2006 Chevrolet Uplander Heater Hoses
More 2006 Chevrolet Uplander Heater Hoses
Find your specific 2006 Chevrolet Uplander original or aftermarket Heater Hoses below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 2006 Chevrolet Uplander Heater Hoses
Gates – Premium Molded Heater Hose (Part No.18453)
from
$20.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dorman – Molded Heater Hose: Steel (Part No.626-552)
from
$63.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
Dayco – Molded Small ID Heater Hose (Part No.R3030359234DAY)
from
$13.83
Designed to replace original equipment manufacturer hose, Dayco Molded Heater Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
Product Features:
See More
Product Features:
- Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
- Meets SAE J20R4, Class D-1 requirements for improved service hose
- Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
- Limited Three Year Warranty
Dayco – Molded Small ID Heater Hose (Part No.R3030173858DAY)
from
$8.88
Designed to replace original equipment manufacturer hose, Dayco Molded Heater Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
Product Features:
See More
Product Features:
- Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
- Meets SAE J20R4, Class D-1 requirements for improved service hose
- Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
- Limited Three Year Warranty
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 7 Inch Length (Part No.87603)
from
$27.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Premium Molded Heater Hose (Part No.19026)
from
$6.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)
from
$2.49
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Premium Molded Heater Hose (Part No.19210)
from
$43.99
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Heater Hose (Part No.19190)
from
$42.49
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.87614)
from
$12.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 6 Inch Length (Part No.80400)
from
$18.29
Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- Meets Type EC electro-chemical requirements as specified in SAE J1684
Dorman – Molded Heater Hose: Steel (Part No.626-550)
from
$104.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies
Dorman – Molded Heater Hose: Aluminum/Rubber/Plastic, OE Fix, Upgraded Material (Part No.626-663)
from
$136.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Upgraded material – this replacement engine heater hose assembly features an aluminum T-connector for added durability
- Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
- Complete replacement – hoses come with necessary clamps for easy installation
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Molded Heater Hose: Steel/Rubber, OE Fix, Upgraded Material (Part No.626-638)
from
$105.99
This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
Product Features:
See More
Product Features:
- Upgraded material – this replacement engine heater hose assembly features aluminum T-connectors for added durability
- Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models
- Complete replacement – hoses come with necessary clamps for easy installation
- Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Dorman – Heater Hose Connecto (Part No.R3036947747DOR)
from
$10.36
Heater Hose Connecto
Dorman – Help – Heater Hose Connector (Part No.47994)
from
$9.99
This replacement HVAC heater hose fitting is engineered to match the fit and durability of the stock hose fitting on specified vehicles. It is designed to withstand extreme temperatures to ensure leak-free service.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose fitting directly replaces the original fitting on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperatures and deliver leak-free performance
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Dorman – Heater Hose Connector (Part No.800-411)
from
$14.29
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.
Product Features:
See More
Product Features:
- Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
- Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
- Cost-effective solution – offers original equipment quality at competitive price
- Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Dorman – Help – Heater Hose Connector (Part No.47994CD)
from
$9.99
This replacement HVAC heater hose fitting is engineered to match the fit and durability of the stock hose fitting on specified vehicles. It is designed to withstand extreme temperatures to ensure leak-free service.
Product Features:
See More
Product Features:
- Ideal replacement – this HVAC heater hose fitting directly replaces the original fitting on specified vehicle years, makes and models
- Durable construction – this part is specifically designed to withstand extreme temperatures and deliver leak-free performance
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on testing to ensure a quality fit
Popular 2006 Chevrolet Uplander Heater Hoses Categories
2006 Chevrolet Uplander Heater Hoses
Maybe you’re in the middle of a full rebuild of that 2006 Chevrolet Uplander. Maybe you just need a couple of Heater Hoses. Either way, Advance Auto Parts has 22 different Heater Hoses in our inventory ranging from $1.49 to $145.13. That means you can find the exact parts or products you need to keep that 2006 Chevrolet Uplander running smoothly.
Heater Hoses are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 2006 Chevrolet Uplander. Dayco, Gates, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Heater Hoses for your 2006 Chevrolet Uplander, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Heater Hoses to keep your 2006 Chevrolet Uplander rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Heater Hoses Brands To Make Your 2006 Chevrolet Uplander Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 2006 Chevrolet Uplander demands trusted brand parts and products to keep it running. Many trusted brands of Heater Hoses make up Advance Auto Parts’ inventory, and all are ready to help make your Uplander the best it can be. Be sure to browse some of our top Heater Hoses brands and parts.
Popular Dayco Heater Hoses
We carry Dayco parts in our stock across Heater Hoses categories, plus more. For a 2006 Chevrolet Uplander, our most popular Dayco Heater Hoses include:
FAQs for 2006 Chevrolet Uplander Heater Hoses
What are the most purchased Heater Hoses for the 2006 Chevrolet Uplander?
Out of 22 Heater Hoses for the 2006 Chevrolet Uplander, the most popular in our inventory are:
