2006 Buick Rendezvous Suspension Parts

Essential 2006 Buick Rendezvous Suspension Parts

MOOG – Coil Spring Set (Part No.81039)

Coil Spring Set

from

$107.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

ACDelco – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT146)

2-Way Female Black Multi-Purpose Pigtail

from

$26.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:
  • Protective outer coverings help provide long-lasting durability
  • Color-coded wires allow for easy installation
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA826)

Max-Air Air Shock Absorber

from

$234.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Rare Parts – Spring Insulator (Part No.RP53173)

Spring Insulator

from

$22.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

KYB – Bellows Bump Stop Kit (Part No.L3037242547KYB)

Bellows Bump Stop Kit

from

$24.76
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.

Product Features:
  • Made from premium quality cellular polyurethane
  • The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
  • KYB Bump Stop Kits suit a variety of vehicle applications
  • KYB Bump Stop Kits perfectly compliment KYB Struts
See More

Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172113)

Complete Strut Assembly: Includes Strut, Coil Spring, and Mount

from

$244.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
See More

Dorman – Suspension Knuckle Bushing (Part No.905-505)

Suspension Knuckle Bushing

from

$64.99
This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Monroe – Strut-Mate Strut Boot Kit (Part No.63622)

Strut-Mate Strut Boot Kit

from

$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:
  • REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
  • PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
  • KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
  • ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
  • PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
  • EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
  • BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK29)

Monroe Shock Absorber Air Hose Kit

from

$33.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Rare Parts – Control Arm Bushing (Part No.RP19388)

Control Arm Bushing

from

$29.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Suncore – Shock Absorber (Part No.12S251600)

Shock Absorber

from

$21.99
Shock Absorber

Dorman – Suspension Lateral Arm (Part No.528-235)

Suspension Lateral Arm

from

$60.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart

from

$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

KYB – STRUT MOUNTING KIT (Part No.L3033407140KYB)

STRUT MOUNTING KIT

from

$55.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Dorman – Suspension Control Arm (Part No.521-011)

Suspension Control Arm

from

$281.99
This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Strut Mount (Part No.K6521)

Strut Mount

from

$116.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Engineered to meet or exceed OE requirements
  • Superior rubber to steel bonding for durability
  • High polish chrome steel bearing races
  • Replacement helps restore vehicle handling
  • Includes new spring seat insulator and installation hardware to eliminate noise issues
  • Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
See More

Suncore – Complete Strut Assem (Part No.55S11320)

Complete Strut Assem

from

$119.99
Complete Strut Assem

Monroe – OESpectrum Strut (Part No.72113)

OESpectrum Strut

from

$112.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Suncore – Shock Kit (Part No.2-12S251600-001)

Shock Kit

from

$39.99
Shock Kit

Dorman – Suspension Control Arm (Part No.520-197)

Suspension Control Arm

from

$125.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

Dorman – Suspension Control Arm (Part No.520-198)

Suspension Control Arm

from

$116.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:
  • Direct replacement – fits and performs like the original equipment on specific vehicles
  • Reliable fit – precision-engineered to match the design and dimensions of original components
  • Durable construction – manufactured to strict standards using sturdy, safe materials
  • Rigorously tested – thorough quality control measures ensure longevity
See More

MOOG – Coil Spring Set (Part No.81040)

Coil Spring Set

from

$159.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Rare Parts – Spring Seat (Part No.RP53176)

Spring Seat

from

$73.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces road noise
  • Reduces vibration
  • UV resistant
See More

MOOG – Suspension Coil Spring Seat (Part No.K80923)

Suspension Coil Spring Seat

from

$13.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Protects spring and spring seat from damage
  • Replacement helps to reduce noise
  • Includes insulator and bearing
See More

Rare Parts – Coil Spring Seat (Part No.RP46360)

Coil Spring Seat

from

$27.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle handling
  • Reduces road noise
  • Reduces vibration
  • UV resistant
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)

A/C Compressor Relay Connector

from

$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

2006 Buick Rendezvous Suspension Parts

You count on your 2006 Buick Rendezvous to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 51 Suspension Parts ranging in price from $6.29 to $281.99, you’re sure to find everything you need for your 2006 Buick Rendezvous.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 12 different brands like Valvoline, Monroe, and Moog. 2006 Buick Rendezvous Suspension Parts start as low as $6.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 504 extensive product reviews on 2006 Buick Rendezvous Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut-Mate Strut Boot Kit with 4.6 stars and Suspension Knuckle Bushing with 4.0 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2006 Buick Rendezvous below to get started!

Top-Rated Suspension Parts Brands For Your 2006 Buick Rendezvous

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2006 Buick Rendezvous running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.

Popular Driveworks Suspension Parts

You’ll find popular Driveworks brand products across Control Arms. All are waiting to get your 2006 Buick Rendezvous back on the road. Some of the top-rated Driveworks products in these categories are:
CONTROL ARM BUSHING
from $14.49
(1)
CONTROL ARM BUSHING
Lower Control Arm Bushings

FAQs for 2006 Buick Rendezvous Suspension Parts

What are the most purchased Suspension Parts for the 2006 Buick Rendezvous?

Out of 51 Suspension Parts for the 2006 Buick Rendezvous, the most popular in our inventory are:
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from $14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Control Arm Bushing
from $31.99
(22)
Control Arm Bushing
Lower Control Arm Bushings
Strut Bellows
from $16.99
(11)
Strut Bellows
Shock Boots, Levelers, and Accessories

What are the top-rated 2006 Buick Rendezvous Suspension Parts?

Top-rated Suspension Parts for your 2006 Buick Rendezvous based on customer reviews/ratings are:
Strut-Mate Strut Boot Kit
from $27.99
(5)
Strut-Mate Strut Boot Kit
“A Little different than the OEM part but worked just fine. American Made always a PLUS.”
Suspension Knuckle Bushing
from $64.99
(5)
Suspension Knuckle Bushing
“when installing make sure area is clean and have a flat driver to fit over included installer”
Coil Spring Set
from $107.99
(4)
Coil Spring Set
“Just perfect size great quality”