio 4 Wire, 9.5" Long, Heated, Direct Fit (Part No.24663)

Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1323)

DENSO – First Time Fit Oxygen Sensor (Part No.C5010305033ND)

Delphi – Fuel Pump Strainer (Part No.FS0179)

DENSO – Original Equipment Quality Fuel Pump & Strainer Kit (Part No.950-0132)

Carquest Premium – Fuel Strainer (Part No.FS210)

Carquest Premium – Fuel Pump (Part No.E260149)

Carquest Premium – Fuel Pump (Part No.E2246803)

Delphi – Electric Fuel Pump: With Caps, Hose Clamps, Hose Piece, Pall Nut, Restrictors, Seal (Part No.FE0404)

Carquest Premium – Fuel Pump Strainer FS2322211 (Part No.FS2322211)

DENSO – First Time Fit Electric Fuel Pump (Part No.E3000749241ND)

DENSO – First Time Fit Electric Fuel Pump (Part No.E3000146776ND)

Kyosan – Electric Fuel Pump (Part No.E3000159700KYO)

Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)

DENSO – Original Equipment Quality Fuel Pump Strainer (Part No.952-0006)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 12.80" Long, Heated, Exact Fit (Part No.234-4064)

DENSO – Oxygen Sensor: Downstream, 4 Wire, 10.24" Long, Heated, Exact Fit (Part No.234-4261)

Bosch – Oxygen Sensor: 4 Wire, 24.02" Long, Heated (Part No.15740)

Bosch – Oxygen Sensor: 4 Wire, 14.57" Long, Heated, Exact Fit (Part No.13355)

Bosch – Oxygen Sensor: 4 Wire, 24.92" Long, Heated, Universal (Part No.15733)

DENSO – Oxygen Sensor: 4 Wire, 11.77" Long, Heated, Universal Fit (Part No.234-4209)

NTK – Switching Oxygen Sensor: 4 Wire, 13.75" Long, Heated, Direct Fit (Part No.24594)

NTK – Switching Oxygen Sensor: 4 Wire, 17.75" Long, Heated, Direct Fit (Part No.24564)

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015374973ND)

DENSO – First Time Fit Air Fuel Ratio Sensor (Part No.C5015310428ND)

NTK – NTK Oxygen Sensor (Part No.C5010275324NTK)

DENSO – Mass Air Flow Sensor (Part No.197-6030)

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61276)

Felpro – Fuel Injection Idle Air Control Valve Gasket (Part No.61373)

Carquest Premium – Remanufactured Fuel Injector (Part No.A212-2434)

Cardone – Remanufactured Mass Air Flow Sensor (Part No.74-50009)

Carquest – Fuel Injector Connector (Part No.PT2318)

Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6203)

Spectra Premium – Mass Air Flow Sensor (Part No.MA102)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 71859)

Delphi – Fuel Injection Pressure Regulator (Part No.FP10528)

Dorman – Vacuum Switching Valve (Part No.B2024377625DOR)

Delphi – Mass Air Flow Sensor (Part No.AF10135)

DENSO – First Time Fit Air Mass Sensor (Part No.B3150189521ND)

Original Equipment – Fuel Injector (Part No.C1000144002OEA)

ACDelco – Mass Airflow Sensor (Part No.213-3424)

Dorman – Vacuum Switching Val (Part No.B72001026300DOR)

Kibi Gaskets – FI Throttle Body Mou (Part No.C7001268576KIB)

Kibi Gaskets – FI Throttle Body Mou (Part No.C7001534389KIB)