from

$164.99

The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

from

$326.99

Diesel engine idling rough, misfiring or stalling? This replacement injector control pressure sensor matches the fit and function of the original equipment sensor to ensure the control module receives accurate information for smooth running.

Product Features:

Direct replacement – this diesel injector control pressure (IPC) sensor matches the fit, function and performance of the original equipment sensor
Reliable construction – this IPC sensor is built from quality components to deliver an accurate signal to the ECM
Easy installation – this sensor features a factory-style electrical connector
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$184.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$71.99

This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.

Product Features:

Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$38.99

This fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel pressure regulator service kit is designed to match the original hardware required to repair the fuel injectors on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$613.99

This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles
Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$778.99

This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles
Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
Durable construction – made from quality components to ensure reliable performance and long service life
Quality assured – backed by a team of product engineers based in the United States

from

$73.99

This EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles, and is engineered for durability.

Product Features:

Direct replacement – this EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles
Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gaskets fail
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$38.49

This EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles, and is engineered for durability.

Product Features:

Direct replacement – this EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles
Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gaskets fail
Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$14.99

The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:

Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$1161.99

100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part.

Product Features:

100% O-ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$796.99

Product Features:

Each unit is 100% tested to OE specifications
Includes all new premium quality o-rings and seals
Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation

from

$387.99

CARDONE Remanufactured Fuel Injectors provide an alternative plug and play solution to fuel delivery for diesel applications. All units are flow tested and balanced and replaced with new O-rings and gaskets. Each unit retains OEM duty cycle and pulse width ensuring reliable performance. All units are built to meet or exceed OEM performance, providing a quality product both you and your vehicle can rely on.

Product Features:

All gaskets, O-rings and bearings are replaced 100% to ensure optimal performance
Each assembled unit is individually calibrated and tested to ensure it meets or exceeds O.E.M. form, fit and function
All components are renewed or replaced as necessary to ensure high quality and durability
When applicable, improvements based on typical failure modes of original units are incorporated into the design and manufacture of replacement component parts, which translates into longer service life and less down-time for the driver
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$31.49

This diesel primer pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this diesel primer pump is designed to match the fit and function of the original pump on specified applications
Restores functionality – reliable replacement for an original pump that has failed, causing hard or no-start conditions
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$187.99

This diesel primer pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this diesel primer pump is designed to match the fit and function of the original pump on specified applications
Restores functionality – reliable replacement for an original pump that has failed, causing hard or no-start conditions
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$124.99

Tight seals are essential to proper EGR cooler operation. This EGR cooler gasket kit contains all the gaskets and seals required to ensure a solid repair. Made of quality materials, this kit is a direct replacement for original equipment parts.

Product Features:

Direct replacement – this exhaust gas recirculation (EGR) gasket kit matches the original equipment gaskets for this vehicle application
Durable construction – the components in this EGR cooler gasket kit are made of quality materials for a secure fit and excellent durability
Convenient solution – the gaskets in this kit should be replaced whenever repairs are performed on the EGR cooler, intake manifold or oil cooler
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$3201.99

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$54.99

This EGR cooler hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this EGR cooler hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to heat or vibration
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$403.99

This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:

Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications
Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$217.99

This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future

from

$224.05

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

Allows you to replace only faulty power supply instead of entire fuel injection control module assembly
100% new, not remanufactured, so there’s no leftover debris that may cause failure
Re-engineered circuit board layout
Higher-quality electronics protect critical components from excess heat that can lead to failure

2006 IC Corporation CE Commercial Fuel and Emissions Systems

More 2006 IC Corporation CE Commercial Fuel and Emissions Systems Categories

Essential 2006 IC Corporation CE Commercial Fuel and Emissions Systems

Carquest Premium – Diesel Injection Control Pressure Sensor (Part No.HMA1005K)

Dorman – HD Solutions – Diesel Injection Control Pressure Sensor (Part No.904-7519)

Dorman – HD Solutions – Heavy Duty Fuel Level Sensor / Fuel Sender (Part No.285-5108)

Dorman – HD Solutions – Manifold Absolute Pressure Sensor (Part No.904-7525)

Dorman – Fuel Pressure Regulator Upgrade Kit (Part No.904-490)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Valve (Part No.904-5062)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Valve (Part No.904-5056)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Valve Gasket Kit (Part No.904-5162)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Valve Gasket Kit (Part No.904-5156)

Carquest Premium – Injector Seal Kit (Part No.AC20662)

Dorman – Diesel Fuel Injector O-ring Kit (Part No.904-206)

Delphi – Fuel Injector (Part No.EX638489)

Carquest Premium – Remanufactured Fuel Injector (Part No.AD85121)

Cardone – Fuel Injector (Part No.2J-201)

Dorman – HD Solutions – Fuel Primer Pump (Part No.904-7925)

Dorman – HD Solutions – Fuel Primer Pump Repair Kit (Part No.904-7937)

Dorman – EGR Cooler/Intake Gasket Kit (Part No.904-265)

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Cooler Kit (Part No.904-5022)

Dorman – EGR Cooler Water Outlet from Oil Cooler Water Outlet Adaptor Hose (Part No.904-199)

Dorman – Exhaust Gas Recirculation Cooler Kit (Part No.904-218)

Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (Part No.904-229)

Tech Smart – Fuel Injector Control Module (Part No.R76001)

Popular 2006 IC Corporation CE Commercial Fuel and Emissions Systems Categories

2006 IC Corporation CE Commercial Fuel and Emissions Systems

Top-Rated Fuel and Emissions Systems Brands For Your 2006 IC Corporation CE Commercial

Popular Tech Smart Fuel and Emissions Systems

Top-Rated Dorman Fuel and Emissions Systems

FAQs for 2006 IC Corporation CE Commercial Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the 2006 IC Corporation CE Commercial?