2006 Hyundai Sonata Belts and Hoses

Name: Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 20.4mm Width, 4 Grooves
Brand: Dayco
SKU: 89050
Price: 37.99 USD

Below you will find various in-demand Hyundai Belts and Hoses, components and accessories for your 2006 Sonata. Advance Auto Parts has popular Sonata parts like Fuel Hoses, Engine Cooling Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other Sonata model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2006 Hyundai Sonata Belts and Hoses below and start saving instantly.

Popular 2006 Hyundai Sonata Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Fuel Injection Air Flow Meter Hoses

Essential Belts and Hoses for 2006 Hyundai Sonatas

from

$37.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$25.99

The INA Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

from

$254.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$234.99

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$32.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$39.82

ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$84.99

This Litens supplied pulley is manufactured by the original equipment (O.E.) manufacturer. This part is specifically designed for Hyundai / Kia applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Heavy duty steel pulley construction
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
Installation instructions included

from

$30.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$158.99

This Litens supplied tensioner is manufactured by the original equipment (O.E.) manufacturer. This part is specifically designed for Hyundai / Kia applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$194.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Meets or exceeds OE quality

from

$12.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.63

Radiator Hose

from

$4.99

Dayco engineered to conform to high mileage, worn or misaligned drives without a sacrifice in quiet, long-lasting performance. Constructed with Aramid reinforced EPDM compounds, it delivers more than OE required quality… it delivers the solution to troublesome drive problems. Dayco Poly-Rib Belts meet or exceed SAE J1459 and SAE J2432 specifications.

Product Features:

Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
No-Noise Advanced Design EPDM rubber compound for quiet extended life

from

$31.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resists oil, heat, ozone, weather and aging for improved belt life
Meets or exceeds SAE J636C specifications

from

$42.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$38.26

Has a heat and ozone resistant cover to increase the life of the hose
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles

from

$87.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$31.19

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

from

$1.79

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time
Similar to SAE 20R3 Class D-3
Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.

from

$0.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$13.49

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$33.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$18.79

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$37.99

Dayco ela (elastic) or stretch belts are specifically designed for two, three, and four point drives that are designed to use self-tensioning belts. Although these belts may look like standard poly rib belts, they are very different. These specially designed elastic belts have self-tensioning capabilities required by specific OE drives. Vehicles that are manufactured with stretch belts must replace them with stretch belts. These belts are not interchangeable with standard constructed belts of their same size. Dayco ela belts utilize a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt. The backbone behind the Dayco ela belt is its specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive. This belt construction incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. Stretch belts have unique installation instructions depending on the OE application. Installation may require a specialized tool for the application or a simple zip tie. Do not attempt to install by prying the belt on the pulleys. Dayco provides detailed instructions on the reverse side of the sleeve.

Product Features:

Utilizes a proprietary EPDM construction that is designed to elongate over the fixed pulley system, and then maintain the required belt tension over the life of the belt
Specially developed polyamide tensile member, which allows for high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive
Incorporates a wear resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance
These specially designed elastic belts have self-tensioning capabilities required by specific OE drives designed for a stretch belt

from

$35.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$30.49

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Upgrade your 2006 Hyundai Sonata with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2006 Hyundai Sonata, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Hyundai or enhancing its overall performance, Belts and Hoses are key to keeping your Sonata functioning at its best. At Advance Auto Parts, we offer a wide selection of 45 Belts and Hoses for the 2006 Hyundai Sonata, designed to meet your needs without breaking the bank. From Fuel Hose replacements to Engine Cooling Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2006 Hyundai Sonata at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $499.99, with an average price of $76.38. Our 45 Belts and Hoses in stock come from 14 trusted brands, so you’re sure to find the right part for your 2006 Hyundai Sonata without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Hyundai Sonata, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $15.79 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $29.99, and at an average 5 stars rating. With 616 customer reviews and counting, our 2006 Hyundai Sonata Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Hyundai Sonata is always ready to roll. We’re committed to providing you with everything you need to keep your Sonata in top shape, all in one place. Start shopping confidently below for your 2006 Hyundai Sonata!

Best-Selling Fuel Hoses for 2006 Hyundai Sonatas

Enhance the driving experience in your Hyundai with 1 quality Fuel Hose components, starting at $94.94.

show more show less

from

$94.94

Air Mass Meter Boot

Most Popular 2006 Hyundai Sonata Engine Cooling Hoses

Customize your Hyundai with 9 Engine Cooling Hoses products like Upper Radiator Hoses and Lower Radiator Hoses, all priced under $35.99.

show more show less

from

$35.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$33.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$33.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$35.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$31.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$20.71

Radiator Hose

from

$20.29

MacKay utilizes leading edge rubber technology and compounds, supported by in-house processes from rubber mixing to final product. This ensures hoses are made to the strict specifications required for the advanced motor vehicles of the 21st century. In vehicles of today, a hose has to be designed to withstand the stresses of modern, more compact but powerful engines that run hotter and at a higher pressure. Other factors include smaller engine compartments with poor heat dissipation, aggressive coolant additives, and stray (electrochemical) current that may be conducting through the cooling system. In short, the smaller but more powerful engines of today work a lot harder than the larger engines that were standard before. More heat is generated, higher burst pressures are required in cooling system components, and hoses have to be made tougher to withstand these demands. MacKay’s research and development chemists have developed new rubber formulations and manufacturing processes that ensure MacKay hoses meet the greater wear and heat demands created by modern engines. Rubber compounds used in automotive hoses today are predominantly synthetic rubber formulation. All MacKay coolant hoses are made from EPDM compounds that are highly resistant to ozone attack. Hoses made from some other rubber compounds may be subject to ozone deterioration.

Product Features:

Excellent resistance to high temperatures
Resists chemical attack (oils, fuels etc.)
Excellent Ozone resistance
Good resistance to abrasion
High resistance to vibration

from

$18.20

Radiator Hose

from

$15.90

Radiator Hose

Top Picks for 2006 Hyundai Sonata Serpentine and V Belts

Upgrade Hyundai Sonatas with top-quality Serpentine and V Belts parts, including 11 OEM and aftermarket selections for your 2006 model.

show more show less

from

$59.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$254.99

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$44.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$40.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$31.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$24.99

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$70.75

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$55.79

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$63.61

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$52.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$48.69

Drive Belt

In-Demand Heater Hoses for 2006 Hyundai Sonatas

Select from 3 premium Heater Hoses parts for your 2006 Hyundai Sonata, with prices ranging from $15.79 to $39.99.

show more show less

from

$39.99

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$15.79

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$27.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

Most Sold 2006 Hyundai Sonata Belt Tensioners

Explore our best-selling Hyundai parts for the 2006 Sonata among 7 OEM and aftermarket options starting from $134.99.

show more show less

from

$264.99

This Litens belt tensioner is supplied by the original equipment (O.E.) tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the original equipment part, this replacement tensioner is manufactured in Korea for Kia and Hyundai applications. The aftermarket part maintains the O.E. specified hydraulic actuator, high performance polymer pulley, and the integrated lift feature for ease of installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Hydraulic tension activator
Installation instructions included.
Heavy Duty/Light Weight Polymer Pulley with cap.
Professional Mechanics will change this tensioner in approx. 45 minutes
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$145.99

This Litens belt tensioner is supplied by the original equipment tensioner supplier and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The part is supplied with the pulley removed since the tensioner mounting bolt is located under the pulley. A new mounting bolt is supplied with the tensioner for ease of installation. New mounting bolt included. Specifically produced for Hyundai/Kia vehicles with a 4-Cyl. 2.4L (Theta Eng. FF) Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Mounting Bolt included.
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$194.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Meets or exceeds OE quality

from

$499.99

ACC. BELT TENSIONER

from

$267.59

Acc. Belt Tensioner

from

$217.99

This accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles. It is engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue.

Product Features:

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$134.99

Direct replacement – this accessory drive belt tensioner assembly is designed to match the fit of an original equipment assembly on specified vehicles.
Ideal solution – engineered to help ensure proper belt tension when an original belt is slipping, broken, or worn from fatigue
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Top-Rated Belts and Hoses Brands For Your 2006 Hyundai Sonata

Shop for the best-rated brands offering Belts and Hoses and other products for your 2006 Hyundai Sonatas. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2006 Sonata start at just $15.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2006 Hyundai Sonata Belts and Hoses

When it comes to maintaining or upgrading your 2006 Hyundai Sonata, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2006 Hyundai Sonata. With over 17 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.79, with an average price of just $53.67. Plus, with over 196 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$26.68

This product is not rated

Dayco, Acc. Belt Idler Pulley, 27mm wide x 70mm OD

“”

from
$194.99

This product is not rated

Serpentine Belt Tensioner; 1 Piece, HD Cast Aluminum Case, Meets Or Exceeds OE

“”

from
$33.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.25" Diameter

“”

Popular Litens 2006 Hyundai Sonata Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2006 Hyundai Sonata owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2006 Sonata, Advance Auto Parts carries a full inventory of 6 Litens Belts and Hoses. Plus you will be keeping your Hyundai in peak condition while saving money because prices on these Litens Belts and Hoses range from $29.99 to $264.99, plus, with more than 28 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$49.49

(3)

Idler Pulley: Direct Fit, Steel, 70mm Diameter

“Buying online was an easy experience, easy to do and part was ready for pick up as promised. Part is of high quality and looks like it will work well.”

from
$84.99

This product is not rated

Tensioner Pulley: Direct Fit, Steel, 65mm Diameter

“”

from
$62.99

(5)

Idler Pulley: Direct Fit, Steel, 70mm Diameter

“Fit as expected”

FAQs for 2006 Hyundai Sonata Belts and Hoses

Which Belts and Hoses are best-sellers for 2006 Hyundai Sonatas?

Out of 45 Belts and Hoses that fit 2006 Hyundai Sonatas, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (10457737) – $29.99
Poly Rib Belt Serpentine Belt; 102 Long, 6 Rib Count (5065178) – $40.99
Poly Rib Belt Serpentine Belt; 97.5 Long, 6 Rib Count (3350001) – $31.99

What’s the price range for 2006 Hyundai Sonata Belts and Hoses?

Belts and Hose prices for the 2006 Hyundai Sonata start at $1.79 and go up to $499.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2006 Hyundai Sonata?

The average price for Belts and Hoses for the 2006 Hyundai Sonata is $76.38. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Hyundai Sonata model years?

Yes, we currently carry Belts and Hoses for 34 model years of Hyundai Sonatas between 1989 and 2023. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Belts and Hoses for my 2006 Hyundai Sonata?

The cheapest 2006 Hyundai Sonata Belts and Hoses we carry in stock are:

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (10504876) – $1.79
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 1/4 Inch Length (15590033) – $15.79
Radiator Hose (11947657) – $15.90
Radiator Hose (11947721) – $18.20
Molded Radiator Hose (11941579) – $20.29

What are the top-rated Belts and Hoses that fit the 2006 Hyundai Sonata?

Out of 616 reviews by customers, our 2006 Hyundai Sonata Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2006 Hyundai Sonata and their top-rated products:

Belt Tensioners
- Accessory Drive Belt Tensioner – Original Equipment Quality (10267303) – $264.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10150820) – $145.99
Serpentine and V Belts
- Accessory Drive Belt Tensioner – Original Equipment Quality (10267303) – $264.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10150820) – $145.99
Radiator Hoses
- Accessory Drive Belt Tensioner – Original Equipment Quality (10267303) – $264.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10150820) – $145.99

What types of Belts and Hoses do you sell for my 2006 Hyundai Sonata?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2006 Hyundai Sonata:

Can I get help with 2006 Hyundai Sonata Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Hyundai Belts and Hoses and more.

What is your return policy for Hyundai Sonata Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Hyundai Sonata Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Hyundai Sonata Belts and Hoses

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 70mm Dia., 20.4mm Width, 4 Grooves (Part No.89050)

INA – Accessory Belt Idler Pulley (Part No.G6020449227INA)

Dayco – Serpentine Belt Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.5060975K1)

Dayco – Serpentine Belt Kit; With Belt, 2 Pulleys, and Tensioner, 4 Piece Set (Part No.5060840K3)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 21" Long, 1.38" Diameter (Part No.E72101)

ACDelco – Professional Molded Coolant Hose (Part No.G2000576633ACD)

Litens – Tensioner Pulley: Direct Fit, Steel, 65mm Diameter (Part No.900713A)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 82 mm Diameter, 26 mm Smooth (Part No.89010)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999692A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD Cast Aluminum Case, Meets Or Exceeds OE (Part No.89654)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 15" Long, 1.25" Diameter (Part No.C71127)

Dayco – Radiator Hose (Part No.G2000403221DAY)

Driveworks – Poly Rib Belt Serpentine Belt; 91.54 Long, 6 Rib Count (Part No.38517)

Gates – Automotive XL« High Capacity V-Belt (Part No.9380)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 23.5" Long, 1.38" Diameter (Part No.E72442)

ACDelco – Professional Molded Coolant Hose (Part No.G2000576641ACD)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 90mm Dia., mm Width, 5 Grooves (Part No.89543)

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221093DAY)

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.25" Inside Diameter (Sold by foot) (Part No.28407)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 10 1/2 Inch Length (Part No.88492)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 21 1/4 Inch Length (Part No.87792)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.80404)

Dayco – Ela Poly Rib Belt (Part No.E030301)

Driveworks – Poly Rib Belt Serpentine Belt; 84 Long, 6 Rib Count (Part No.840K6)

Gates – Micro-V« Serpentine Drive Belt (Part No.K050435)

Original Equipment – Air Mass Meter Boot (Part No.B3132275582OEA)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 18.5" Long, 1.34" Diameter (Part No.E72443)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.25" Diameter (Part No.E72285)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 1.44" Diameter (Part No.E72474)

Gates – Premium Molded Coolant Hose (Part No.23148)

Gates – Premium Molded Coolant Hose (Part No.23147)

Dayco – Radiator Hose (Part No.G2000185236DAY)

MacKay – Molded Radiator Hose (Part No.G2000185236MKY)

Dayco – Radiator Hose (Part No.G2000185235DAY)

Dayco – Radiator Hose (Part No.G2000185234DAY)

Dayco – Poly Rib Belt Serpentine Belt; 102 Long, 6 Rib Count (Part No.5061020)

Dayco – Serpentine Belt Kit; With Belt, Pulley and Tensioner, 3 Piece Set (Part No.5060975K1)

Dayco – Poly Rib Belt Serpentine Belt; 97.5 Long, 6 Rib Count (Part No.5060975)

Driveworks – Poly Rib Belt Serpentine Belt; 102 Long, 6 Rib Count (Part No.1020K6)

Driveworks – Poly Rib Belt Serpentine Belt; 97.5 Long, 6 Rib Count (Part No.975K6)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000578724ACD)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100060969CON)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W100081304CON)

Gates – Micro-V« Serpentine Drive Belt (Part No.K061016)

Bando – Drive Belt (Part No.W10002440797BAN)

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 9 Inch Length (Part No.86106)

Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 16 1/4 Inch Length (Part No.88356)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 14 Inch Length (Part No.87762)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999339A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999220A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD Cast Aluminum Case, Meets Or Exceeds OE (Part No.89654)

Worldpac – ACC. BELT TENSIONER (Part No.G60014216556BAN)

ACKOJA – Acc. Belt Tensioner (Part No.G6001234917ACK)

Dorman – Automatic Belt Tensioner (Tensioner Only) (Part No.419-004)

Dorman – AUTO BELT TENSIONER (Part No.419-327)