2006 Chevrolet Impala Air Intakes

Essential Air Intakes for 2006 Chevrolet Impalas

Carquest – Electrical Connector (Part No.PT978)

Electrical Connector

from

$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Carquest Premium – Barometric Pressure Sensor Connector (Part No.PTA1166)

Barometric Pressure Sensor Connector

from

$17.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Mr. Gasket – Intake Manifold Bolts (Part No.955G)

Intake Manifold Bolts

from

$15.49
These grade 5 socket head bolts are zinc plated for protection and appearance. Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds. Includes twelve (12) 3/8-16 x 1 inch bolts & washers.

Product Features:
  • Grade 5 socket head bolts are zinc plated for protection and appearance
  • Hardened flat washers provide uniform torque & prevent galling on aluminum manifolds
  • Washers Included
See More

Spectre – Bolt Kit Intake Hex Head (Part No.4652)

Bolt Kit Intake Hex Head

from

$9.99
Spectre’s Intake Bolt and Washer Set is engineered to provide premium quality hardware for Chevrolet 265-400 and Chrysler 273-440 small block engines. Measuring 3/8 inch-16 by 1 inch, these grade 5 bolts feature a corrosion resistant zinc-plated finish and hex heads to ensure easy installation. This kit includes 12 bolts and washers.

Product Features:
  • Designed for Chevrolet 265-400 and Chrysler 273-440 small block engines
  • 3/8 inch-16 by 1 inch bolts
  • Kit includes 12 bolts and washers
  • Manufactured from high quality steel
  • Bolts feature hex heads
See More

Hitachi – Electronic Throttle Body: New (Part No.ETB0016)

Electronic Throttle Body: New

from

$272.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:
  • Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
  • Hitachi is a Tier 1 OE supplier for Throttle bodies
  • 100% NEW, never remanufactured
  • Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
  • These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
  • Powerful electric motor provides quick and accurate response for optimal engine efficiency
  • Electronics are sealed to prevent contamination that may result in inaccurate readings
  • Detailed manufacturing tracking system using QR codes
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61024)

Fuel Injection Throttle Body Mounting Gasket

from

$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60903)

Fuel Injection Throttle Body Mounting Gasket

from

$9.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 97240-1)

Engine Intake Manifold Gasket Set

from

$77.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96941)

Engine Intake Manifold Gasket Set

from

$55.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-3109)

Fuel Injection Throttle Body Seal

from

$11.79
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.12639700)

Fuel Injection Throttle Body Seal

from

$30.49
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – Throttle Position Sensor (Part No.213-916)

Throttle Position Sensor

from

$104.99
ACDelco GM Original Equipment Throttle Position Sensors (TPS) are electrical sensors, and are GM-recommended replacements for your vehicle’s original components. They electronically inform the engine control module (ECM) of the throttle’s plate angle or position. These signals are then used to regulate the fuel and ignition system. These original equipment throttle position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Electronically informs the ECM of the throttle valve angle
  • Used to regulate the fuel and ignition system
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Throttle Position Sensor (Part No.ECA1598)

Throttle Position Sensor

from

$44.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Dorman – Engine Air Intake Hose (Part No.696-175)

Engine Air Intake Hose

from

$147.99
This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.

Product Features:
  • Direct replacement – fits and functions like original equipment.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Dorman – Engine Air Intake Hose (Part No.696-728)

Engine Air Intake Hose

from

$89.99
This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.

Product Features:
  • Direct replacement – fits and functions like original equipment.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Carquest Premium – Multi Purpose Connector (Part No.PTA1357)

Multi Purpose Connector

from

$34.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)

Multi-Purpose O-Ring

from

$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Help – Intake Manifold Bolt (Part No.03426)

Intake Manifold Bolt

from

$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.

Product Features:
  • Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body (Part No.C7000405369ACD)

GM Original Equipment Fuel Injection Throttle Body

from

$501.60
The ACDelco GM Original Equipment Fuel Injection Throttle Body is a GM-recommended replacement for your vehicle’s original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. This original equipment fuel injection throttle body has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Hitachi – Electronic Throttle Body (ETB) (Part No.C7000405369HIT)

Electronic Throttle Body (ETB)

from

$283.16
The Hitachi Electronic Throttle Body is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE Manufactured assemblies include Throttle Position sensors
  • Controls the volume of air flowing into the engine
  • Improves engine power, fuel economy and emissions performance
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body (Part No.C7000743095ACD)

GM Original Equipment Fuel Injection Throttle Body

from

$415.66
The ACDelco GM Original Equipment Fuel Injection Throttle Body is a GM-recommended replacement for your vehicle’s original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. This original equipment fuel injection throttle body has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

GM Genuine Parts – Throttle Body: New, Original Equipment (Part No.12670839)

Throttle Body: New, Original Equipment

from

$219.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps provide air flow for proper fuel/air mixture
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Dorman – Electronic Throttle Body (Part No.977-008)

Electronic Throttle Body

from

$281.99
Original equipment throttle bodies often fail from liquid intrusion and excessive wear on internal electronics. This Dorman OE FIX features a non-moving Hall effect sensor and shaft seal to prevent future failures.

Product Features:
  • Upgraded replacement – this electronic throttle body features enhanced internal components to prevent future failures
  • New construction – 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
  • Complete assembly – each unit includes new throttle position sensor for full repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body (Part No.C7000670053ACD)

GM Original Equipment Fuel Injection Throttle Body

from

$282.65
The ACDelco GM Original Equipment Fuel Injection Throttle Body is a GM-recommended replacement for your vehicle’s original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. This original equipment fuel injection throttle body has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Dorman – Electronic Throttle Body (Part No.977-107)

Electronic Throttle Body

from

$243.99
Original equipment throttle bodies often fail when moisture and oil intrusion foul the internal electronics. This Dorman OE FIX throttle body features Dorman Sensor Shield technology, a proprietary butterfly shaft seal to prevent future failures from this contamination.

Product Features:
  • Upgraded design – this Dorman OE FIX throttle body features a proprietary Sensor Shield butterfly shaft seal to prevent future failures
  • New construction – 100% new case aluminum, not remanufactured, for reliability and the convenience of no core charge
  • Rigorously tested – complies with Federal Motor Vehicle Safety Standards (FMVSS) and endurance-proven with over 1 million cycle tests
  • Trustworthy quality – vehicle try-on tested, and backed by a team of product experts in the United States and more than a century of automotive experience
See More

Bosch – Electronic Throttle Body: New, Original Equipment Supplier (Part No.F00H600076)

Electronic Throttle Body: New, Original Equipment Supplier

from

$236.99
OE Throttle Body Assemblies. The throttle body is an essential part of the inlet air stream of the modern gasoline engine. In combination with the electronic throttle control system, the throttle body assembly is designed to control the amount of fresh air entering the engine. Manufactured in U.S.A. on OE production line.

Product Features:
  • Actual OE Product
  • Plug & Play – No flash update needed
  • Exact fit, form, and function
  • Manufactured worldwide on OE production lines
  • Contains an actuator, a throttle plate and a throttle position sensor (potentiometer), which are integrated into one housing
See More

Upgrade your 2006 Chevrolet Impala with Top-Quality Air Intakes

When it comes to maintaining or upgrading your 2006 Chevrolet Impala, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Air Intakes are key to keeping your Impala functioning at its best. At Advance Auto Parts, we offer a wide selection of 31 Air Intakes for the 2006 Chevrolet Impala, designed to meet your needs without breaking the bank. From Throttle Body Part replacements to Air Intake Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Air Intakes for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Air Intakes for your 2006 Chevrolet Impala at great prices. Our Air Intakes inventory for this model ranges from just $3.99 to $501.60, with an average price of $149.26. Our 31 Air Intakes in stock come from 11 trusted brands, so you’re sure to find the right part for your 2006 Chevrolet Impala without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Chevrolet Impala, we stock popular OEM and aftermarket Air Intakes from top names like FELPRO, Hitachi, Dorman, and more. FELPRO Air Intakes start at just $36.99 and boast an impressive 5 stars average rating from customers. Hitachi and Dorman also bring quality to the table, with Air Intakes available starting at $3.99, and at an average 5 stars rating. With 262 customer reviews and counting, our 2006 Chevrolet Impala Air Intakes have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Air Intake upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Chevrolet Impala is always ready to roll. We’re committed to providing you with everything you need to keep your Impala in top shape, all in one place. Start shopping confidently below for your 2006 Chevrolet Impala!

Best-Selling Throttle Body Parts for 2006 Chevrolet Impalas

Enhance the driving experience in your Chevrolet with 9 quality Throttle Body Part components, starting at $242.96.

Tech Smart – Fuel Injection Throttle Body (Part No.S20064)

Fuel Injection Throttle Body

from

$425.05
Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:
  • 100% NEW, never remanufactured, which maximizes performance and extends service life
  • Undergoes extensive testing to ensure quality and reliability out of the box
  • Matches OE response time for peak performance on drive by wire systems
  • All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time
See More

GM Genuine Parts – Electronic Throttle Body: New, Original Equipment (Part No.217-2296)

Electronic Throttle Body: New, Original Equipment

from

$424.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps provide air flow for proper fuel/air mixture
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Cardone – Electric Throttle Body: Remanufactured (Part No.67-3002)

Electric Throttle Body: Remanufactured

from

$281.99
Every CARDONE Remanufactured Electronic Throttle Body undergoes a proprietary disassembly, inspection and renewal process. Each component is meticulously evaluated and then renewed or replaced, depending on whether the component meets our stringent engineering standards. A proprietary cleaning process prevents the throttle bore surface from deformity, ensuring optimum airflow. Every unit is tested for all critical functions, including response time and air flow at multiple points to ensure peak performance.

Product Features:
  • Each unit is disassembled and meticulously inspected. Each component is inspected, remanufactured or replaced resulting in reliable and consistent performance.
  • A specialized component cleaning process prevents the throttle bore surface from being deformed, ensuring optimum air flow.
  • The high and low integrated throttle position sensors are tested to match O.E. characteristics throughout the entire operational range.
  • Final assemblies are tested for all critical functions, including response time and air flow at multiple points.
  • Each unit is guaranteed to function like the original.
  • As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
  • Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
See More

Dorman – Electronic Throttle Body (Part No.977-008)

Electronic Throttle Body

from

$281.99
Original equipment throttle bodies often fail from liquid intrusion and excessive wear on internal electronics. This Dorman OE FIX features a non-moving Hall effect sensor and shaft seal to prevent future failures.

Product Features:
  • Upgraded replacement – this electronic throttle body features enhanced internal components to prevent future failures
  • New construction – 100% new case aluminum, not remanufactured, for reliability and convenience of no core charge
  • Complete assembly – each unit includes new throttle position sensor for full repair
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
See More

GM Genuine Parts – Fuel Injection Throttle Body with Throttle Actuator (Part No.217-3108)

Fuel Injection Throttle Body with Throttle Actuator

from

$405.99
GM Genuine Parts Fuel Injection Throttle Bodies are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These throttle bodies are located on the intake manifold, and contain the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
  • Helps provide air flow for proper fuel/air mixture
  • Allows for a quick throttle response
  • Assists in cold engine starts
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body (Part No.C7000405369ACD)

GM Original Equipment Fuel Injection Throttle Body

from

$501.60
The ACDelco GM Original Equipment Fuel Injection Throttle Body is a GM-recommended replacement for your vehicle’s original component. It is located on the intake manifold, and contains the throttle plate(s) that control the air entering the engine. The throttle body also houses the fuel injector(s) on Throttle Body Injection (TBI) or Central Fuel Injection (CFI) systems. This original equipment fuel injection throttle body has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Pierburg – Electronic Throttle Body (ETB) (Part No.C7000274502APG)

Electronic Throttle Body (ETB)

from

$475.53
The Pierburg Electronic Throttle Body is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE Manufactured assemblies include Throttle Position sensors
  • Controls the volume of air flowing into the engine
  • Improves engine power, fuel economy and emissions performance
See More

Hitachi – Electronic Throttle Body (ETB) (Part No.C7000405369HIT)

Electronic Throttle Body (ETB)

from

$283.16
The Hitachi Electronic Throttle Body is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • OE Manufactured assemblies include Throttle Position sensors
  • Controls the volume of air flowing into the engine
  • Improves engine power, fuel economy and emissions performance
See More

Cardone – FI Throttle Body (Part No.C7000887533CAR)

FI Throttle Body

from

$242.96
FI Throttle Body

Most Popular 2006 Chevrolet Impala Air Intake Hoses

Customize your Chevrolet with 2 Air Intake Hoses products like Air Intake Hoses, all priced under $143.88.

Dorman – Engine Air Intake Hose (Part No.696-728)

Engine Air Intake Hose

from

$89.99
This engine air intake hose was designed as a direct replacement for the original equipment intake hose. Engineered for a perfect fit and easy installation, it includes all necessary fittings. Made of quality materials for a long service life.

Product Features:
  • Direct replacement – fits and functions like original equipment.
  • Quality construction – manufactured from premium materials for a long service life.
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Dorman – Air Mass Meter Intake Hose (Part No.B3100339824DOR)

Air Mass Meter Intake Hose

from

$143.88
Return your air intake system to proper functioning with Dorman’s Air Intake Hose. Constructed of high-quality rubber, the hose resists the drying and cracking that commonly cause check engine lights and drivability issues.

Product Features:
  • Direct replacement for a proper fit every time
  • Designed to accommodate all necessary PCV and emission fittings
  • Hose slides on easily for trouble-free installation
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Top Picks for 2006 Chevrolet Impala Intake Manifold Parts

Upgrade Chevrolet Impalas with top-quality Intake Manifold Parts parts, including 7 OEM and aftermarket selections for your 2006 model.

Felpro – Engine Intake Manifold Bolt Set (Part No.ES 72226)

Engine Intake Manifold Bolt Set

from

$36.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Premium quality parts
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 98015 T)

Engine Intake Manifold Gasket Set

from

$151.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
  • SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
  • EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
  • PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Dorman – Lower & Upper Intake Manifold Gasket Set: 6 Piece Set (Part No.615-725)

Lower & Upper Intake Manifold Gasket Set: 6 Piece Set

from

$61.99
This engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles.

Product Features:
  • Direct replacement – this engine intake manifold gasket set is designed to match the original gaskets required to reseal and restore proper function to the intake manifold on specified vehicles
  • Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gasket fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MIK 98015 T)

INTAKE MANIFOLD GASKET SET

from

$159.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
  • Application specific design to ensure a perfect fit
  • Meets or exceeds all original equipment specifications
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Included all parts needed to complete the repair
  • Included all parts needed to complete the repair
See More

Dorman – Help – Intake Manifold Bolt (Part No.03426)

Intake Manifold Bolt

from

$14.29
Our Intake Manifold Bolt are suitable for a range of applications. Maximum gasket performance is achieved when using new manifold hardware.

Product Features:
  • Direct replacement – this engine intake manifold bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 96941)

Engine Intake Manifold Gasket Set

from

$55.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for repair applications
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Includes all parts needed to complete the repair
  • Includes all parts needed to complete the repair
See More

Mahle – Intake Manifold Gasket Set (Part No.A8043431425MAH)

Intake Manifold Gasket Set

from

$98.59
WARNING: This item cannot be returned for a replacement or refund if opened! Mahle is the largest gasket manufacturer in the world, providing you original equipment design and quality and world class aftermarket service. Mahle does not just cut gaskets – it designs total system sealing approaches that utilize application engineering. This means that regardless of what application you are trying to seal, you can count on Mahle doing the research and testing to provide the optimum material and technology for that specific application – this systems sealing approach requires a variety of materials. No other gasket manufacturer offers the Application Engineered approach to sealing an engine. A variety of different gasket materials insure an engine gets the optimal seal. All gaskets are not created equal – Mahle gaskets prove it every day.

Product Features:
  • Original equipment design and quality
  • Head sets give you original equipment form, fit, and function
  • Utilizes OE equivalent or better materials in all head sets
  • Packaged in shrink wrapped tray
  • Every part you need to complete your gasket repair in one package unless otherwise stated
See More

In-Demand Throttle Bodies & Carb Parts for 2006 Chevrolet Impalas

Select from 11 premium Throttle Bodies & Carb Parts parts for your 2006 Chevrolet Impala, with prices ranging from $4.49 to $272.99.

Hitachi – Electronic Throttle Body: New (Part No.ETB0016)

Electronic Throttle Body: New

from

$272.99
Hitachi’s Electronic Throttle Bodies (ETBs) are designed to provide extraordinary accuracy with quick response times. High quality materials ensure that even under the most extreme conditions, Hitachi’s ETBs will not deform or malfunction. Precision Throttle Position Sensor (TPS) Circuitry maintains accurate engine mapping resulting in optimal fuel economy and performance with the lowest possible emissions. Details such as internal gear sizes, tooth count, materials, and protected circuitry provide a durable and reliable product. Designed to meet the exact needs of each specific vehicle, Hitachi’s electronic throttle bodies are the premium choice.

Product Features:
  • Advanced throttle position sensor technology ensures smooth idle conditions and precise air flow metering
  • Hitachi is a Tier 1 OE supplier for Throttle bodies
  • 100% NEW, never remanufactured
  • Precision TPS Circuitry maintains accurate engine mapping; Pemium componentry allows for extended durability; Tailored for each vehicle to reduce install times.
  • These quality Electronic Throttle Bodies feature precise throttle opening, improved fuel economy and reduced emissions.
  • Powerful electric motor provides quick and accurate response for optimal engine efficiency
  • Electronics are sealed to prevent contamination that may result in inaccurate readings
  • Detailed manufacturing tracking system using QR codes
See More

Carquest – Electrical Connector (Part No.PT978)

Electrical Connector

from

$32.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

ACDelco – Throttle Position Sensor Kit with Clips and Cover (Part No.19300180)

Throttle Position Sensor Kit with Clips and Cover

from

$244.99
ACDelco GM Original Equipment Throttle Position Sensor Kits come with the needed parts to replace your Throttle Position Sensor (TPS), and are GM-recommended replacements for your vehicle’s original components. The TPS reports the throttle position to the engine control module (ECM), which uses the signal to adjust fuel delivery and ignition timing. These original equipment throttle position sensor kits have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Provides information for correct fuel/air mixture
  • Designed to send accurate readings of the position of the throttle valve to the ECM to help provide excellent engine performance
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – Multi Purpose Connector (Part No.PTA1357)

Multi Purpose Connector

from

$34.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-3109)

Fuel Injection Throttle Body Seal

from

$11.79
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

GM Genuine Parts – Fuel Injection Throttle Body Seal (Part No.217-1592)

Fuel Injection Throttle Body Seal

from

$6.29
GM Genuine Parts Fuel Injection Throttle Body Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide an air- and liquid-tight connection between throttle body components, and are GM-recommended replacements for your vehicle’s original components. Replace this seal whenever you service the throttle body. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Helps prevent excess air form entering the intake
  • Helps seal the intake and throttle from the elements
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Carquest Premium – Throttle Position Sensor w/ Hardware (Part No.ECC1089)

Throttle Position Sensor w/ Hardware

from

$259.99
MotoRad Throttle Position Sensors offer precision signaling to the ECM to ensure optimum performance and fuel economy. Manufactured using the highest quality OEM approved materials, resulting in tighter tolerances and increased durability. All MotoRad Throttle Position Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • Manufactured to provide superior sealing, protecting against all engine bay contaminants and insulation from extreme hot and cold temperatures.
  • 100% calibrated and end-of-line tested to ensure worry-free, out-of-the-box performance
  • Designed to meet or exceed all OEM specifications in fit, form & function
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001431212ACD)

GM Original Equipment Fuel Injection Throttle Body Gasket

from

$17.58
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

ACDelco – GM Original Equipment Fuel Injection Throttle Body Gasket (Part No.C7001274503ACD)

GM Original Equipment Fuel Injection Throttle Body Gasket

from

$10.43
The ACDelco GM Original Equipment Fuel Injection Throttle Body Gasket is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Mahle – FI Throttle Body Mou (Part No.C7001274503MAH)

FI Throttle Body Mou

from

$7.36
FI Throttle Body Mou

GM Genuine Parts – Multi-Purpose O-Ring (Part No.24504709)

Multi-Purpose O-Ring

from

$4.49
GM Genuine Parts Multi Purpose O-Rings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

Most Sold 2006 Chevrolet Impala Airboxes

Explore our best-selling Chevrolet parts for the 2006 Impala among 2 OEM and aftermarket options starting from $3.99.

Dorman – GM Bumper Retainer (Part No.961-364D)

GM Bumper Retainer

from

$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Dorman – Nylon Grill Bumper Retainer (Part No.961-364)

Nylon Grill Bumper Retainer

from

$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:
  • Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application.
  • Quality material – this retainer is made of durable material for long-lasting service
  • Versatile design – this retainer is suitable for a variety of automotive uses
  • Excellent value – this part offers original equipment quality at a competitive cost
See More

Top-Rated Air Intakes Brands For Your 2006 Chevrolet Impala

Shop for the best-rated brands offering Air Intakes and other products for your 2006 Chevrolet Impalas. Below you’ll find some of our best rated Air Intakes from FELPRO, Hitachi, and Dorman, and more. Air Intakes from these brands that fit a 2006 Impala start at just $3.99 and are rated as high as 5 stars. OEM and aftermarket Air Intakes don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2006 Chevrolet Impala Air Intakes

When it comes to maintaining or upgrading your 2006 Chevrolet Impala, using quality Air Intakes is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Air Intakes, specifically designed for the 2006 Chevrolet Impala. With over 4 FELPRO brand Air Intakes in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.99, with an average price of just $101.24. Plus, with over 38 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Air Intakes will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Engine Intake Manifold Gasket Set
from
$55.99
This product is not rated

Engine Intake Manifold Gasket Set

“”

INTAKE MANIFOLD GASKET SET
from
$159.99
This product is not rated

INTAKE MANIFOLD GASKET SET

“”

Engine Intake Manifold Bolt Set
from
$36.99

(10)

Engine Intake Manifold Bolt Set

“Exact replacement. Just take your time and recheck the torque cause the thread sealer on the threads can give you a false reading the first time you s”

Popular Hitachi 2006 Chevrolet Impala Air Intakes

Hitachi auto parts is one of the highest quality Air Intake brands in the market. Any 2006 Chevrolet Impala owner should feel confident when installing genuine Hitachi parts in their vehicle. To ensure the best fit and performance for your 2006 Impala, Advance Auto Parts carries a full inventory of 2 Hitachi Air Intakes. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Hitachi Air Intakes range from $272.99 to $283.16, plus, with more than 5 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Air Intakes below will deliver on both quality and value.

Electronic Throttle Body: New
from
$272.99

(5)

Electronic Throttle Body: New

“OEM fit for an function. Separate kit can be found for replace throttle actuator outer assembly but does not replace inner electric motor with will fa”

Electronic Throttle Body (ETB)
from
$283.16
This product is not rated

Electronic Throttle Body (ETB)

“”

FAQs for 2006 Chevrolet Impala Air Intakes

Which Air Intakes are best-sellers for 2006 Chevrolet Impalas?

Out of 31 Air Intakes that fit 2006 Chevrolet Impalas, the following parts are the top sellers:

What’s the price range for 2006 Chevrolet Impala Air Intakes?

Air Intake prices for the 2006 Chevrolet Impala start at $3.99 and go up to $501.60 for the most premium parts.

What’s the average price of a Air Intake for a 2006 Chevrolet Impala?

The average price for Air Intakes for the 2006 Chevrolet Impala is $149.26. Keep in mind the variety of part types within our Air Intake category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Air Intakes for other Chevrolet Impala model years?

Yes, we currently carry Air Intakes for 51 model years of Chevrolet Impalas between 1958 and 2020. Air Intakes are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Air Intakes for my 2006 Chevrolet Impala?

The cheapest 2006 Chevrolet Impala Air Intakes we carry in stock are:

What are the top-rated Air Intakes that fit the 2006 Chevrolet Impala?

Out of 262 reviews by customers, our 2006 Chevrolet Impala Air Intakes have an average customer rating of . These are some of the highest-rated Air Intake types for the 2006 Chevrolet Impala and their top-rated products:

What types of Air Intakes do you sell for my 2006 Chevrolet Impala?

As of 2/5/25, these are some of the most in-demand types of Air Intakes for a 2006 Chevrolet Impala:

Can I get help with 2006 Chevrolet Impala Air Intake orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Air Intakes and more.

What is your return policy for Chevrolet Impala Air Intakes?

Advance Auto Parts keeps returns simple. For new Chevrolet Impala Air Intakes and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.