2006 Cadillac CTS Body Parts
Find Your Specific 2006 Cadillac CTS Body Parts
Below you will find various in-demand Cadillac Body Parts, components and accessories for your 2006 CTS. Advance Auto Parts has popular CTS parts like Vehicle Latches and Handles, Vehicle Doors, Vehicle Hoods and more. You’ll also find aftermarket and OEM Body Parts for other CTS model years including
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2006 Cadillac CTS Body Parts below and start saving instantly.
Popular 2006 Cadillac CTS Body Parts Categories
Essential Body Parts for 2006 Cadillac CTSs
Dorman – Drive Type Rivet-GM-Hole Size-8.25mm-Diameter 20mm (Part No.963-210)
from
$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Atlas Lift – Lift Support (Part No.LS10400)
from
$30.99
Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE specifications. Always replace in Pairs, where applicable.
- Easy Install – Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance.
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function.
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable.
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal.
- Trilingual Install Instructions provided inside each package
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
ACDelco – 5-Way Female Black Multi-Purpose Pigtail (Part No.PT795)
from
$59.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.79
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Burco – SIDE VIEW MIRROR (Part No.6124)
from
$59.99
Enhance your Cadillac CTS with the Burco 6124 replacement car mirror, the ultimate solution for restoring safety and visibility without breaking the bank. This economical side mirror features a glass-only design, allowing for a cost-saving side mirror replacement that¿s as practical as it is efficient. Installation is a breeze, making DIY mirror replacement a walk in the park¿get back on the road quickly and confidently! With its precise fit and compliance with safety standards, the Burco 6124 enhances your driving experience, ensuring you enjoy a clear view of your surroundings. Don¿t let a cracked mirror compromise your safety; choose the Burco 6124 for the best replacement side mirror that delivers straightforward, satisfying repairs to keep you and your vehicle safe.
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
K-Source – Mirror Assembly: Passenger Side, Power Adjustment, Heated, Foldable, 1 Pk (Part No.62741G)
from
$151.99
Original Equipment Manufacturer Style Replacement Side View Mirror. K Source is a unique manufacturer in that we specialize in making only automotive and motorcycle mirrors. Our experience in this category for over 71 years is exactly what our customers have come to trust and rely upon, as our manufacturing and marketing expertise has consistently led the market in replacement products.
Product Features:
See More
Product Features:
- Passenger side Mirror, tested to fit and function like the original, Meets or exceeds Original Equipment Manufacturer standards
- Mirror glass is power adjustable and heated
- OE-comparable wiring harness/ connection (no “pigtail” connector) for hassle-free installation
- Manual folding for additional clearance
- Black
Carquest Premium – Door Lock Actuator (Part No.DLE2202)
from
$259.99
The Door Lock Actuator is typically an electrical driven device that will remotely operate the vehicles door locks. The actuator may be controlled by a switch inside the vehicle but may also be operated by a controller allowing the vehicle operator to unlock the doors without touching the vehicle using a key fob device.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Dorman – XMAS TREE FSTR (Part No.963-153D)
from
$7.29
XMAS TREE FSTR
Carquest Premium – Multi-Use Connector (Part No.PTA1405)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Bumper Retainer-Exterior-GM (Sold by each) (Part No.700-034)
from
$0.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for Length-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Blind Rivet Retainer-GM-Diameter 3/16 In. (sold by each) (Part No.700-038)
from
$1.29
Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.
Product Features:
See More
Product Features:
- Available in blind, push-in and screw-in styles
- Constructed of high-quality materials for long-lasting durability
- Also suitable for a broad variety of industrial and commercial uses
- Packaged in a variety of piece counts for use with both small and large projects
Dorman – Front Fender Retainer – Honda (sold by each) (Part No.700-626)
from
$1.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for Length-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.751-825)
from
$190.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
- Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
Dorman – Splash Shield Retainer Clips (Part No.961-037)
from
$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Moulding Retainer-Interior-GM (Part No.963-200)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Door Window Switch (Part No.WSC2889)
from
$269.99
Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Door Switch is a versatile component that can control various functions such as door locks, windows, or side mirrors. Whether used for a single function or multiple operations, it offers reliable control and enhances the driver’s convenience. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.
Product Features:
See More
Product Features:
- Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
- Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
- Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
- Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.
KAI – New Standard Replacement Grille, Excludes Cts-V, Without Crest And Wreath (Part No.GM1200616)
from
$193.99
With a Serious and Unwavering Commitment to Providing Customers a Broad Range of High Quality Replacement Components, Equipment, and Parts to Repair and Accessorize Their Automobiles, Trucks, and Other Vehicles, We Are Offering a New Standard Replacement Grille, Excludes Cts-V, Without Crest and Wreath. It is Designed to Replace Your Existing Grille. Check to Be Sure it Fits Your Vehicle.
Product Features:
See More
Product Features:
- Excludes Cts-V, Without Crest And Wreath, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Burco – SIDE VIEW MIRROR W/BLIND SPOT (Part No.5595B)
from
$69.99
Redefine your driving experience with the Burco 5595B replacement side view mirror, the ultimate economical side mirror solution for Cadillac CTS owners. This cost-saving side mirror not only enhances your vehicle’s safety but also ensures you maintain compliance with visibility standards. Designed for quick and straightforward DIY mirror replacement, you¿ll be back on the road in no time, avoiding the frustration of complicated repairs. The built-in Blind Spot icon boosts your confidence while driving, making it a smart choice whether you’re replacing a broken mirror or just updating your ride. Enjoy the perfect blend of quality and affordability with this best replacement side mirror, and don’t let a cracked mirror hold you back¿trust Burco for reliable visibility solutions that make every journey safer and more enjoyable!
Product Features:
See More
Product Features:
- Made in USA
- Exact Fit
- Safety Smooth Edges
- Replaces OE Mirror
- Premium Mirror Glass
- Break-Free Guarantee
- Instructions Included
KAI – Bumper Deflector (Part No.GM1092231)
from
$35.99
New Standard Replacement Front Lower Engine Splash Shield, For 6 Cylinder Cars
Product Features:
See More
Product Features:
- For 6 Cylinder Cars, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Carquest Premium – Multi-Use Connector (Part No.PTA1798)
from
$10.49
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
GM Genuine Parts – 2-Way Male Black Multi-Purpose Pigtail (Part No.PT786)
from
$40.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Help – Exterior Door Handle Front Left (Part No.81313)
from
$72.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)
from
$41.99
Make better electrical repairs and accessory installations with a Dorman pigtail connector. Designed for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.
Product Features:
See More
Product Features:
- Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
- Ensure fit – check the product details to choose the best product for your needs
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
KAI – Fender Liner (Part No.GM1249199)
from
$44.99
New Standard Replacement Passenger Side Fender Liner
Product Features:
See More
Product Features:
- Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.GM1249159)
from
$18.99
New Standard Replacement Passenger Side Fender Liner, Rear Section
Product Features:
See More
Product Features:
- Rear Section, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Help – Interior Door Handle Kit without Power Switch Hole Chrome Lever (Part No.88629)
from
$213.99
Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
AutoCraft – Door Handle, Interior (Part No.81834)
from
$26.99
Needa Parts, a division of the Hillman Group, offers more than 3,000 door handles with coverage from vintage to late model cars, trucks, and vans. Our handles are manufactured to ensure a proper fit and replacement, as well as durability to ensure extended use.
Product Features:
See More
Product Features:
- All parts are a direct OE cross and meet or exceed OEM standards
- Includes spring and clips (where applicable)
- All handles are individually packaged
Upgrade your 2006 Cadillac CTS with Top-Quality Body Parts
When it comes to maintaining or upgrading your 2006 Cadillac CTS, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Cadillac or enhancing its overall performance, Body Parts are key to keeping your CTS functioning at its best. At Advance Auto Parts, we offer a wide selection of 51 Body Parts for the 2006 Cadillac CTS, designed to meet your needs without breaking the bank.
From
Vehicle Latches and Handle
replacements to
Vehicle Doors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Body Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Body Parts for your 2006 Cadillac CTS at great prices.
Our Body Parts inventory for this model
ranges from just $0.79 to $259.99, with
an average price of $56.70.
Our 51 Body Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2006 Cadillac CTS without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Cadillac CTS, we stock popular OEM and aftermarket Body Parts from top names
like StrongArm Dorman, and more.
StrongArm Body Parts
start at just $18.29 and boast an impressive 4.5 stars average rating from customers.
With 47 customer reviews and counting, our 2006 Cadillac CTS Body Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Body Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2006 Cadillac CTS is always ready to roll. We’re committed to providing you with everything you need to keep your CTS in top shape, all in one place.
Start shopping confidently below for your 2006 Cadillac CTS!
Best-Selling Vehicle Latches and Handles for 2006 Cadillac CTSs
Enhance the driving experience in your Cadillac with 3 quality Vehicle Latches and Handle components, starting at $26.99.
Dorman – Help – Exterior Door Handle Front Left (Part No.81313)
from
$72.99
Want a new exterior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement exterior door handle was specifically designed to look and function the same as the original handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Excellent value – original equipment quality at a lower price
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
Dorman – Help – Interior Door Handle (Part No.81832)
from
$31.99
Want a new interior door handle that matches the original, for far less than going back to the dealership- This replacement door handle was engineered to match the fit and appearance of the stock handle on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Matching appearance – this replacement door handle was specifically designed to look and function the same as the original interior handle on particular vehicles
- Seamless replacement – designed to match the dimensions and specifications of the handle that came stock on the vehicle
- Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
- Ensure fit – this handle is vehicle position specific, so double check you have the correct handle for the same position and side of the vehicle you want to replace
AutoCraft – Door Handle, Interior (Part No.81834)
from
$26.99
Needa Parts, a division of the Hillman Group, offers more than 3,000 door handles with coverage from vintage to late model cars, trucks, and vans. Our handles are manufactured to ensure a proper fit and replacement, as well as durability to ensure extended use.
Product Features:
See More
Product Features:
- All parts are a direct OE cross and meet or exceed OEM standards
- Includes spring and clips (where applicable)
- All handles are individually packaged
Most Popular 2006 Cadillac CTS Vehicle Doors
Customize your Cadillac with 8 Vehicle Doors products
like Door Lock Motors,
Door Molding Retainers, and
Remote Control Door Lock Receiver Connectors, all
priced under $259.99.
Dorman – Pigtail -Evap. Canister Vent Valve Solenoid, Red, 2-way with Leads (Part No.645-631)
from
$41.99
Make better electrical repairs and accessory installations with a Dorman pigtail connector. Designed for a clean appearance when installed, Dorman connectors are ideal for neatly securing wiring jobs in automotive, commercial, industrial and household applications. Our pigtails are constructed from quality materials for long service life and resistance to the elements, and offer a range of features including locking tabs, weatherproof seals and more, where applicable. Check the product details to choose the best product for your electrical wiring needs.
Product Features:
See More
Product Features:
- Ideal solution – this pigtail connector is designed to neatly connect to an idle control valve on specified vehicles
- Ensure fit – check the product details to choose the best product for your needs
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Dorman – Rivet-Push In-Hole Diameter .500 In-Head Diameter 1 In-Length .900 In (Part No.45813)
from
$1.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Multi-Use Connector (Part No.PTA1405)
from
$41.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
ACDelco – 5-Way Female Black Multi-Purpose Pigtail (Part No.PT795)
from
$59.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Rivet-Push In-Hole Diameter .500"-Head Diameter 1"-Length .900 In (Sold by each) (Part No.700-575)
from
$2.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Carquest Premium – Door Lock Actuator (Part No.DLE2202)
from
$259.99
The Door Lock Actuator is typically an electrical driven device that will remotely operate the vehicles door locks. The actuator may be controlled by a switch inside the vehicle but may also be operated by a controller allowing the vehicle operator to unlock the doors without touching the vehicle using a key fob device.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Door Lock Actuator (Part No.DLC2221)
from
$158.99
The Door Lock Actuator is typically an electrical driven device that will remotely operate the vehicles door locks. The actuator may be controlled by a switch inside the vehicle but may also be operated by a controller allowing the vehicle operator to unlock the doors without touching the vehicle using a key fob device.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
- 100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
- 100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
- Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
- Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
- Where applicable electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Carquest Premium – Multi-Use Connector (Part No.PTA1798)
from
$10.49
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Top Picks for 2006 Cadillac CTS Vehicle Hoods
Upgrade Cadillac CTSs with top-quality Vehicle Hoods parts, including 2 OEM and aftermarket selections for your 2006 model.
StrongArm – Trunk Lift Support: 11.5" Ext Length, 3.63" Travel, 152 Lbs of Force, 1 Pk (Part No.E6404)
from
$18.29
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
StrongArm – Hood Lift Support: 28.81" Ext Length, 11.5" Travel, 56 Lbs of Force, 1 Pk (Part No.B6307)
from
$46.99
Opening your vehicle’s rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:
See More
Product Features:
- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
In-Demand Bodies and Fender Parts for 2006 Cadillac CTSs
Select from 19 premium Bodies and Fender Parts parts for your 2006 Cadillac CTS, with prices ranging from $0.79 to $87.99.
Dorman – GM Blind Rivet Retainer – Diameter 3/16 In. (Part No.963-205D)
from
$4.99
Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.
Product Features:
See More
Product Features:
- Available in blind, push-in and screw-in styles
- Constructed of high-quality materials for long-lasting durability
- Also suitable for a broad variety of industrial and commercial uses
- Packaged in a variety of piece counts for use with both small and large projects
Dorman – Panel Trim Retainer – Interior (Part No.45490)
from
$1.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for Length-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Splash Shield Retainer (Part No.700-079CD)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for Length-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – GM Bumper Retainer (Part No.961-070D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Windshield Garnish Clip – Exterior (Part No.963-211)
from
$5.29
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for Length-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Dorman – Molding Retainer (Part No.963-200D)
from
$3.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
GM Genuine Parts – 2-Way Male Black Multi-Purpose Pigtail (Part No.PT786)
from
$40.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
KAI – Fender Liner (Part No.GM1249230)
from
$31.99
New Standard Replacement Passenger Side Fender Liner, Extension Bumper Fascia
Product Features:
See More
Product Features:
- Extension Bumper Fascia, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
ACDelco – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT276)
from
$49.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
GM Genuine Parts – Multi-Purpose Pigtail (Part No.PT2038)
from
$87.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
KAI – Fender Liner (Part No.GM1249159)
from
$18.99
New Standard Replacement Passenger Side Fender Liner, Rear Section
Product Features:
See More
Product Features:
- Rear Section, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
KAI – Fender Liner (Part No.GM1248159)
from
$18.99
New Standard Replacement Driver Side Fender Liner, Rear Section
Product Features:
See More
Product Features:
- Rear Section, Made Of Plastic
- Meets All Federal Motor Safety Standards
- No Drilling Needed For Installation
- No Modifications Needed For Installation
- Direct Fit Replacement For Your Vehicle
- Same Form Fit And Function As OE
- Check Out The Large Selection Of Parts Available For Your Vehicle
Dorman – Push-Pull Rivet-Rocker Panel – 9 mm Hole, 22 mm Stem, 15 mm Head (Part No.963-093D)
from
$4.99
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Moulding Retainer-Interior-GM (Part No.963-200)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Needa Parts – Panel Trim Retainer – Interior – GM/Chrysler (Part No.45478)
from
$2.79
Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.
Product Features:
See More
Product Features:
- Needa Parts offers a complete assortment for all popular makes and models
- Vehicle make specific fastener kits are available
- All fasteners meet or exceed OEM standards
Dorman – Rivet-Push In-Hole Diameter .250 In. (sold by each) (Part No.700-579)
from
$1.59
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Blind Rivet Retainer-GM-Diameter 3/16 In. (sold by each) (Part No.700-038)
from
$1.29
Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.
Product Features:
See More
Product Features:
- Available in blind, push-in and screw-in styles
- Constructed of high-quality materials for long-lasting durability
- Also suitable for a broad variety of industrial and commercial uses
- Packaged in a variety of piece counts for use with both small and large projects
Dorman – Front Fender Retainer – Honda (sold by each) (Part No.700-626)
from
$1.29
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for Length-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Dorman – Push-Type Retainer – Chevrolet (sold by each) (Part No.700-061)
from
$0.79
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring Length service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for Length-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Most Sold 2006 Cadillac CTS Vehicle Windows
Explore our best-selling Cadillac parts for the 2006 CTS among 7 OEM and aftermarket options starting from $60.99.
Dorman – Window Regulator: Power, 1 Pack (Part No.740-062)
from
$79.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Dorman – Window Regulator: Power, 1 Pack (Part No.740-065)
from
$60.99
This replacement window regulator is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Reliable design – engineered in the USA and backed by long history of automotive aftermarket experience
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-065)
from
$147.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
- Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
Dorman – Window Regulator & Motor Assembly: Power, 1 Pack (Part No.741-064)
from
$147.99
This replacement power window motor and regulator assembly is precision-engineered and extensively tested to match the exact fit, function and performance of the stock window regulator on specific vehicle years, makes and models.
Product Features:
See More
Product Features:
- Trustworthy replacement – engineered and tested to match the fit, function and performance of the original window regulator on specified vehicles
- Quality assured – extensively tested by cycling thousands of times in an actual vehicle door to ensure a long, trouble-free service life
- Easy installation – reverse-engineered to match the original equipment shape and dimensions to provide a direct, seamless fit
- Reliable design – engineered in North America and backed by long history of automotive aftermarket experience
AISIN – Power Window Regulator Assembly without Motor (Part No.RPGM-090)
from
$114.99
AISIN Window Regulator Assemblies and Motors are mechanical and electrical components that work together to raise and lower the power windows in a vehicle. The window regulator assembly is the mechanical component that consists of gears, tracks and other parts that move the window up and down. The electric motor is the component that provides the power to move the window. Together, they form the power window system that allows the driver and passengers to easily raise and lower the windows with the push of a button.
Product Features:
See More
Product Features:
- 100% new with many improvements from factory design.
- Designed and manufactured to meet OE standards.
- Strict quality control to ensure perfect fit.
AISIN – WIN REG W/O MOTOR (Part No.RPGM-091)
from
$95.99
Product Features:
See More
- Designed and Manufactured to Meet OE Standards
- Strict Quality Control to Ensure Perfect Fit
- Re-Engineered Processes to Improve OE Designs
- Simulated Environmental Testing Conditions Ensures Fit, Form, and Function
AISIN – WIN REG W/O MOTOR (Part No.RPGM-092)
from
$70.99
WIN REG W/O MOTOR
Top-Rated Body Parts Brands For Your 2006 Cadillac CTS
Shop for the best-rated brands offering Body Parts and other products for your 2006 Cadillac CTSs. Below you’ll find some of our best rated Body Parts from StrongArm and Dorman, and more. Body Parts from these brands that fit a 2006 CTS start at just $4.99 and are rated as high as 4.5 stars. OEM and aftermarket Body Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular StrongArm 2006 Cadillac CTS Body Parts
When it comes to maintaining or upgrading your 2006 Cadillac CTS, using quality Body Parts is essential to ensure durability and a perfect fit. StrongArm ticks all of those boxes. We offer a wide selection of StrongArm Body Parts, specifically designed for the 2006 Cadillac CTS. With over 2 StrongArm brand Body Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.29, with an average price of just $32.64. Plus, with over 12 customer reviews and an average rating of 4.5 stars, you can trust that our StrongArm Body Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$18.29
(9)
Trunk Lift Support: 11.5" Ext Length, 3.63" Travel, 152 Lbs of Force, 1 Pk
“Easy order and pickup from store”
from
$46.99
(3)
Hood Lift Support: 28.81" Ext Length, 11.5" Travel, 56 Lbs of Force, 1 Pk
“The part was an exact fit … very easy installation … that’s why I get my parts from Advance”
Popular Dorman 2006 Cadillac CTS Body Parts
Dorman auto parts is one of the highest quality Body Part brands in the market. Any 2006 Cadillac CTS owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2006 CTS, Advance Auto Parts carries a full inventory of 2 Dorman Body Parts. Plus you will be keeping your Cadillac in peak condition while saving money because prices on these Dorman Body Parts range from $4.99 to $41.99, plus, with more than 3 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Body Parts below will deliver on both quality and value.
from
$4.99
(2)
GM Blind Rivet Retainer – Diameter 3/16 In.
“Wow so the Traverse middle row roof window… The bracket that locks the cover broke.. After many failed starts I went to Advanced on Miller Rd columb”
FAQs for 2006 Cadillac CTS Body Parts
Which Body Parts are best-sellers for 2006 Cadillac CTSs?
Out of 51 Body Parts that fit 2006 Cadillac CTSs, the following parts are the top sellers:
- Splash Shield Retainer (11826830) – $4.99
- GM Bumper Retainer (11910693) – $4.99
- Panel Trim Retainer – Interior (5029937) – $1.79
What’s the price range for 2006 Cadillac CTS Body Parts?
Body Part prices for the 2006 Cadillac CTS start at $0.79 and go up to $259.99 for the most premium parts.
What’s the average price of a Body Part for a 2006 Cadillac CTS?
The average price for Body Parts for the 2006 Cadillac CTS is $56.70. Keep in mind the variety of part types within our Body Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Body Parts for other Cadillac CTS model years?
What are the cheapest Body Parts for my 2006 Cadillac CTS?
The cheapest 2006 Cadillac CTS Body Parts we carry in stock are:
- Push-Type Retainer – Chevrolet (sold by each) (11224051) – $0.79
- Splash Shield Clip – Honda (sold by each) (10904461) – $1.29
- Blind Rivet Retainer-GM-Diameter 3/16 In. (sold by each) (11224079) – $1.29
- Front Fender Retainer – Honda (sold by each) (11224096) – $1.29
- Rivet-Push In-Hole Diameter .250 In. (sold by each) (22142348) – $1.59
What are the top-rated Body Parts that fit the 2006 Cadillac CTS?
Out of 47 reviews by customers, our 2006 Cadillac CTS Body Parts have an average customer rating of . These are some of the highest-rated Body Part types for the 2006 Cadillac CTS and their top-rated products:
- Vehicle Hoods
- Trunk Lift Support: 11.5" Ext Length, 3.63" Travel, 152 Lbs of Force, 1 Pk (20940096) – $18.29
- Hood Lift Support: 28.81" Ext Length, 11.5" Travel, 56 Lbs of Force, 1 Pk (20940205) – $46.99
What types of Body Parts do you sell for my 2006 Cadillac CTS?
As of 3/1/26, these are some of the most in-demand types of Body Parts for a 2006 Cadillac CTS:
Can I get help with 2006 Cadillac CTS Body Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Cadillac Body Parts and more.
What is your return policy for Cadillac CTS Body Parts?
Advance Auto Parts keeps returns simple. For new Cadillac CTS Body Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
