2006 Freightliner Classic Radiator Hoses

Essential 2006 Freightliner Classic Radiator Hoses

Gates – Green Stripe« Heavy-Duty Straight Heater Hose (Part No.28442)

Green Stripe« Heavy-Duty Straight Heater Hose

from

$6.49
Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:
  • Green Stripe construction provides best cost-per-mile economics
  • Abrasion-resistant cover
  • Engineered with materials to resist electrochemical degradation
  • Reduces water loss from water permeating the hose wall and cover
  • Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
  • Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
  • Note: For a maintenance free connection, use PowerGrip SB clamps
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More
View Product

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.21194)

Premium Molded Coolant Hose

from

$38.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Gates – Premium Molded Coolant Hose (Part No.21042)

Premium Molded Coolant Hose

from

$42.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation, the leading cause of hose failure
  • Pre-shaped to fit and to ensure perfectly sealed conditions
  • EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
  • Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
  • Caution: Do not use for fuel or oil transfer applications
See More
View Product

Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 3 1/2 Inch Inner Dia. (Sold by inch) (Part No.77350GL)

Straight Radiator Hoses; EPDM Rubber, HD, 3 1/2 Inch Inner Dia. (Sold by inch)

from

$3.79
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Not suitable for fuel or oil transfer
  • PLEASE NOTE: Priced and sold by inch. See store for details.
See More
View Product

Gates – Molded Coolant Hose (Part No.23014)

Molded Coolant Hose

from

$52.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
  • Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
See More
View Product

Gates – Molded Coolant Hose (Part No.24047)

Molded Coolant Hose

from

$29.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
  • Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
See More
View Product

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 3" Diameter (Part No.D70870)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 3" Diameter

from

$40.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More
View Product

2006 Freightliner Classic Radiator Hoses

Maybe you’re in the middle of a full rebuild of that 2006 Freightliner Classic. Maybe you just need a couple of Radiator Hoses. Either way, Advance Auto Parts has 4 different Radiator Hoses in our inventory ranging from $3.99 to $192.99. That means you can find the exact parts or products you need to keep that 2006 Freightliner Classic running smoothly.

Radiator Hoses are only as good as their brand. We stock 1 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Freightliner Classic. Gates are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Radiator Hoses for your 2006 Freightliner Classic, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Radiator Hoses to keep your 2006 Freightliner Classic rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Radiator Hoses Brands To Make Your 2006 Freightliner Classic Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Freightliner Classic demands trusted brand parts and products to keep it running. Many trusted brands of Radiator Hoses make up Advance Auto Parts’ inventory, and all are ready to help make your Classic the best it can be. Be sure to browse some of our top Radiator Hoses brands and parts.

More Popular Parts for All Makes