2006 Cadillac CTS Performance and Racing Products
Find Your Specific 2006 Cadillac CTS Performance and Racing Products
Below you will find various in-demand Cadillac Performance and Racing Products, components and accessories for your 2006 CTS. Advance Auto Parts has popular CTS parts like Performance Exhaust Products, Performance Oil Filters, Programmers and more. You’ll also find aftermarket and OEM Performance and Racing Products for other CTS model years including
2007,
2008,
2009,
2010,
2011,
2012,
2013,
2014,
2015 and more. Select a category of 2006 Cadillac CTS Performance and Racing Products below and start saving instantly.
Popular 2006 Cadillac CTS Performance and Racing Products Categories
Essential Performance and Racing Products for 2006 Cadillac CTSs
K&N – Cold Air Intake: Adds Up To 16 Horsepower, With Washable Air Filter (Part No.63-3084)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)
from
$13.99
High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.
Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
- 281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
- Use Dual Valve Spring part No. 26925-16 with this camshaft
Hays – Flywheel: GM Ls-1 30Lb Steel (Part No.10-730)
from
$527.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Mr. Gasket – Ls1 Late Thermostat (Part No.6367)
from
$37.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.
Product Features:
See More
Product Features:
- Opens sooner than stock at 160 degrees
- High flow design for performance applications
- Includes rubber o-ring seal/gasket
- Incorporates pressure relief valve
Edelbrock – Replacement Water Pump Cartridge for 1997-04 GM LS1/LS6 Gen III (Part No.8897)
from
$244.99
Edelbrock #8897 Water Pump gm gen III ls1 & gen iv ls, replacement insert ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- Replacement Insert
- Service Part
- For Part Number 8896
- Satin Finish
Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)
from
$551.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 6.00 in. Block To Hub Height
- Natural Finish
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-7003)
from
$13.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer’s recommended service intervals.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1017)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N’s Limited Warranty.
Product Features:
See More
Product Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off removal using the welded one-inch hex nut
- High capacity to withstand the service intervals recommended by vehicle manufacturers
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
- Limited Warranty
Product Features:
Competition Cams – Ls Series Valve Train Upgrade Kit With Springs Retainers & Pushrods 1 Ea (Part No.54100)
from
$719.99
COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.
Product Features:
See More
Product Features:
- For GM LS series applications
- includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
- Replaces stock valve train components for more usable horsepower and higher rpm range
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)
from
$491.99
LS Cast Iron Exhaust Manifold
Competition Cams – Steel Retainers, 1.055" For Ls Beehive 1 St (Part No.774-16)
from
$85.99
This 7° steel retainer for GM Gen III applications with #26915 or #26918 Beehive Valve Springs is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.
Product Features:
See More
Product Features:
- 7° angle retainers for 1.055″ diameter valve springs, stock diameter valve stems
- O.D. – 1.030″, Step 1 – .640″
- Precision machined from 4140 chromemoly steel and finished in black oxide
- Designed for positive location when combined with COMP Cams high-quality valve springs
Edelbrock – RPM-Link Adjustable True-Roller Timing Chain Set (Part No.7343)
from
$203.99
Edelbrock part #7343 RPM-Link adjustable true-roller timing chain Set now, you can dial-in your camshaft with ease with our RPM-Link Roller Timing Chain Set. RPM-Link timing chain bolt onto your engine just like any other timing chain set, so there’s no m
Product Features:
See More
Product Features:
- Keyway Adjustable
- Single Roller Timing Chain Type
- Induction Hardened Billet Steel Material
- No Machining Required
- No Special Offset Bushings Needed For Installation
Diablosport – Trinity 2 (Part No.9200)
from
$666.99
Trinity 2
Upgrade your 2006 Cadillac CTS with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2006 Cadillac CTS, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Performance and Racing Products are key to keeping your CTS functioning at its best. At Advance Auto Parts, we offer a wide selection of 39 Performance and Racing Products for the 2006 Cadillac CTS, designed to meet your needs without breaking the bank.
From
Performance Exhaust Product
replacements to
Performance Oil Filters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2006 Cadillac CTS at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $13.99 to $1,870.00, with
an average price of $392.09.
Our 39 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 2006 Cadillac CTS without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Cadillac CTS, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, and more.
K&N Performance and Racing Products
start at just $367.99 and boast an impressive 4.8 stars average rating from customers.
With 6 customer reviews and counting, our 2006 Cadillac CTS Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2006 Cadillac CTS is always ready to roll. We’re committed to providing you with everything you need to keep your CTS in top shape, all in one place.
Start shopping confidently below for your 2006 Cadillac CTS!
Best-Selling Performance Exhaust Products for 2006 Cadillac CTSs
Enhance the driving experience in your Cadillac with 1 quality Performance Exhaust Product components, starting at $491.99.
Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)
from
$491.99
LS Cast Iron Exhaust Manifold
Most Popular 2006 Cadillac CTS Performance Oil Filters
Customize your Cadillac with 1 Performance Oil Filters products
like Performance Oil Filters, all
priced under $13.99.
K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-7003)
from
$13.99
K&N Cartridge Oil Filters are designed to satisfy the needs of racers and engine builders as well as the average vehicle owner who wants the best oil filter available. K&N cartridge oil filters trap harmful contaminants while the filter’s construction allows for high oil flow rates. All K&N oil filters are manufactured to meet stringent engineering standards. They are covered by a limited warranty to be free from defects in materials and workmanship when installed and replaced using engine and equipment manufacturer’s recommended service intervals.
Product Features:
See More
Product Features:
- High performance design for outstanding filtration
- High-efficiency media with uniform pleats
- Allows for high oil flow rates
- Ideal for high-end synthetic motor oil
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Top Picks for 2006 Cadillac CTS Programmers
Upgrade Cadillac CTSs with top-quality Programmers parts, including 1 OEM and aftermarket selections for your 2006 model.
Diablosport – Trinity 2 (Part No.9200)
from
$666.99
Trinity 2
In-Demand Performance Engines for 2006 Cadillac CTSs
Select from 33 premium Performance Engines parts for your 2006 Cadillac CTS, with prices ranging from $13.99 to $1,870.00.
Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
- 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26918-16 with this camshaft
Mr. Gasket – Ls1 Late Thermostat (Part No.6367)
from
$37.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.
Product Features:
See More
Product Features:
- Opens sooner than stock at 160 degrees
- High flow design for performance applications
- Includes rubber o-ring seal/gasket
- Incorporates pressure relief valve
Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
- 281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
- Use Dual Valve Spring part No. 26925-16 with this camshaft
Competition Cams – Steel Retainers, 1.055" For Ls Beehive 1 St (Part No.774-16)
from
$85.99
This 7° steel retainer for GM Gen III applications with #26915 or #26918 Beehive Valve Springs is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.
Product Features:
See More
Product Features:
- 7° angle retainers for 1.055″ diameter valve springs, stock diameter valve stems
- O.D. – 1.030″, Step 1 – .640″
- Precision machined from 4140 chromemoly steel and finished in black oxide
- Designed for positive location when combined with COMP Cams high-quality valve springs
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-412-11)
from
$1870.00
XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-426-11)
from
$1867.00
XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)
from
$1195.00
XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-414-11)
from
$1195.00
XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV
Competition Cams – Ls Series Valve Train Upgrade Kit With Springs Retainers & Pushrods 1 Ea (Part No.54100)
from
$719.99
COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.
Product Features:
See More
Product Features:
- For GM LS series applications
- includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
- Replaces stock valve train components for more usable horsepower and higher rpm range
Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)
from
$551.99
Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- 0.750 in. Pilot Shaft
- 0.750 in. Ball/Ball Bearing
- 6.00 in. Block To Hub Height
- Natural Finish
Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)
from
$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)
from
$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
- 269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
- Use Beehive Valve Spring part No. 26915-16 with this camshaft
Competition Cams – 7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs (Part No.772-16)
from
$506.99
7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs
Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)
from
$399.99
ENGINE ROCKER ARM
Edelbrock – CYL HEAD COMPONENTS (Part No.9708)
from
$339.99
CYL HEAD COMPONENTS
Competition Cams – Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7796-16)
from
$286.99
Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set
Edelbrock – Replacement Water Pump Cartridge for 1997-04 GM LS1/LS6 Gen III (Part No.8897)
from
$244.99
Edelbrock #8897 Water Pump gm gen III ls1 & gen iv ls, replacement insert ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “super
Product Features:
See More
Product Features:
- Standard Impeller Rotation
- Replacement Insert
- Service Part
- For Part Number 8896
- Satin Finish
Edelbrock – RPM-Link Adjustable True-Roller Timing Chain Set (Part No.7343)
from
$203.99
Edelbrock part #7343 RPM-Link adjustable true-roller timing chain Set now, you can dial-in your camshaft with ease with our RPM-Link Roller Timing Chain Set. RPM-Link timing chain bolt onto your engine just like any other timing chain set, so there’s no m
Product Features:
See More
Product Features:
- Keyway Adjustable
- Single Roller Timing Chain Type
- Induction Hardened Billet Steel Material
- No Machining Required
- No Special Offset Bushings Needed For Installation
Competition Cams – ENGINE ROCKER ARM (Part No.19024-1)
from
$72.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1675-1)
from
$62.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)
from
$50.99
ENGINE ROCKER ARM
Most Sold 2006 Cadillac CTS Performance Air Intake Kits
Explore our best-selling Cadillac parts for the 2006 CTS among 2 OEM and aftermarket options starting from $367.99.
K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.57-3042)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 17 Horsepower, With Washable Air Filter (Part No.57-3068)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Top-Rated Performance and Racing Products Brands For Your 2006 Cadillac CTS
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2006 Cadillac CTSs. Below you’ll find some of our best rated Performance and Racing Products from K&N, and more. Performance and Racing Products from these brands that fit a 2006 CTS start at just $367.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2006 Cadillac CTS Performance and Racing Products
When it comes to maintaining or upgrading your 2006 Cadillac CTS, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2006 Cadillac CTS. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $367.99. Plus, with over 2 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$367.99
(2)
Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter
“Definitely have noticed an increase in fuel mileage and it’s quiet but really opens up when you give it some throttle. Nice addition to an older vehic”
FAQs for 2006 Cadillac CTS Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2006 Cadillac CTSs?
Out of 39 Performance and Racing Products that fit 2006 Cadillac CTSs, the following parts are the top sellers:
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (16670017) – $13.99
- Ls1 Late Thermostat (11151861) – $37.99
- XFI XE-R 232/234 Hydraulic Roller Cam (10322175) – $541.99
What’s the price range for 2006 Cadillac CTS Performance and Racing Products?
Performance and Racing Product prices for the 2006 Cadillac CTS start at $13.99 and go up to $1,870.00 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2006 Cadillac CTS?
The average price for Performance and Racing Products for the 2006 Cadillac CTS is $392.09. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Cadillac CTS model years?
What are the cheapest Performance and Racing Products for my 2006 Cadillac CTS?
The cheapest 2006 Cadillac CTS Performance and Racing Products we carry in stock are:
- Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (16670017) – $13.99
- High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (50289526) – $13.99
- Performance Series Solid Lifter for Cadillac, Chevrolet, Oldsmobile and Pontiac (50287860) – $15.99
- Camshaft Lock Plate w/ Bolts for GM LS GEN III/IV with 3 Bolt Camshaft (50288119) – $18.99
- Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod (50289657) – $19.99
What are the top-rated Performance and Racing Products that fit the 2006 Cadillac CTS?
Out of 6 reviews by customers, our 2006 Cadillac CTS Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2006 Cadillac CTS and their top-rated products:
- Performance Air Intake Kits
- Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (22400849) – $367.99
What types of Performance and Racing Products do you sell for my 2006 Cadillac CTS?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2006 Cadillac CTS:
Can I get help with 2006 Cadillac CTS Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Performance and Racing Products and more.
What is your return policy for Cadillac CTS Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Cadillac CTS Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
