2006 Audi A3 Quattro Suspension Parts

Below you will find various in-demand Audi Suspension Parts, components and accessories for your 2006 A3 Quattro. Advance Auto Parts has popular A3 Quattro parts like Control Arms, Trailing Arms, Air Suspension and Kits and more. You’ll also find aftermarket and OEM Suspension Parts for other A3 Quattro model years including 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2022, 2023 and more. Select a category of 2006 Audi A3 Quattro Suspension Parts below and start saving instantly.

Popular 2006 Audi A3 Quattro Suspension Parts Categories

Suspension Self-Leveling Unit Fluids

Suspension Strut and Coil Spring Assemblies

Rear Shock and Struts

Front Shock and Struts

Active Suspension Relays

Front and Rear Shock or Strut Kits

Control Arm Support Brackets

Suspension Air Compressor Relays

Suspension Complete Bushing Kits

Lower Control Arm Bushings

Trailing Arm Bushings

Suspension Strut Mount Kits

Coil Spring Seats

Strut Bumpers

Stability Control Steering Angle Sensors

Shock Absorber Nuts

Essential Suspension Parts for 2006 Audi A3 Quattros

from

$214.99

Quick Strut Kit

from

$12.36

The ISG Shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration. The shock absorber mounting (suspension strut support bearing) is the upper attachment/pivotal point between the shock absorber and chassis. It supports the vehicle weight, enables a steering of the spring strut and prevents the penetration of vibrations and noises into the chassis.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$141.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$58.25

The Febi Control Arm Mounting Bracket is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

All components are perfectly matched.
OE-Equivalent and Direct fit for easy Installation.
Maximum safety and driving comfort.
Manufactured using high quality OE materials.

from

$488.99

By matching key bushing, alignment and geometry products into one solution, Whiteline Essential Kits provide bang for your buck handling upgrades that simply Activate More Grip. Essentials include the famous front anti lift/ caster kit, steering precision rack and control arm bushings that deliver go kart like steering and next level grip to your vehicle.

Product Features:

Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$10.29

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$31.49

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$34.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

from

$85.99

Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$157.69

Steering Angle Sensor

from

$51.99

Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.

Product Features:

Direct replacement – this suspension trailing arm fits and functions like the original equipment part.
Quality construction – manufactured from same materials as original equipment for safety and reliability.
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$109.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Precise tolerances
Corrosion resistant

from

$12.49

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

from

$9.99

This relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$46.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to the rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Manufactured to strict engineering standards/specifications in materials and tolerances.
High corrosion resistance.
Matches original equipment design specifications

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$66.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$23.87

The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$71.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$3971.66

The BILSTEIN PSS10 suspension systems offer the ultimate adjustable sports suspension. 10 settings for parallel damping adjustment / Option of making settings while kit is installed – simply turn the adjustment wheel on the shock absorber The manually adjustable damping monotube gas shock absorbers feature a 10 stage precise compression and rebound settings, from comfort to competition. The Bilstein B16 PSS9/10 kit is a race inspired system, providing the ultimate in high performance tuning. The manually adjustable monotube gas shock absorbers feature 9 or 10-stage precise compressing and rebound settings, from comfort to competition. The threaded body allows accurate adjustability of the front and rear progressive springs to achieve the vehicle ride height (30mm to 50mm), center of gravity and level of performance handling desired. Bilstein’s patented Triple-C-Technology coating ensures long-lasting resistance to corrosion. Threaded Body Adjustable Range: – The Bilstein PSS adjustable ride height threaded bodies allows the fine tuning of the vehicle to fit the individual drivers demands and enables the adjustment of the height of the vehicle after they are installed.

Product Features:

Individual settings ranging from maximum Comfort to aggressive Sport can be selected by the twist of a dial
Threaded body adjustable range of 20mm at both axles.
Lowering of approx. 30-50mm at front and rear.
Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions.
Spring plates and lock nuts made from a special aluminum alloy.
Surface coating using Triple-C-Technology for long-lasting corrosion resistance.
Round threads for easy adjustment.
Quality sport springs made from highly durable material.
Gas pressure technology.
Ensures a high level of traction and more precise handling
A must-have for powerful sport suspensions
Large effective surface on the working piston creates increased damping power and better handling
Improved dissipation of thermal energy outwards enables a consistently high level of absorber performance

from

$12.40

Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style struts
Are built with design and quality that matches or exceeds OE quality

from

$172.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$15.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$41.99

Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline’s advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.

Product Features:

Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$50.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Control Arm Bushing Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to AUDI 06-13; VW 05-19;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2005-2019
Weight approx: 2 Lbs
CONTROL ARM BUSHING
PART GROUP: 9257, 9259

from

$121.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Upgrade your 2006 Audi A3 Quattro with Top-Quality Suspension Parts

When it comes to maintaining or upgrading your 2006 Audi A3 Quattro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Suspension Parts are key to keeping your A3 Quattro functioning at its best. At Advance Auto Parts, we offer a wide selection of 87 Suspension Parts for the 2006 Audi A3 Quattro, designed to meet your needs without breaking the bank. From Control Arm replacements to Trailing Arms upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Suspension Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Suspension Parts for your 2006 Audi A3 Quattro at great prices. Our Suspension Parts inventory for this model ranges from just $1.23 to $3,971.66, with an average price of $130.01. Our 87 Suspension Parts in stock come from 25 trusted brands, so you’re sure to find the right part for your 2006 Audi A3 Quattro without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2006 Audi A3 Quattro, we stock popular OEM and aftermarket Suspension Parts from top names like Valvoline, Dorman, Monroe, and more. Valvoline Suspension Parts start at just $36.49 and boast an impressive 5 stars average rating from customers. Dorman and Monroe also bring quality to the table, with Suspension Parts available starting at $9.99, and at an average 4 stars rating. With 548 customer reviews and counting, our 2006 Audi A3 Quattro Suspension Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Suspension Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Audi A3 Quattro is always ready to roll. We’re committed to providing you with everything you need to keep your A3 Quattro in top shape, all in one place. Start shopping confidently below for your 2006 Audi A3 Quattro!

Best-Selling Control Arms for 2006 Audi A3 Quattros

Enhance the driving experience in your Audi with 48 quality Control Arm components, starting at $12.94.

show more show less

from

$82.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$12.94

The Febi Trailing Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

from

$146.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$20.29

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Bushings manufactured from high quality elastomer compounds for durability and ride performance
Assembled with proper precompression for ultimate in performance and feel

from

$18.49

HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
OE-STYLE DESIGN — Engineered to match or exceed OE requirements
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$99.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$139.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$139.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$99.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$75.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$50.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2005-2019
Weight approx: 2 Lbs
CONTROL ARM BUSHING
PART GROUP: 9257, 9259

from

$176.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$71.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$50.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
For Years: 2005-2019
Weight approx: 2 Lbs
CONTROL ARM BUSHING
PART GROUP: 9257, 9259

from

$49.99

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

from

$172.99

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$775.99

These Whiteline front lower control arms feature high-quality alloy, which offers considerable weight saving over original equipment quality arms. The reduction in weight of the arm, which is partly unsprung weight, brings the similar benefits to a light alloy wheel. In addition Whiteline has engineered significant geometry gains with +0.5deg caster and anti-lift improvements into these arms to optimise wheel alignments settings for street and track performance. Caster increases dynamic negative camber on the outside wheel whilst turning, offering more grip without introducing the tyre wear associated with static negative camber. Furthermore the increase in caster improves traction and increases the self-centring effect of the steering. Throw this altogether and the small change in additional caster improves the front-end grip and handling considerably. The change in lift and dive geometry enables the suspension to work more freely. Whiteline’s rear mounted bushing combines the superior mechanical properties of synthetic elastomer formulation with high light alloy housing boasting anti geometry characteristics permitting smooth movement of the arm as the wheel moves up and down. Complemented by a front bushing utilizing an oversized heavy duty crush tube, resulting in dramatic im(more…)

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$320.99

Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.

Product Features:

Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$254.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$163.30

Our OE safety technology is fitted to millions of vehicles worldwide and we apply our OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi’s extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.

Product Features:

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to Micron tolerances to guarantee durability and smooth Joint operation
Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

from

$159.79

Delphi control arms undergo 100% crack detection and ultrasonic flaw detection to ensure materials match OE specifications
Control arms utilize robot welding for consistent performance and quality
Delphi machines the ball studs to Micron tolerances to guarantee durability and smooth Joint operation
Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics

from

$138.97

CONTROL ARM MNTG BRA

from

$138.97

CONTROL ARM MNTG BRA

from

$135.99

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$109.99

Precise tolerances
Corrosion resistant

from

$104.99

Worn suspension can cause loose steering, increased wear on tires, excess noise and lead to misalignments. Rein Automotive OE quality suspension parts are direct replacements for OE suspension parts and will reduce the wear on tires and reduce noise as well as tighten steering. Rein Automotive suspension parts come with the mounting hardware if required.

from

$103.57

The Febi control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$92.99

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Internal grease reservoirs provide continual self lubrication for optimum friction management.
Install guide included providing detailed instructions on how to install your new Whiteline purchase.

from

$85.99

Rigorously tested for sustained, secure performance by a team of product and quality engineers, our Lateral Arm is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Direct replacement for a trouble-free installation
Bushings included for a complete installation, saving time and labor (where applicable)
Corrosion-resistant for long-lasting performance
A rigorous quality inspection has been undertaken to ensure that this part conforms to standards

from

$82.73

Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm & Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.

Product Features:

Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

from

$75.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Construction and design validated by MOOG engineers
Broad coverage for foreign and domestic applications

from

$74.99

Over compliant front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Whiteline’s kit is specially designed to improve deflection rates for improved response and chassis control.

Product Features:

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$71.75

Tie rods from Lemfoerder with high grade synthetic socket materials provide not only greater resistance but also outstanding slide properties and excellent damping. Highly demanding requirements are put forward for the design/engineering, production, and assembly of Lemfoerder tie rods.

Product Features:

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties

from

$69.63

The Febi control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$60.13

The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$58.25

The Febi Control Arm Mounting Bracket is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

All components are perfectly matched.
OE-Equivalent and Direct fit for easy Installation.
Maximum safety and driving comfort.
Manufactured using high quality OE materials.

from

$49.99

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

from

$46.41

The Lemfoerder control arm is manufactured to exact OEM specifications providing original equipment quality, durability and performance.

Product Features:

OE-Equivalent and Direct fit for easy Installation.
Manufactured using high quality OE materials.
Includes factory specified hardware.

from

$42.32

Control Arm

from

$39.99

CONTROL ARM BUSHING

from

$39.99

CONTROL ARM BUSHING

from

$31.99

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$31.99

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$28.99

Internal grease reservoirs provide continual self lubrication for optimum friction management.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$21.59

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Bushing is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features
Dynamic testing of complete units to ensure leak free performance
Extensive on-road testing at TRW tracks around the world

from

$19.49

Reduces vibration
Torsional rubber bushings
UV resistant
No Squeak

from

$15.99

This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment bushing on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$14.32

The Lemfoerder Control Arm Bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce vibration and absorb noise.

Most Popular 2006 Audi A3 Quattro Trailing Arms

Customize your Audi with 5 Trailing Arms products like Trailing Arms and Trailing Arm Bushings, all priced under $80.99.

show more show less

from

$51.99

Direct replacement – this suspension trailing arm fits and functions like the original equipment part.
Quality construction – manufactured from same materials as original equipment for safety and reliability.
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$51.99

Direct replacement – this suspension trailing arm fits and functions like the original equipment part.
Quality construction – manufactured from same materials as original equipment for safety and reliability.
Durable – protective finish for long-lasting corrosion resistance
Quality tested – has undergone testing to ensure proper fit and performance

from

$80.99

Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm bushings have failed. Replace these worn parts with Whiteline bushings with core characteristics ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.

Product Features:

Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

from

$65.81

Original Equipment Manufacturer
High grade synthetic socket materials
Outstanding slide properties

from

$12.49

All Rein Automotive control arm bushings are hydraulic or rubber-to-metal based on the original equipment mount, ensuring the parts performs like original.
Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Recommend to replace bushings in pairs to ensure best performance. Note: Control Arm Bushing Kits contain the needed pair.

Top Picks for 2006 Audi A3 Quattro Air Suspension and Kits

Upgrade Audi A3 Quattros with top-quality Air Suspension and Kits parts, including 9 OEM and aftermarket selections for your 2006 model.

show more show less

from

$36.49

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$9.99

Direct replacement – this relay connector matches the appearance and function of the factory hardware on specified applications.
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$214.99

Quick Strut Kit

from

$10.29

from

$66.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$3971.66

Individual settings ranging from maximum Comfort to aggressive Sport can be selected by the twist of a dial
Threaded body adjustable range of 20mm at both axles.
Lowering of approx. 30-50mm at front and rear.
Road-tested and fine-tuned by BILSTEIN ride engineers, under extreme motorsports conditions.
Spring plates and lock nuts made from a special aluminum alloy.
Surface coating using Triple-C-Technology for long-lasting corrosion resistance.
Round threads for easy adjustment.
Quality sport springs made from highly durable material.
Gas pressure technology.
Ensures a high level of traction and more precise handling
A must-have for powerful sport suspensions
Large effective surface on the working piston creates increased damping power and better handling
Improved dissipation of thermal energy outwards enables a consistently high level of absorber performance

from

$488.99

Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$46.99

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity.
Manufactured to strict engineering standards/specifications in materials and tolerances.
High corrosion resistance.
Matches original equipment design specifications

from

$1.84

Expansion Tank Clamp

In-Demand Coil and Leaf Springs for 2006 Audi A3 Quattros

Select from 3 premium Coil and Leaf Springs parts for your 2006 Audi A3 Quattro, with prices ranging from $23.87 to $121.99.

show more show less

from

$24.93

The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$23.87

The APA/URO Spring Seat is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$121.99

Most Sold 2006 Audi A3 Quattro Shocks and Struts

Explore our best-selling Audi parts for the 2006 A3 Quattro among 21 OEM and aftermarket options starting from $1.23.

show more show less

from

$13.99

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$13.29

Protects the shock’s piston rod from damage
Universal design for easy installation
Tie-strap included for a secure fit
Constructed from high quality urethane for maximum durability
Multiple color choices available

from

$85.99

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$11.99

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

Designed to meet or exceeds OE performance specifications
Durable neoprene rubber

from

$35.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Restores like-new steering and handling
Construction and design validated by MOOG engineers
Engineered to meet or exceed OE requirements
Incorporates proven design and engineering features

from

$18.99

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$109.99

Complete Strut Assem

from

$72.99

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$141.99

REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.

from

$31.49

Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
Poly Foam Bumper Prevents The Strut From Bottoming Out
Built With Design And Quality That Matches Or Exceeds One
Protects The Upper Seal And Bushing

from

$46.45

The Lemfoerder strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Pivot for the steering mechanism, providing a smooth steering response
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$34.99

Manufactured to strict engineering standards/specifications in materials and tolerances
Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
High corrosion resistance

from

$117.99

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$59.50

SHOCK MOUNT

from

$54.80

The highest quality replacement strut mount available
Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
Superior rubber reduces noise, vibration and harshness
Mount bearings provide smoother steering and help retain front end alignment
Matched grade studs and nuts

from

$43.65

Shock Mount

from

$42.02

Strut Mount

from

$35.68

The Corteco Shock mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$12.36

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$10.66

Febi’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:

Made from premium quality cellular polyurethane
Perfectly compliment OE style struts
Are built with design and quality that matches or exceeds OE quality

from

$1.23

Exhaust Flange Nut

Top-Rated Suspension Parts Brands For Your 2006 Audi A3 Quattro

Shop for the best-rated brands offering Suspension Parts and other products for your 2006 Audi A3 Quattros. Below you’ll find some of our best rated Suspension Parts from Valvoline, Dorman, and Monroe, and more. Suspension Parts from these brands that fit a 2006 A3 Quattro start at just $9.99 and are rated as high as 5 stars. OEM and aftermarket Suspension Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Valvoline 2006 Audi A3 Quattro Suspension Parts

When it comes to maintaining or upgrading your 2006 Audi A3 Quattro, using quality Suspension Parts is essential to ensure durability and a perfect fit. Valvoline ticks all of those boxes. We offer a wide selection of Valvoline Suspension Parts, specifically designed for the 2006 Audi A3 Quattro. With over 1 Valvoline brand Suspension Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $36.49. Plus, with over 446 customer reviews and an average rating of 5 stars, you can trust that our Valvoline Suspension Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$36.49

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon

“Good product”

Popular Dorman 2006 Audi A3 Quattro Suspension Parts

Dorman auto parts is one of the highest quality Suspension Part brands in the market. Any 2006 Audi A3 Quattro owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2006 A3 Quattro, Advance Auto Parts carries a full inventory of 14 Dorman Suspension Parts. Plus you will be keeping your Audi in peak condition while saving money because prices on these Dorman Suspension Parts range from $9.99 to $176.99, plus, with more than 8 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Suspension Parts below will deliver on both quality and value.

from
$99.99

This product is not rated

Suspension Control Arm

“”

from
$139.99

This product is not rated

Suspension Control Arm

“”

from
$146.99

This product is not rated

Suspension Control Arm

“”

FAQs for 2006 Audi A3 Quattro Suspension Parts

Which Suspension Parts are best-sellers for 2006 Audi A3 Quattros?

Out of 87 Suspension Parts that fit 2006 Audi A3 Quattros, the following parts are the top sellers:

OESpectrum Passenger Car Shock Absorber (15740342) – $85.99
Strut Bellow (11049894) – $11.99
Strut Bellows (20518180) – $35.99

What’s the price range for 2006 Audi A3 Quattro Suspension Parts?

Suspension Part prices for the 2006 Audi A3 Quattro start at $1.23 and go up to $3,971.66 for the most premium parts.

What’s the average price of a Suspension Part for a 2006 Audi A3 Quattro?

The average price for Suspension Parts for the 2006 Audi A3 Quattro is $130.01. Keep in mind the variety of part types within our Suspension Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Suspension Parts for other Audi A3 Quattro model years?

Yes, we currently carry Suspension Parts for 16 model years of Audi A3 Quattros between 2007 and 2024. Suspension Parts are bought most frequently for the following model years: 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015, and 2013.

What are the cheapest Suspension Parts for my 2006 Audi A3 Quattro?

The cheapest 2006 Audi A3 Quattro Suspension Parts we carry in stock are:

Exhaust Flange Nut (12504014) – $1.23
Expansion Tank Clamp (12488344) – $1.84
30 AMP 12 Volt 4 Pin Universal Relay (5760055) – $9.99
Multi Purpose Relay (12459837) – $10.29
Strut Bump Stop (10756295) – $10.66

What are the top-rated Suspension Parts that fit the 2006 Audi A3 Quattro?

Out of 548 reviews by customers, our 2006 Audi A3 Quattro Suspension Parts have an average customer rating of . These are some of the highest-rated Suspension Part types for the 2006 Audi A3 Quattro and their top-rated products:

Shocks and Struts
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
- Strut Bellow (11049894) – $11.99
Control Arms
- Shock-Mate Shock Absorber Boot Kit (5100009) – $13.29
- Shock-Mate Shock Absorber Boot Kit (15740047) – $13.99
- Strut Bellow (11049894) – $11.99

What types of Suspension Parts do you sell for my 2006 Audi A3 Quattro?

As of 2/5/25, these are some of the most in-demand types of Suspension Parts for a 2006 Audi A3 Quattro:

Can I get help with 2006 Audi A3 Quattro Suspension Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Suspension Parts and more.

What is your return policy for Audi A3 Quattro Suspension Parts?

Advance Auto Parts keeps returns simple. For new Audi A3 Quattro Suspension Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Audi A3 Quattro Suspension Parts

Suncore – Quick Strut Kit (Part No.2-55S11060-001)

International Suspension Group – Shock Mount (Part No.L4010180306ISG)

Monroe – OESpectrum Strut (Part No.72312)

Febi – Control Arm Mounting Bracket (Part No.L2059386231FEB)

Whiteline – Essential Vehicle Kit (Part No.WEK004)

Carquest Premium – Multi Purpose Relay (Part No.RAA1245)

KYB – Jounce Bumper and Bellows (Part No.SB114)

Rein – Strut Mount (Part No.AVQ0366R)

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5611)

Original Equipment – Steering Angle Sensor (Part No.P3520383627OEA)

Dorman – Suspension Trailing Arm (Part No.522-781)

Rare Parts – Lateral Link (Part No.RP12169)

Rein – Bushing (Part No.AVB0358R)

Dorman – 30 AMP 12 Volt 4 Pin Universal Relay (Part No.84601)

Rein – Strut Mount Kit (Part No.AVQ0262R)

Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Gallon (Part No.773775)

Monroe – Strut-Mate Shock Mounting Kit (Part No.907947)

APA/URO Parts – Spring Seat (Part No.L5005946811APA)

MOOG – Control Arm (Part No.RK640386)

Bilstein – B16 – PSS-10 Suspension Kit (Part No.L6000396920BIL)

Febi – Strut Bump Stop (Part No.L3036233122FEB)

Dorman – Suspension Control Arm (Part No.520-580)

Dorman – Suspension Control Arm Bushing (Part No.533-691)

Whiteline – Control Arm Upper Inner Rear Bushing (Part No.W53660)

Anchor – Control Arm Bushing Motor Mount: Right, 1 Piece (Part No.9257)

Carquest Premium – Complete Strut Assembly 18-920134 : Includes Strut, Coil Spring and Mount (Part No.18-920134)

MOOG – Control Arm (Part No.RK640613)

Febi – Trailing Arm Bushing (Part No.L2006230113FEB)

Dorman – Suspension Control Arm (Part No.522-731)

MOOG – Control Arm Bushing (Part No.K200094)

MOOG – Control Arm Bushing (Part No.K201860)

Dorman – Suspension Control Arm (Part No.521-548)

Dorman – Suspension Control Arm (Part No.520-991)

Dorman – Suspension Control Arm (Part No.520-992)

Dorman – Suspension Control Arm (Part No.521-547)

Dorman – Suspension Control Arm (Part No.521-546)

Anchor – Control Arm Bushing Motor Mount: Right, 1 Piece (Part No.9257)

Dorman – Suspension Control Arm (Part No.520-579)

MOOG – Control Arm (Part No.RK640386)

Anchor – Control Arm Bushing Motor Mount: Left, 1 Piece (Part No.9259)

Rein – Control Arm Bushing (Part No.AVB0454)

Dorman – Suspension Control Arm (Part No.520-580)

Whiteline – Control Arm Lower Arm (Part No.KTA253)

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.KCA316)

MOOG – Control Arm (Part No.RK642309)

Delphi – Suspension Control Arm, 1 Pack (Part No.L2000384909DEL)

Delphi – Suspension Control Arm, 1 Pack (Part No.L2000384908DEL)

Worldpac – CONTROL ARM MNTG BRA (Part No.L2059386231MEY)

Worldpac – CONTROL ARM MNTG BRA (Part No.L2059386233MEY)

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.W53514)

Rare Parts – Lateral Link (Part No.RP12169)

Rein – Control Arm (Part No.SCA0148P)

Febi – Control Arm (Part No.L2000383591FEB)

Whiteline – Control Arm Lower Inner Rear Bushing (Part No.W53196)

Dorman – Lateral Control Arm (Part No.L2002720689DOR)

Dorman – Control Arm (Part No.L2000720690DOR)

MOOG – Control Arm (Part No.RK642013)

Whiteline – Control Arm Lower Inner Front Bushing (Part No.W0503)

Lemfoerder – Tie Rod (Part No.L2000384942LEM)

Febi – Control Arm (Part No.L2000434432FEB)

Lemfoerder – OE Replacement Control Arm (Part No.L2000664537LEM)

Febi – Control Arm Mounting Bracket (Part No.L2059386231FEB)

Rein – Control Arm Bushing (Part No.AVB0453)

Lemfoerder – OE Replacement Control Arm (Part No.L2000278094LEM)

Autopart International Inc – Control Arm (Part No.L20002005720API)

MOOG – CONTROL ARM BUSHING (Part No.K202141)

MOOG – CONTROL ARM BUSHING (Part No.K202140)

Whiteline – Control Arm Lower Rear Outer Bushing (Part No.W63554)

Whiteline – Control Arm Lower Front Outer Bushing (Part No.W63552)

Whiteline – Control Arm Upper Inner Bushing (Part No.W63549)

TRW – Control Arm Bushing (Part No.L2030183533TRW)

Rare Parts – Control Arm Bush (Part No.RP16003)

Dorman – Suspension Control Arm Bushing (Part No.533-691)

Lemfoerder – Control Arm Bushing (Part No.L2030183533LEM)

Dorman – Suspension Trailing Arm (Part No.522-781)

Dorman – Suspension Trailing Arm (Part No.522-782)

Whiteline – Trailing Arm Front Bushing (Part No.W0504)

Lemfoerder – Tie Rod (Part No.L2000384941LEM)

Rein – Bushing (Part No.AVB0358R)