2006 Jeep Wrangler Belts and Hoses
Find Your Specific 2006 Jeep Wrangler Belts and Hoses
Below you will find various in-demand Jeep Belts and Hoses, components and accessories for your 2006 Wrangler. Advance Auto Parts has popular Wrangler parts like Engine Cooling Hoses, Radiator Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other Wrangler model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2006 Jeep Wrangler Belts and Hoses below and start saving instantly.
Popular 2006 Jeep Wrangler Belts and Hoses Categories
Essential Belts and Hoses for 2006 Jeep Wranglers
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Imperial – "Imperial 1/2"" x 12′ Engine Oil Cooler Hose, 240112" (Part No.240112)
from
$46.99
“1/2″” x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.”
See More
Gates – Gates Premium Molded Heater Hose, 18909 (Part No.18909)
from
$34.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Dorman – Dorman Automatic Belt Tensioner (Tensioner Only), 419-016 (Part No.419-016)
from
$44.49
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 14"" Long, 1.50"" Diameter, D72817" (Part No.D72817)
from
$51.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17"" Long, 1.47"" Diameter, E71932" (Part No.E71932)
from
$27.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Litens – Litens Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 63.5mm Diameter, 900149A (Part No.900149A)
from
$51.99
This Litens pulley is manufactured by the original equipment pulley supplier to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in Germany to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. This is a 63.5mm O.D. grooved pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Litens – Litens Idler Pulley: Direct Fit, Thermoplastic, 127mm Diameter, 900058A (Part No.900058A)
from
$36.49
This pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Holley – Holley Premium Black Mid-Mount Complete Accessory System, 20-293BK (Part No.20-293BK)
from
$3999.99
2009-Up 5.7L. PERFORMANCE PARTS>PERFORMANCE ENGINE>ENGINE>ACCESSORIES & OTHER from Holley
See More
Holley – Holley Premium Mid-Mount Complete Accessory System, 20-292 (Part No.20-292)
from
$3999.99
“Holley’s complete, mid-mount accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a “”bracketless”” design (patent pending), where the accessories bolt directly to the timing cover for a clean, integrated system. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are two optional heater connection configurations. The innovative Holley premium alternator incorporates 6-phase and square wire technology. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated. The kit utilizes Holley’s proven cartridge style water pump. When we say “”complete””, we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.”
See More
Litens – Litens , 900795A (Part No.900795A)
from
$32.99
Litens , 900795A. COOLING SYSTEM – PARTS & COMPONENTS>BELT SYSTEMS>BELT HARDWARE>BELT IDLERS & PULLEYS LITENS from Litens
See More
Gates – Gates DriveAlign Belt Drive Idler/Tensioner Pulley, 38006 (Part No.38006)
from
$35.49
Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25302 (Part No.25302)
from
$19.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt Black, Rubber, 52028265AD (Part No.52028265AD)
from
$30.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Dayco – Dayco Serpentine Belt Kit With Belt, Pulley and Tensioner, 3 Piece Set, 5060883K1 (Part No.5060883K1)
from
$103.99
Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Serpentine Belt Kit With Belt, Pulley, Tensioner, 3-Piece Set, 5060875K4 (Part No.5060875K4)
from
$222.99
Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads & temperatures.
See More
Carquest Standard – "Carquest Serpentine Belt: 82.5"" Long, 6 Rib Count, 825K6" (Part No.825K6)
from
$35.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 85.5 Long, 6 Rib Count, 855K6 (Part No.855K6)
from
$38.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length, 80411 (Part No.80411)
from
$8.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 9/16 Inch Diameter, 22 1/4 Inch Length, 87305 (Part No.87305)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Idler Pulley, Dayco, 89098 (Part No.89098)
from
$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Idler Pulley, Dayco, 89007 (Part No.89007)
from
$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Yukon Gear – Yukon Gear Seal Puller Tool for Popular Gm, Ford, Toyota, and Dana Differentials, 56063 (Part No.56063)
from
$57.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Gates – Gates Automotive XL High Capacity V-Belt, 9465 (Part No.9465)
from
$41.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
See More
Gates – Gates Automotive XL High Capacity V-Belt, 7430 (Part No.7430)
from
$24.79
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt Black, Rubber, 52005794 (Part No.52005794)
from
$13.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25526 (Part No.25526)
from
$27.99
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Gates – Gates Vulco-Flex II Flexible Coolant Hose, 25305 (Part No.25305)
from
$25.49
Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
See More
Upgrade your 2006 Jeep Wrangler with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2006 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Belts and Hoses are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 61 Belts and Hoses for the 2006 Jeep Wrangler, designed to meet your needs without breaking the bank.
From
Engine Cooling Hose
replacements to
Radiator Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2006 Jeep Wrangler at great prices.
Our Belts and Hoses inventory for this model
ranges from just $1.29 to $3,999.99, with
an average price of $765.21.
Our 61 Belts and Hoses in stock come from 12 trusted brands, so you’re sure to find the right part for your 2006 Jeep Wrangler without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Jeep Wrangler, we stock popular OEM and aftermarket Belts and Hoses from top names
like Litens, Dayco, Driveworks, and more.
Litens Belts and Hoses
start at just $24.99 and boast an impressive 4.7 stars average rating from customers.
Dayco and Driveworks also bring quality to the table, with Belts and Hoses available starting at $20.99, and at an average 4.5 stars rating.
With 6,833 customer reviews and counting, our 2006 Jeep Wrangler Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2006 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place.
Start shopping confidently below for your 2006 Jeep Wrangler!
Best-Selling Engine Cooling Hoses for 2006 Jeep Wranglers
Enhance the driving experience in your Jeep with 3 quality Engine Cooling Hose components, starting at $3.99.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16.5"" Long, 1.50"" Diameter, E72242" (Part No.E72242)
from
$37.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt Black, Rubber, 52028265AD (Part No.52028265AD)
from
$30.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Gates – Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (Part No.28411)
Most Popular 2006 Jeep Wrangler Radiator Hoses
Customize your Jeep with 5 Radiator Hoses products
like Coolant Hoses,
By-Pass Hoses, and
Coolant Expansion Tank Hoses, all
priced under $31.49.
Dayco – "Dayco Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9.50"" Long, 1.22"" Diameter, C71933" (Part No.C71933)
from
$31.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length, 80411 (Part No.80411)
from
$8.49
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Gates – Gates Premium Molded Coolant Hose, 22900 (Part No.22900)
from
$30.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Gates – Gates Premium Molded Coolant Hose, 23183 (Part No.23183)
from
$26.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
See More
Dayco – Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (Part No.80273)
from
$1.29
Dayco Standard Heater Hose is designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine. Note: This hose is NOT suitable for fuel or oil transfer.
See More
Top Picks for 2006 Jeep Wrangler Serpentine and V Belts
Upgrade Jeep Wranglers with top-quality Serpentine and V Belts parts, including 29 OEM and aftermarket selections for your 2006 model.
Dayco – Idler Pulley, Dayco, 89098 (Part No.89098)
from
$20.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 76.38 Long, 6 Rib Count, 5060763 (Part No.5060763)
from
$35.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Serpentine Belt Kit With Belt, Pulley and Tensioner, 3 Piece Set, 5060883K1 (Part No.5060883K1)
from
$103.99
Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 76.38 Long, 6 Rib Count, 763K6 (Part No.763K6)
from
$22.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Idler Pulley, Dayco, 89007 (Part No.89007)
from
$30.49
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 88.25 Long, 6 Rib Count, 5060883 (Part No.5060883)
from
$55.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 88.25 Long, 6 Rib Count, 883K6 (Part No.883K6)
from
$33.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 91.75 Long, 6 Rib Count, 918K6 (Part No.918K6)
from
$32.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 91.75 Long, 6 Rib Count, 5060918 (Part No.5060918)
from
$46.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 76.11 Long, 6 Rib Count, 5060760 (Part No.5060760)
from
$47.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 76.11 Long, 6 Rib Count, 760K6 (Part No.760K6)
from
$29.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Driveworks – V-Ribbed Belt, Driveworks, 690K6 (Part No.690K6)
from
$20.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 75 Long, 6 Rib Count, 5060750 (Part No.5060750)
from
$44.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Dayco – Dayco Poly Rib Belt Serpentine Belt 69.09 Long, 6 Rib Count, 5060690 (Part No.5060690)
from
$37.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
See More
Driveworks – Driveworks Poly Rib Belt Serpentine Belt 75 Long, 6 Rib Count, 750K6 (Part No.750K6)
from
$25.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
See More
Yukon Gear – Yukon Gear Seal Puller Tool for Popular Gm, Ford, Toyota, and Dana Differentials, 56063 (Part No.56063)
from
$57.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
See More
Holley – Holley Premium Black Mid-Mount Complete Accessory System, 20-293BK (Part No.20-293BK)
from
$3999.99
2009-Up 5.7L. PERFORMANCE PARTS>PERFORMANCE ENGINE>ENGINE>ACCESSORIES & OTHER from Holley
See More
Holley – Holley Premium Black Mid-Mount Complete Accessory System, 20-292BK (Part No.20-292BK)
from
$3999.99
2009-Up 5.7L. PERFORMANCE PARTS>PERFORMANCE ENGINE>ENGINE>ACCESSORIES & OTHER from Holley
See More
Holley – Holley Premium Mid-Mount Complete Accessory System, 20-292 (Part No.20-292)
from
$3999.99
“Holley’s complete, mid-mount accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a “”bracketless”” design (patent pending), where the accessories bolt directly to the timing cover for a clean, integrated system. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are two optional heater connection configurations. The innovative Holley premium alternator incorporates 6-phase and square wire technology. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated. The kit utilizes Holley’s proven cartridge style water pump. When we say “”complete””, we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.”
See More
Holley – Holley Premium Mid-Mount Complete Accessory System, 20-293 (Part No.20-293)
from
$3999.99
2009-Up 5.7L. PERFORMANCE PARTS>PERFORMANCE ENGINE>ENGINE>ACCESSORIES & OTHER from Holley
See More
Holley – Holley Black Mid-Mount Complete Accessory System, 20-290BK (Part No.20-290BK)
from
$3449.99
“Holley’s complete, mid-mount accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a “”bracketless”” design (patent pending), where the accessories bolt directly to the timing cover for a clean, integrated system. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are two optional heater connection configurations. The innovative Holley premium alternator incorporates 6-phase and square wire technology. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated. The kit utilizes Holley’s proven cartridge style water pump. When we say “”complete””, we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.”
See More
Holley – Holley Mid-Mount Complete Accessory System, 20-290 (Part No.20-290)
Holley – Holley Black Mid-Mount Complete Accessory System, 20-291BK (Part No.20-291BK)
from
$3249.99
“Holley’s complete, mid-mount accessory system has all accessories pulled in tighter than other accessory drives. At the heart of the system is a “”bracketless”” design (patent pending), where the accessories bolt directly to the timing cover for a clean, integrated system. The design offers superb engine visibility to show off your horsepower, not your accessories. Among the many swap friendly features are two optional heater connection configurations. The innovative Holley premium alternator incorporates 6-phase and square wire technology. The compact and reliable SD7 A/C compressor and Type II P/S pump with baffled reservoir are also integrated. The kit utilizes Holley’s proven cartridge style water pump. When we say “”complete””, we mean complete. The Mid-Mount system comes with everything you need. All accessories are included; the water pump, A/C compressor, Alternator, P/S pump with reservoir, and the crank damper. All pulleys and the belt are supplied. Even heater hose adapters, power steering to -6 AN hardline, and the alternator plug/harness are included. Easy assembly was a priority during the entire development of this accessory solution. Color graphical instructions walk you through every step of the ultra-easy installation.”
See More
Holley – Holley Mid-Mount Complete Accessory System, 20-291 (Part No.20-291)
from
$3049.99
2009-Up 5.7L. PERFORMANCE PARTS>PERFORMANCE ENGINE>ENGINE>ACCESSORIES & OTHER from Holley
See More
In-Demand Belt Tensioners for 2006 Jeep Wranglers
Select from 7 premium Belt Tensioners parts for your 2006 Jeep Wrangler, with prices ranging from $44.49 to $136.99.
Dayco – Dayco Automatic Belt Tensioner, 89245 (Part No.89245)
from
$70.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage €“ or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999047A (Part No.999047A)
from
$58.99
This Litens aftermarket part is designed and engineered by one of the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains Chrysler/Dodge/Jeep/Mitsubishi original form, fit, and function specifications. Note: This tensioner has an added lift-lug feature for easy belt removal and installation – This feature was not available on the original part. The part also includes a molded location pin for precise installation as well as a new engine attachment bolt . Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More
Litens – Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999462A (Part No.999462A)
from
$70.99
“Litens was the Original Equipment (O.E.)supplier of this Jeep tensioner and offers this “”O.E. Exact”””
See More
Dayco – Dayco Automatic Belt Tensioner, 89280 (Part No.89280)
from
$58.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage €“ or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.
See More
Litens – Litens , LV999462A (Part No.LV999462A)
from
$136.99
Litens , LV999462A. COOLING SYSTEM – PARTS & COMPONENTS>BELT SYSTEMS>BELT HARDWARE>BELT TENSIONERS LITENS from Litens
See More
Autotecnica – Autotecnica Belt Tensioner, Incl. NTN/NSK Bearing, JE1414611 (Part No.JE1414611)
from
$61.99
Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive €œGenuine€ components.
See More
Dorman – Dorman Automatic Belt Tensioner (Tensioner Only), 419-016 (Part No.419-016)
from
$44.49
This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.
See More
Most Sold 2006 Jeep Wrangler Heater Hoses
Explore our best-selling Jeep parts for the 2006 Wrangler among 4 OEM and aftermarket options starting from $37.99.
Dayco – Dayco Molded Heater Hose EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length, 87792 (Part No.87792)
from
$37.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Dayco – Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 26 1/2 Inch Length, 88429 (Part No.88429)
from
$57.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the €œquick connect€ end allows for fast, convenient installation.
See More
Crown Auto Jeep Replacmnt – Crown Auto Jeep Replacmnt Water Pump To Heater Control Valve, Rubber, 55038223AD (Part No.55038223AD)
from
$56.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, features factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
See More
Gates – Gates Premium Molded Heater Hose, 19039 (Part No.19039)
from
$37.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
See More
Top-Rated Belts and Hoses Brands For Your 2006 Jeep Wrangler
Shop for the best-rated brands offering Belts and Hoses and other products for your 2006 Jeep Wranglers. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and Driveworks, and more. Belts and Hoses from these brands that fit a 2006 Wrangler start at just $20.99 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Litens 2006 Jeep Wrangler Belts and Hoses
When it comes to maintaining or upgrading your 2006 Jeep Wrangler, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2006 Jeep Wrangler. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.99, with an average price of just $51.66. Plus, with over 16 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$24.99
(11)
Litens Idler Pulley: Direct Fit, Steel, 76mm Diameter, 900056A
“It was a perfect fit I was just missing/needing the bolt for it.”
from
$58.99
(4)
Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999047A
“It’s a lot bigger than the stock one. It has 1/8″ between balancer and itself. Use the upper square to adjust to fit belt on.”
from
$70.99
(1)
Litens Accessory Drive Belt Tensioner – Original Equipment Quality, 999462A
“working fine”
Popular Dayco 2006 Jeep Wrangler Belts and Hoses
Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2006 Jeep Wrangler owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2006 Wrangler, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Dayco Belts and Hoses range from $20.99 to $70.99, plus, with more than 89 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
from
$35.99
(5)
Dayco Poly Rib Belt Serpentine Belt 76.38 Long, 6 Rib Count, 5060763
“Worked great. Have the perfect fit parts.”
from
$70.99
(37)
Dayco Automatic Belt Tensioner, 89245
“The belt tensioner was fairly easy to get to. And took less than 5 mins to install. Great product and qualify. Very pleased with the product”
FAQs for 2006 Jeep Wrangler Belts and Hoses
Which Belts and Hoses are best-sellers for 2006 Jeep Wranglers?
Out of 61 Belts and Hoses that fit 2006 Jeep Wranglers, the following parts are the top sellers:
- Driveworks Poly Rib Belt Serpentine Belt 88.25 Long, 6 Rib Count, 883K6 (99984568) – $33.49
- Litens Idler/Tensioner Pulley: Direct Fit, Steel, 76mm Diameter, 900022A (10457741) – $34.49
- Dayco Automatic Belt Tensioner, 89245 (15130023) – $70.99
What’s the price range for 2006 Jeep Wrangler Belts and Hoses?
Belts and Hose prices for the 2006 Jeep Wrangler start at $1.29 and go up to $3,999.99 for the most premium parts.
What’s the average price of a Belts and Hose for a 2006 Jeep Wrangler?
The average price for Belts and Hoses for the 2006 Jeep Wrangler is $765.21. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Jeep Wrangler model years?
What are the cheapest Belts and Hoses for my 2006 Jeep Wrangler?
The cheapest 2006 Jeep Wrangler Belts and Hoses we carry in stock are:
- Dayco Straight Heater Hose EPDM Rubber, 3/4 Inch Diameter (Sold by foot), 80273 (10844595) – $1.29
- Gates Safety Stripe Standard Straight Heater Hose (Sold by foot), 28411 (10505038) – $3.99
- Dayco Molded Heater Hose EPDM Rubber, 3/4 Inch Diameter, 6 Inch Length, 80411 (5197090) – $8.49
- URO Parts Acc. Belt Tensioner Pulley, 70.5mm OD x 17mm ID x 24.5mm, 06F903315P (50200485) – $19.99
- Idler Pulley, Dayco, 89098 (20130180) – $20.99
What are the top-rated Belts and Hoses that fit the 2006 Jeep Wrangler?
Out of 6,833 reviews by customers, our 2006 Jeep Wrangler Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2006 Jeep Wrangler and their top-rated products:
- Serpentine and V Belts
- Dayco Serpentine Belt Kit With Belt, Pulley and Tensioner, 3 Piece Set, 5060883K1 (11579422) – $103.99
- Idler Pulley, Dayco, 89098 (20130180) – $20.99
- Dayco Poly Rib Belt Serpentine Belt 76.38 Long, 6 Rib Count, 5060763 (20060939) – $35.99
- Belt Tensioners
- Dayco Serpentine Belt Kit With Belt, Pulley and Tensioner, 3 Piece Set, 5060883K1 (11579422) – $103.99
- Idler Pulley, Dayco, 89098 (20130180) – $20.99
- Dayco Poly Rib Belt Serpentine Belt 76.38 Long, 6 Rib Count, 5060763 (20060939) – $35.99
- Radiator Hoses
- Dayco Serpentine Belt Kit With Belt, Pulley and Tensioner, 3 Piece Set, 5060883K1 (11579422) – $103.99
- Idler Pulley, Dayco, 89098 (20130180) – $20.99
- Dayco Poly Rib Belt Serpentine Belt 76.38 Long, 6 Rib Count, 5060763 (20060939) – $35.99
What types of Belts and Hoses do you sell for my 2006 Jeep Wrangler?
As of 8/2/26, these are some of the most in-demand types of Belts and Hoses for a 2006 Jeep Wrangler:
Can I get help with 2006 Jeep Wrangler Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Belts and Hoses and more.
What is your return policy for Jeep Wrangler Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Jeep Wrangler Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
