2006 Jeep Wrangler Engine Parts

Name: Harmonic Balancer Assembly
Brand: Dorman
SKU: 594-405
Price: 69.99 USD
Rating: 5.0 (1 reviews)

Below you will find various in-demand Jeep Engine Parts, components and accessories for your 2006 Wrangler. Advance Auto Parts has popular Wrangler parts like Engine Timing Parts, Camshafts, Valve Cover and Cylinder Heads and more. You’ll also find aftermarket and OEM Engine Parts for other Wrangler model years including 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 and more. Select a category of 2006 Jeep Wrangler Engine Parts below and start saving instantly.

Popular 2006 Jeep Wrangler Engine Parts Categories

Multi Purpose O-Rings

Valve Covers

Engine Timing Belt Kit With Water Pumps

Engine Valve Lifters

Valve Cover Gaskets

Engine Timing Chain Kits

Oil Pumps

Oil Pan Gaskets

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Plenum Gasket Sets

Crankshaft Position Sensors

Timing Covers

Balance Shaft Chain and Kits

Engine Crankshaft Kits

Harmonic Balancers

Timing Cover Gasket Sets

Timing Belt Tensioner Springs

Cylinder Head Gasket Sets

Camshaft Synchronizers

Timing Belt Component Kits

Valve Cover Plugs

Engine Timing Belt Idler Pulleys

Cylinder Head Gaskets

Timing Belt Tensioners

Oil Caps

Standard Piston Sets

Camshaft Position Sensor Connectors

Engine Oil Dipsticks

Engine Camshaft Bolts

Engine Oil Pump Pickup Tube and Screens

O-Rings

Timing Cover Repair Sleeves

Oil Pump Shafts

Timing Cover Seals

Balance Shaft Chain Tensioners

Engine Valve Stem Seals

Piston and Liners

Oversized Main Bearings

Standard Piston Rings

Lower Gasket Sets

Timing Chains

Camshaft Seals

Balance Shaft Sprockets

Engine Valve Springs

Fuel Pump Flange Gaskets

Timing Chain Guides

Oil Pump Screens

Timing Crank Gears

Engine Variable Timing Solenoid Connectors

Rocker Arm Bolts

Fuel Pump Gaskets

Rocker Arm Shafts

Balance Shaft Chain Guides

Fuel Tank Sending Unit Gaskets

Engine Valve Cover Camshaft Bore Plugs

Engine Rocker Arm Pivots

Remanufactured Engines

Cylinder Heads

Engine Assembly Lube

Engine Oil Pump Primers

Engine Oil Slinger

Engine Oil Pump Pickup Tube O-Rings

Engine Oil Pump Sleeve

Valve Train Set Up Spring Set

Essential Engine Parts for 2006 Jeep Wranglers

from

$69.99

This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Stringent standards help ensure excellent tensile and impact strength for greater durability.

Product Features:

Ideal replacement – this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
Durable construction – stringent specifications and careful construction help ensure longevity
Thoroughly tested – this harmonic balancer has undergone dimensional verification, material validation and functional testing
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$37.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Helps improve cylinder sealing for less blow-by
Retains standard ring gaps in top groove
DUROSHIELD« skirt-coated piston
Moly-graphite coating extends engine life
Reduces friction for higher fuel economy
Prevents damage from inadequate lubrication on start-up

from

$20.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, timing guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Designed to meet or exceed OEM performance requirements
Refer to our online catalog for detailed application-specific information

from

$244.99

Remanufactured precision machined OE crankshafts.

Product Features:

Includes matching rod and main bearings.
Journals Micropolished.
All units subject to complete quality inspection.

from

$28.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$54.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: split-lip; 2-piece
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$44.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$28.99

Is your Jeep’s cylinder head gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement cylinder head gaskets that will give you years of service and get you back on the road.

Product Features:

Composite
OE Style
Direct Fit

from

$5.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$14.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Offers Plus Or Minus 3 Degrees Of Caster / Pinion Angle

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$10.49

Engine$aver Hardware cost-saving application
Repairs worn sealing surfaces to assure a leak free repair
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$254.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$30.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$177.99

Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep(R) vehicles. With over 8,000 Different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$61.99

The Crankshaft Position Sensor plays a vital role in your engine’s operation, to determine the exact position of then engine’s crankshaft to the ECM. The ECM then uses this information to determine fuel and spark timing or engine misfire detection. A failed sensor can result in a check engine light, failure to start, intermittent stalling, or misfire. Crankshaft Position Sensors are a premium quality product with outstanding support and leading innovation bred from our OE heritage.

Product Features:

THE DIFFERENCE: Enhanced, robust circuit board traces and precision-wound coated-copper windings increase durability, longevity and performance
OE QUALITY: Designed to meet or exceed OE specifications, fit, form and function to ensure proper position and/or rotating speed of the crankshaft
EXTENSIVE TESTING: 100 percent thermal shock and vibration tested for best in class performance and reliability in the most extreme conditions
PRODUCT ENGINEERING: Premium seals prevent leaks or corrosion, while optimized magnet size and strength ensures precise, consistent signal output
INSTALLATION AND SUPPORT: Includes OE style brackets, hold downs, hardware, spacers and weathertight connectors

from

$5.99

Crown Automotive offers the largest line of replacement parts for Jeep (R), as well as a growing line of parts for Chrysler and Dodge vehicles. Our applications features Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Constructed From Plastic
Axle Oil Slingers Will Help You Guide Your Axle Through The Inner Axle Seal With Ease
Crown Automotive Offers A Wide Selection Of Replacement Part To Meet Your Application Needs
Direct-Fit Replacement

from

$1.99

OILPUMPPICKUPTBORING

from

$122.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool« engine oil cooler kit
Imperial Econo-Kool® engine oil cooler kit
Lightweight construction with high-efficiency turbulators
Light-duty applications
All except Chevrolet V8 applications
Size: 3/4 in. x 7-1/2 in. x 12-1/2 in.

from

$176.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Head gasket set (HS) contains all the gaskets and seals required to remove and replace a cylinder head(s) on an engine.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$39.49

Timing chains stretch over time. If left untouched, they can begin jumping teeth on the camshaft and crankshaft sprockets. This will change your timing and will do major damage to your Jeep’s engine. It is recommended that you change the timing chain.

Product Features:

OE Style
Direct Fit

from

$173.99

Manufactured to meet critical OE quality fit, form and function requirements demanded by today’s vehicle manufacturers, Dayco’s timing component kit ensures long lasting peak performance. This kit is designed to replace worn or damaged original equipment timing belts, tensioners and idler pulleys. It includes pre-packaged tensioners, idler pulleys and instructions – each matched to a specific make, model and vehicle year.

Product Features:

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$351.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$262.99

Made in USA. Melling oil pumps provide dependable performance every time in every application. Every Melling oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. Gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Melling oil pumps are tested for pressure and flow under operating conditions to ensure quality

from

$21.49

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$186.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$7.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$35.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Upgrade your 2006 Jeep Wrangler with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2006 Jeep Wrangler, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Jeep or enhancing its overall performance, Engine Parts are key to keeping your Wrangler functioning at its best. At Advance Auto Parts, we offer a wide selection of 157 Engine Parts for the 2006 Jeep Wrangler, designed to meet your needs without breaking the bank. From Engine Timing Part replacements to Camshafts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2006 Jeep Wrangler at great prices. Our Engine Parts inventory for this model ranges from just $1.99 to $4,539.99, with an average price of $201.98. Our 157 Engine Parts in stock come from 28 trusted brands, so you’re sure to find the right part for your 2006 Jeep Wrangler without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Jeep Wrangler, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, Melling, Dorman, and more. FELPRO Engine Parts start at just $3.99 and boast an impressive 4.6 stars average rating from customers. Melling and Dorman also bring quality to the table, with Engine Parts available starting at $24.99, and at an average 4.3 stars rating. With 2,532 customer reviews and counting, our 2006 Jeep Wrangler Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Jeep Wrangler is always ready to roll. We’re committed to providing you with everything you need to keep your Wrangler in top shape, all in one place. Start shopping confidently below for your 2006 Jeep Wrangler!

Best-Selling Engine Timing Parts for 2006 Jeep Wranglers

Enhance the driving experience in your Jeep with 27 quality Engine Timing Part components, starting at $6.99.

show more show less

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$173.99

Engineered for the majority of domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and a tough, wear-resistant belt
Meets or exceeds OE quality

from

$186.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$55.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$87.99

This direct replacement timing cover matches the fit and function of the original equipment cover for a reliable repair. This part has undergone extensive testing to ensure adherence to precise design standards.

Product Features:

Direct replacement – this engine timing cover matches the fit and function of the original equipment cover
Durable construction – this part is specifically designed to withstand extreme underhood temperatures for a long service life
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone extensive testing to ensure a quality fit and long service life

from

$54.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Utilizing high grade materials to ensure peak conductivity and perfect connections
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

from

$173.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$156.99

Crown Automotive offers the largest line of replacement parts for Jeep(R), as well as a growing line of parts for Chrysler and Dodge. Our applications Comes with Axle, Body, Brake, Clutch, Cooling, Electrical, Engine, Fuel, Lamps, Mirrors, Steering, Suspension, Transmission and Wiper.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$121.99

Utilizes the latest in design and technology to offer complete chain sets. CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance. Utilizes the latest in design and technology to offer complete chain sets. Refer to our online catalog for detailed application-specific information. SET INCLUDES: S822T Engine Timing Camshaft Sprocket (1 EA), S809 Engine Timing Crankshaft Sprocket (1 EA), C385 Engine Timing Chain (1 EA).

Product Features:

Timing Set includes all components for a quick and efficient replacement
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$32.99

A timing chain synchronizes the rotation of the crankshaft and camshaft(s) ensuring proper timing and allows the engine’s valves to open and close during each cylinder’s firing. Available in kits or as a stand-alone product, our chains are pre-stressed and heat-treated for increased durability. Our chains are engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$142.99

TimingSet

from

$11.79

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Rubber
OE Style
Direct Fit

from

$139.99

ENGTMNGBLTTNSHYD ASY

from

$124.99

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
Precision machined sprockets for exact timing
High-grade plastic guides use same material as OE for excellent wear resistance
Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

from

$77.99

ENG TIMNG BELT IDLER

from

$74.99

All components meet or exceed O.E.M. specifications in manufacturing and material. SET INCLUDES: S803 Engine Timing Crankshaft Sprocket (1 EA), 9-4191 Engine Balance Shaft Chain (1 EA), 9-5297 Engine Balance Shaft Chain Guide (1 EA), S642 Engine Balance Shaft Sprocket (1 EA), 9-5298 Engine Balance Shaft Chain Tensioner (1 EA).

Product Features:

Meet or exceed OEM performance requirements, ensuring a quiet and maintenance free experience
Utilizes the latest in design and technology to offer a complete chain kit solution
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance

from

$58.99

Along with the timing chain, tensioners, and guides, sprockets are an integral component within the timing system. Timing gears and sprockets are available as part of complete timing kits as well as for individual purchase and installation

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$23.99

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$21.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$20.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$15.99

ENG TIMNG CHAINGUIDE

from

$14.99

A timing chain guide serves as a track or guide, for the timing chain, connecting the crankshaft and camshaft. Designed to meet or exceed OEM performance requirements, Timing Guides, which are available in kits or as a stand-alone product, utilize the latest in design and material technology, ensuring quiet and maintenance-free experience

Product Features:

Extensively tested and measured for function, fitment, and durability to ensure optimal performance
CAD designed and manufactured using premium materials
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Refer to our online catalog for detailed application-specific information

from

$12.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$11.99

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Most Popular 2006 Jeep Wrangler Camshafts

Customize your Jeep with 13 Camshafts products like Camshaft Position Sensors, Camshaft Seals, and Camshaft Position Sensor Connectors, all priced under $193.99.

show more show less

from

$193.99

That “laughing monkeys” sound coming from your Jeep is no laughing matter. The original equipment design Chrysler oil pump drive assembly (OPDA) on certain Jeep Wrangler TJ models with 4.0L six-cylinder engines tends to fail due to insufficient lubrication of the upper bushing, which causes the center shaft to seize. A malfunctioning OPDA can destroy the cam bearing and filters, and in extreme cases of wear or neglect, stop driving the oil pump. Before any of that very expensive damage occurs, you may be treated to a sound that Wrangler owners know belongs in a jungle, not underneath the hood of their vehicle. This Dorman OE FIX OPDA replaces the flawed factory original steel upper bushing with one made of a self-lubricating material. This design upgrade is engineered to ensure the proper and consistent lubrication of the center shaft of the OPDA assembly, providing a more permanent repair that will keep future costs at bay and snickering simians where they belong.

Product Features:

Upgraded replacement – this oil pump driver assembly (OPDA) features an upper bushing made of self-lubricating material instead of the factory design’s steel bushing, eliminating a common cause of OPDA failure
Ensures critical lubrication – redesigned upper bushing applies consistent lubrication to the OPDA center shaft to help prevent seizure and assembly failure that can disable certain Wrangler TJ models
Eliminates noise – engineered to eliminate and prevent what Jeep enthusiasts call the “laughing monkeys” sound foretelling imminent OPDA failure (Note: no monkeys were harmed in the design of this upgraded OPDA)
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$29.99

Carquest crankshaft and camshaft position sensors are designed to meet original equipment (OE) fit, form and function and are built to ensure reliable performance at a great price. Each sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest crankshaft and camshaft position sensors are a cost-effective solution for your engine management repair. Carquest sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$24.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$29.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including the

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$45.99

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$10.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$50.99

Carquest Premium camshaft position sensors are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Carquest Premium crankshaft and camshaft sensors are engineered with technology that provides increased output accuracy through a stronger, more consistent signal. Our sensors are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium crankshaft and camshaft position sensors undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Engineered with technology that provides increased accuracy with a stronger, more consistent signal
Sensors are based on proven hall effect and variable reluctance technology
Includes OE-style brackets, hold downs, hardware, or spacers as needed for each application.
O-rings and seals are included if required.
Weather-tight connectors prevent leaks and corrosion for better reliability.
Extensive design validation testing and 100% end-of-line tested.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$5.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$45.49

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$39.99

This engine camshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this engine camshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
Ideal solution – engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$28.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$14.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Offers Plus Or Minus 3 Degrees Of Caster / Pinion Angle

from

$5.49

Product Features:

Brand may vary by location

Top Picks for 2006 Jeep Wrangler Valve Cover and Cylinder Heads

Upgrade Jeep Wranglers with top-quality Valve Cover and Cylinder Heads parts, including 26 OEM and aftermarket selections for your 2006 model.

show more show less

from

$5.29

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$176.99

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
UNIQUE COMBUSTION SEAL – Accommodates high cylinder pressures and head movement encountered with engines
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$52.99

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
UNIQUE COMBUSTION SEAL – Exclusive Laser Weld stopper layer technology reduces gasket damage from blow out and helps ensure a stronger combustion seal
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
HANDLES EXTREME ENGINE CONDITIONS – Engineered and manufactured to inhibit over-compression of embossments to maintain a superior seal under peak combustion pressures and temperatures
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$52.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$176.99

MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
Head gasket set (HS) contains all the gaskets and seals required to remove and replace a cylinder head(s) on an engine.
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

from

$9.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$39.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$151.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$273.99

This replacement valve cover matches the fit and function of the original equipment part that may be damaged or warped. Made from quality materials for excellent fit and superior heat resistance, this valve cover has undergone extensive testing.

Product Features:

Direct replacement – this valve cover matches the original equipment part for fit and function
Durable construction – this valve cover is made of quality materials to withstand extreme temperatures to resist leaking
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable service

from

$15.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$13.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$2.49

from

$1.99

Crown Automotive offers the largest line of replacement parts for Jeep (R). Crown Automotive has consistently maintained its commitment to offering only quality parts and exceptional service. Crown Automotive continues to be the leader in quality replacement parts for Jeep (R) vehicles.

Product Features:

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$5.29

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Metal
OE Style
Direct Fit

from

$47.49

Composite
OE Style
Direct Fit

from

$1933.99

The Edelbrock No. 50169 Performer Cylinder Head is designed as a bolt-on performance upgrade for 1987-2006 Jeep’s with a 4.0L inline six engine. They feature better flowing intake/exhaust ports along with a modern combustion chamber design and back cut and swirl polished valves for improved flow. Retains the stock valve angle, pushrod length and valve cover bolt pattern for use with factory components and off the shelf accessories. Larger reinforced rocker bosses for improved strength at high RPM and Heli-Coil threaded inserts in the intake manifold bolt holes for added strength as well as a 3/4″ deck throughout the head also promotes stiffness and durability. This cylinder head is machined to accept both distributor or coil pack ignition. To optimize airflow, this cylinder head is designed with a 1991-2006 4.0L intake port location and 1991-98 4.0L exhaust port size. As a result, this cylinder head must be used with a 1991-2006 intake manifold and a 1991-1998 exhaust manifold. Aftermarket exhaust headers can also be used in place of 1991-1998 exhaust manifolds and MUST be used in place of 1999-2006 exhaust manifolds. Most aftermarket exhaust headers are compatible, but please check with the exhaust header manufacture to verify. This head is NOT compatible with 1999-2006 OEM exhaust manifolds.

from

$837.99

New Cylinder Heads are complete builds & include new valve stem seals & soft plugs. All threads are checked & repaired if necessary. All passages & part interfaces are pressure checked.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$603.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$587.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$96.99

Edelbrock part No. 7348 head gasket is intended for 1987-06 Jeep with 4.0L Inline 6. This gasket comes as a set and has a 4.005″ bore size, .042″ compressed thickness and 8.88cc volume.

from

$12.99

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$12.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$6.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$5.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

In-Demand Engine Mounts for 2006 Jeep Wranglers

Select from 2 premium Engine Mounts parts for your 2006 Jeep Wrangler, with prices ranging from $34.49 to $39.99.

show more show less

from

$34.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to JEEP 97-06;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2006
Weight approx: 3 Lbs
PART GROUP: 2883, 2883

from

$39.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

Most Sold 2006 Jeep Wrangler Engine Gaskets and Seals

Explore our best-selling Jeep parts for the 2006 Wrangler among 19 OEM and aftermarket options starting from $1.99.

show more show less

from

$52.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$20.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$56.99

Tired of looking at the stains on your driveway? Are you repairing or rebuilding your engine? Gaskets are a cheap solution to prevent or stop leaks. Omix-ADA offers high quality replacement gaskets designed specifically for your Jeep.

Product Features:

Rubber
OE Style
Direct Fit

from

$149.99

EngConvGsktSet

from

$35.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$57.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$23.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$7.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$32.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL – Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET – Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE – Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$19.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$53.99

Is your Jeep’s valve cover gasket leaking? Or, are you rebuilding an engine and need fresh gaskets? Omix-ADA offers high-quality replacement gaskets that will give you years of service and get you back on the road.

Product Features:

Rubber
OE Style
Direct Fit

from

$317.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$11.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Easy Installation

from

$44.99

Leading Manufacturer Of Quality Replacement Parts For Jeep
Meets Standards For Quality
Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
Improve The Performance
Easy Installation

from

$14.99

GASKETS

from

$10.49

Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.

Product Features:

Exhaust
Sold Individually
OE Style
Direct Fit

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$1.99

MAHLE gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:

All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
MAHLE gaskets is the leader in Domestic, Asian and European applications
The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package

Top-Rated Engine Parts Brands For Your 2006 Jeep Wrangler

Shop for the best-rated brands offering Engine Parts and other products for your 2006 Jeep Wranglers. Below you’ll find some of our best rated Engine Parts from FELPRO, Melling, and Dorman, and more. Engine Parts from these brands that fit a 2006 Wrangler start at just $3.99 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2006 Jeep Wrangler Engine Parts

When it comes to maintaining or upgrading your 2006 Jeep Wrangler, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2006 Jeep Wrangler. With over 3 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $3.99, with an average price of just $29.99. Plus, with over 131 customer reviews and an average rating of 4.6 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $3.99

(26)

Fuel Pump Mounting Gasket

“Needed for pump that was bought”

from $52.99

(93)

VALVE COVER GASKET SET

“–”

from $32.99

(12)

Engine Crankshaft Seal Kit

“It fit perfect”

Popular Melling 2006 Jeep Wrangler Engine Parts

Melling auto parts is one of the highest quality Engine Part brands in the market. Any 2006 Jeep Wrangler owner should feel confident when installing genuine Melling parts in their vehicle. To ensure the best fit and performance for your 2006 Wrangler, Advance Auto Parts carries a full inventory of 3 Melling Engine Parts. Plus you will be keeping your Jeep in peak condition while saving money because prices on these Melling Engine Parts range from $55.99 to $124.99, plus, with more than 28 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $124.99

(17)

Stock Replacement OE Type High Volume Oil Pump and Screen

“Works great got my oil pressure back to normal was was around 15-20 at idle and 35 going down the road. Now idle is 40psi and 55-60 going down the roa”

from $55.99

(2)

Stock Replacement Type Oil Pump Repair Kit

“better than buying a new one.”

from $100.99

(9)

Stock Replacement OE Type Oil Pump

“This oil pump fits perfectly as an OE replacement. It is designed to be OE, but it is far superior. It is heavier and feel more solid than the origina”

FAQs for 2006 Jeep Wrangler Engine Parts

Which Engine Parts are best-sellers for 2006 Jeep Wranglers?

Out of 157 Engine Parts that fit 2006 Jeep Wranglers, the following parts are the top sellers:

Engine Valve Lifter (5688728) – $9.99
Engine Oil Filler Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (18481442) – $13.99
Engine Push Rod (3709345) – $5.29

What’s the price range for 2006 Jeep Wrangler Engine Parts?

Engine Part prices for the 2006 Jeep Wrangler start at $1.99 and go up to $4,539.99 for the most premium parts.

What’s the average price of a Engine Part for a 2006 Jeep Wrangler?

The average price for Engine Parts for the 2006 Jeep Wrangler is $201.98. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Jeep Wrangler model years?

Yes, we currently carry Engine Parts for 36 model years of Jeep Wranglers between 1987 and 2025. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016, and 2015.

What are the cheapest Engine Parts for my 2006 Jeep Wrangler?

The cheapest 2006 Jeep Wrangler Engine Parts we carry in stock are:

OE Replacement (11906269) – $1.99
Fuel Pump Gasket (10509522) – $1.99
OE Replacement (50074086) – $1.99
OILPUMPPICKUPTBORING (50074480) – $1.99
Engine Rocker Arm Bridge (19694256) – $2.49

What are the top-rated Engine Parts that fit the 2006 Jeep Wrangler?

Out of 2,532 reviews by customers, our 2006 Jeep Wrangler Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2006 Jeep Wrangler and their top-rated products:

Valve Cover and Cylinder Heads
- PermaTorque Engine Cylinder Head Gasket Set (20688005) – $176.99
- Engine Push Rod (3709345) – $5.29
- PermaTorque Engine Cylinder Head Gasket (20688387) – $52.99
Engine Gaskets and Seals
- PermaTorque Engine Cylinder Head Gasket Set (20688005) – $176.99
- Engine Push Rod (3709345) – $5.29
- PermaTorque Engine Cylinder Head Gasket (20688387) – $52.99

What types of Engine Parts do you sell for my 2006 Jeep Wrangler?

As of 11/2/25, these are some of the most in-demand types of Engine Parts for a 2006 Jeep Wrangler:

Can I get help with 2006 Jeep Wrangler Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Jeep Engine Parts and more.

What is your return policy for Jeep Wrangler Engine Parts?

Advance Auto Parts keeps returns simple. For new Jeep Wrangler Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Jeep Wrangler Engine Parts

Dorman – Harmonic Balancer Assembly (Part No.594-405)

Sealed Power – Engine Piston Set (Part No.H822CP 30)

Cloyes Gear – Engine Timing Chain Guide (Part No.9-5750)

Crankshaft Rebuilders – Remanufactured Crankshaft Kit (Part No.25420)

Felpro – CYLINDER HEAD BOLT SET (Part No.ES 72163)

National – Multi-Purpose Seal (Part No.5174)

Crown Auto Jeep Replacmnt – 4.0L/ 4.2L Engines, Silicone Rubber (Part No.53007568)

Omix – Cylinder Head Gasket; 3.8L/4.2L; 72-80 Jeep CJ Models (Part No.17446.04)

Felpro – Engine Valve Cover Camshaft Bore Plug (Part No.ES 72357)

Crown Auto Jeep Replacmnt – Cam Bolt/ Cam Washer (Part No.6504238)

Melling – Engine Oil Priming Tool (Part No.MPL-201)

Felpro – Shaft Repair Sleeve (Part No.16224)

Crown Auto Jeep Replacmnt – OE Replacement, With Pan/ Gasket (Part No.53010340K)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50599 R)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.53010624AC)

NTK – Engine Crankshaft Position Sensor (Part No.EH0249)

Crown Auto Jeep Replacmnt – Dana 35/44, OE Replacement, Single (Part No.5083669AA)

Crown Auto Jeep Replacmnt – OILPUMPPICKUPTBORING (Part No.4338942)

Imperial – Econo-Kool® Engine Oil Cooler (Part No.240459)

MAHLE Original – Head Set (Part No.HS5713A)

Omix – Timing Chain; 3.0L/4.2L; 72-90 Jeep CJ/Wrangler YJ (Part No.17453.08)

Dayco – Timing Component Kit; With Camshaft Belt Tensioner And Idler, 2 Piece Set (Part No.84102)

Spartan – Engine Cylinder Head; Chry 3.3/3.8 01-11 Cyl Head (Part No.2DA3)

Melling – Stock Replacement OE Type Oil Pump (Part No.M346)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40578)

Dayco – Timing Water Pump Kit; With Pump, Belt and Pulleys (Part No.WP265K4A)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 93220)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 97205)

Felpro – Engine Camshaft Seal Kit (Part No.TCS 45961)

Dayco – Timing Component Kit; With Camshaft Belt Tensioner And Idler, 2 Piece Set (Part No.84102)

Dayco – Timing Water Pump Kit; With Pump, Belt and Pulleys (Part No.WP265K4A)

Dayco – Premium Timing Belt, 54.77 Inch With 146 Round Tooth (Part No.95265)

Dorman – Timing Cover Kit – Includes Gasket (Part No.635-409)

Carquest – Electrical Connector (Part No.PT914)

Dayco – Timing Belt Kit With Components And Belt, Dayco (Part No.95265K4)

Crown Auto Jeep Replacmnt – Non Adjustable, With Sprockets/ Chain/ Guide/ Gaskets (Part No.53020444KL)

Cloyes Gear – Engine Timing Set (Part No.C-3225)

Cloyes Gear – Engine Timing Chain (Part No.C385)

Omix – TimingSet (Part No.17452.19)

Omix – Guide Chain; 150CI/242CI; 84-90 Jeep Cherokee XJ (Part No.17453.70)

INA US – ENGTMNGBLTTNSHYD ASY (Part No.ZT-9-5499)

Dayco – TIMING CHAIN KIT (Part No.KTC1417)

INA US – ENG TIMNG BELT IDLER (Part No.ZP-9-5542)

Cloyes Gear – Engine Balance Shaft Chain Kit (Part No.9-4191SA)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S822T)

Cloyes Gear – Engine Balance Shaft Chain (Part No.9-4191)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S809)

Cloyes Gear – Engine Balance Shaft Sprocket (Part No.S642)

INA US – ENG TIMNG CHAINGUIDE (Part No.ZG-9-5337)

Cloyes Gear – Engine Balance Shaft Chain Guide (Part No.9-5297)

FAG US – General Seal (Part No.SS2412)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S803)

Dorman – Camshaft Synchronizer with Sensor Drives Oil Pump (OE Fix) (Part No.689-201)

Carquest – Engine Crankshaft Position Sensor (Part No.35A1017)

Carquest Premium – Multi-Use Connector (Part No.PTA1055)

Carquest Premium – Multi-Purpose Sensor (Part No.CSC1049)

Carquest Premium – Camshaft Sensor (Part No.CSC1274)

National – Multi Purpose Seal (Part No.320249)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1554)

Felpro – Engine Valve Cover Camshaft Bore Plug (Part No.ES 72357)

Sealed Power – Engine Camshaft Bearing Set (Part No.1921M)

Dorman – Magnetic Camshaft Position Sensor (Part No.907-747)

National – Shaft Repair Sleeve (Part No.99179)

Crown Auto Jeep Replacmnt – Cam Bolt/ Cam Washer (Part No.6504238)

Driveworks – Camshaft Seal (Part No.S-320249)

Sealed Power – Engine Push Rod (Part No.RP-3275)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26211 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26202 PT)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71102)

MAHLE Original – Head Set (Part No.HS5713A)

Sealed Power – Engine Valve Lifter (Part No.HT-2011)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 71028)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26202 PT-3)

Dorman – Valve Covers: with Gasket, Direct Replacement, Stamped Steel (Part No.264-983)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 73026)

Sealed Power – Engine Valve Lifter (Part No.HT-2278)

Sealed Power – Engine Rocker Arm Bridge (Part No.MR-1840)

Crown Auto Jeep Replacmnt – OE Replacement (Part No.J8120512)

Omix – Rocker Arm Pivot; 72-06 Jeep CJ/Wrangler YJ/TJ (Part No.17408.10)