2006 Audi A3 Quattro Engine Parts

Below you will find various in-demand Audi Engine Parts, components and accessories for your 2006 A3 Quattro. Advance Auto Parts has popular A3 Quattro parts like Engine Mounts, Engine Gaskets and Seals, Engine Timing Parts and more. You’ll also find aftermarket and OEM Engine Parts for other A3 Quattro model years including 2013, 2015, 2016, 2017, 2018, 2019, 2020, 2022, 2023 and more. Select a category of 2006 Audi A3 Quattro Engine Parts below and start saving instantly.

Popular 2006 Audi A3 Quattro Engine Parts Categories

Engine Variable Timing Solenoids

Valve Cover Gaskets

Engine Timing Chain Kits

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Engine Mounts

Oil Pans

Engine Oil Cooler Accessories

Computer Control Relays

Cylinder Head Gaskets

Crankshaft Seals

Oil Caps

Timing Chain Tensioners

Engine Oil Cooler Seals

Engine Valve Stem Seals

Oil Level Sender Gaskets

Crankshaft Washers

Engine Oil Cooler Line O-Rings

Engine Valve Locks

Engine Oil Pump Chain Rails

Fuel Tank Sending Unit Gaskets

Engine Cradle Insulator

Camshaft Lubes

Engine Oil Cooler Nut

Essential Engine Parts for 2006 Audi A3 Quattros

from

$32.21

Timing Cover Seal

from

$9.12

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$2.19

EXHAUST NUT

from

$36.35

Timing Guide Rail

from

$9.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$128.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium oil pans meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE expertise
Durable powder coating applied to exterior of oil pan for a long lasting rust free unit
Washed and then sealed with an anti-corrosive spray on the interior for a rust free unit at installation
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Road tested to ensure real world performance and to verify that each design meets our high standards for quality
Coating salt spray tested for over 200 hours to insure durability

from

$3.14

Valve Keeper

from

$113.61

All Febi oil coolers are manufactured to meet OE specifications and depending on application are provided with a built-in thermo bypass, and/or pressure bypass.

Product Features:

Meets or exceeds OE specifications
Manufactured using advanced lightweight materials
Low weight and design space requirements
OE Style connections

from

$30.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$24.67

TRW Engine Components is a recognized developer of valves and valve train components. A wide range of materials and material combinations are used to meet the engineering requirements in the different engine applications. Materials vary from ferritic martensitic steels (intake valves) and austentic CrMn based steels to extreme heat and corrosion resistant Nickel base super alloy for exhaust valves. To improve wear and corrosion resistance, valves can be chromium plated or nitrided. These coatings are used to improve the compatibility of the valve stem surface to the valve guide material. If necessary, exhaust valves (and in some cases also intake valves) can be hard-faced. In hard-facing, a more heat and wear resistant material is welded to form the valve seat. Seat hard-facing extends the valve life significantly.

Product Features:

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$40.99

The torque arm assists in controlling the engine and drivetrain forward and aft twisting motion. The torque arm is inherently soft due to the high compliance rubber bushing design and was built for comfort and not responsiveness or feel. Whiteline’s torque arm mount bushing is built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilising low compliance bushing technology this eliminates the slop, twisting and shudder found in the OEM rubber bushings allowing for a faster, positive, responsive feel of power delivery on and off the throttle.

Product Features:

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new purchase .

from

$24.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$61.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$28.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments.

Product Features:

Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$82.93

Metaloflex Cylinder-head Gaskets Elring cylinder-head gaskets are high-tech components used in modern combustion engines. As key components, they help to ensure that engines run efficiently, reliably and economically. Developed by ElringKlinger, Metaloflex is a globally recognized brand of innovative metal layer cylinder-head gaskets made of beaded, elastomer-coated spring steel layers. Multilayer steel cylinder-head gaskets are available in various bead designs and with a different number of layers, depending on the OE specification of the respective car manufacturer. Metaloflex gaskets may be of single or multi-layer design depending on the application. Thanks to the modular design elements, this sealing system can be individually adapted to suit the requirements of the specific engine. This technology avoids the need for time-consuming, costly iterative processes whilst guaranteeing maximum engine design flexibility.

Product Features:

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$141.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$9.11

Oil Level Sender O-R

from

$53.72

The INA Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision tension assembly
OE specified guide rail when supplied
Durable long life performance

from

$13.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$1.78

Water Temperature Sensor O-Ring

from

$6.67

FUEL PUMP TANK SEAL

from

$113.99

Made In USA. Melling engine assembly lube, MELL-LUBE, is formulated to be an initial lubricant on camshaft metal surfaces as well as related valve train parts. The added zinc material (1400 ppm) provides MELL-LUBE with added protection to prevent scoring and galling during initial engine start-up for both newly rebuilt and / or remanufactured engines. In addition, MELL-LUBE contains corrosion inhibitors to prevent rust and pitting of components. MELL-LUBE mixes with any engine oil and will not clog filters. Melling recommends MELL-LUBE be a part of every camshaft install.

from

$14.35

Cam Follower

from

$2.37

Freeze Plug

from

$35.93

Glyco advanced engine bearing technologies withstand heavy loads and cope with the increasingly challenging conditions of modern, environmentally-friendly engines. Glyco is the world’s largest manufacturer of OE-quality bearings. Every year, our engine bearings are fitted on more than 10 million engines around the world – from small bore engines to heavy-duty commercial vehicles and stationary engines. Driven by the need to reduce CO2 emissions, today’s engines extract more power from less fuel. Due to the increased temperature and load, conventional bearings struggle to cope. Thanks to over 100 years of innovation, Glyco provides bearings with advanced metallurgy that can withstand these challenges. Federal-Mogul invented Glyco Sputter Bearings with twice the service life of conventional bearings. We developed Glyco G-188, the first intelligent bearing material, and were also first to launch a full lead-free material portfolio. Recent innovations include the highly durable Glyco IROX bearing shells, which address the challenges of hybrid, stop-start and downsized engines.

Product Features:

Original Equipment Quality
Excellent wear resistance
Low propensity to seize
Reduction in Friction

from

$385.78

Febi’s partner for engine timing is the renowned chain specialist IWIS. The German company is market leader in the timing chain sector and renowned for the top quality of its products. IWIS supplies timing chains for all Febi kits. Febi manufactures the remaining components for the timing chain kits to OE quality at its headquarters in Ennepetal. High quality parts are particularly important in engine timing to avoid costly engine damage. febi bilstein gives a 5-year or 100,000 km quality guarantee with its timing chain kits (subject to use of the correct engine oil recommended by the manufacturer). Febi timing chain kits contain all wear parts required for a high quality repair of the chain drive. To ensure a long engine life, all components of the timing chain kit should be replaced.

Product Features:

Contains everything you need to replace an engine timing chain in your vehicle
Offering the quality, reliability, and durability of OE
Manufactured to OE specification for fit, form, and function

from

$51.35

The Vaico Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

Upgrade your 2006 Audi A3 Quattro with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2006 Audi A3 Quattro, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Audi or enhancing its overall performance, Engine Parts are key to keeping your A3 Quattro functioning at its best. At Advance Auto Parts, we offer a wide selection of 60 Engine Parts for the 2006 Audi A3 Quattro, designed to meet your needs without breaking the bank. From Engine Mount replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2006 Audi A3 Quattro at great prices. Our Engine Parts inventory for this model ranges from just $1.78 to $386.99, with an average price of $58.25. Our 60 Engine Parts in stock come from 27 trusted brands, so you’re sure to find the right part for your 2006 Audi A3 Quattro without overspending.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2006 Audi A3 Quattro is always ready to roll. We’re committed to providing you with everything you need to keep your A3 Quattro in top shape, all in one place. Start shopping confidently below for your 2006 Audi A3 Quattro!

Best-Selling Engine Mounts for 2006 Audi A3 Quattros

Enhance the driving experience in your Audi with 7 quality Engine Mount components, starting at $34.99.

show more show less

from

$59.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 04-18; SEAT 08-13; VW 05-21;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2004-2021
Weight approx: 1 Lbs
ENGINE CRADLE
BOLTS THROUGH TORQUE STRUT REAR END
BOLT HOLE: NO THREADS

from

$34.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to AUDI 06-13; SEAT 08-19; VW 05-18;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2005-2019
Weight approx: 1 Lbs
ENGINE CRADLE
HEIGHT: 1.42 INCH / 36 MM
BOLTS THROUGH TORQUE STRUT REAR END
BOLT HOLE: THREADED

from

$160.99

Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.

from

$130.50

Engine Mount

from

$51.35

The Vaico Subframe Mount is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$40.99

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
Install guide included providing detailed instructions on how to install your new purchase .

from

$40.99

Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.

Most Popular 2006 Audi A3 Quattro Engine Gaskets and Seals

Customize your Audi with 11 Engine Gaskets and Seals products like Valve Cover Gaskets, Rear Main Seal Sets, and Engine Valve Stem Seals, all priced under $61.99.

show more show less

from

$33.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$61.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$9.11

Oil Level Sender O-R

from

$54.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$43.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

RIGHT TYPE — Valve stem seals designs are application-specific for the repair occasion using either deflector (umbrella) seals, O-ring style or positive seals
QUALITY MATERIALS — Each valve stem seal features materials based on the specific application for your vehicle repair
ENGINEERING EXPERTISE — Parts are reviewed, validated and approved by Fel-Pro engineers through rigorous research, development and testing
INSTALLATION AID — Installation tool included to protect inner lip of seal from damage during seal installation
COVERAGE — Available for domestic and foreign nameplate vehicles

from

$41.15

Oil Pan Gasket

from

$44.23

OE identical sealing solutions for the aftermarket The Elwis brand is synonymous with consistently high quality, outstanding delivery performances and – most importantly – innovative sealing solutions to the automotive aftermarket. Elwis unrivalled expertise in the field of advanced sealing solution engineering and management is passed on to our automotive aftermarket customers in the form of superb pricing, reliability and performance. All Elwis parts perform at least identically to their original counterparts.

Product Features:

OE Identical quality
Outstanding delivery performance
Innovative sealing solution

from

$39.22

Gasket Maker

from

$23.49

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$9.12

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$6.67

FUEL PUMP TANK SEAL

Top Picks for 2006 Audi A3 Quattro Engine Timing Parts

Upgrade Audi A3 Quattros with top-quality Engine Timing Parts parts, including 6 OEM and aftermarket selections for your 2006 model.

show more show less

from

$385.78

Contains everything you need to replace an engine timing chain in your vehicle
Offering the quality, reliability, and durability of OE
Manufactured to OE specification for fit, form, and function

from

$329.59

The Vaico Variable Valve Timing (VVT) Solenoid is the Solenoid responsible for changing the position of the camshaft in the engine. It works by altering the supply of oil pressure to the camshaft and can either advance or retard camshaft position to provide the right performance. The Vaico Variable Valve Timing (VVT) Solenoid produce fewer emissions, improves gas mileage by controlling intake and exhaust valve timing and increase cylinder-air-supply to generate maximum horsepower.

Product Features:

High-quality O-rings and gaskets prevent premature oil leaks and help to maintain oil pressure
Improved steel components limits sticking during oil sludge buildup
100% quality control and end-of-line testing

from

$207.29

Camshaft Adjuster So

from

$53.72

The INA Timing Chain Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision tension assembly
OE specified guide rail when supplied
Durable long life performance

from

$31.36

Timing Guide Rail

from

$16.36

Timing Guide Rail

In-Demand Valve Cover and Cylinder Heads for 2006 Audi A3 Quattros

Select from 9 premium Valve Cover and Cylinder Heads parts for your 2006 Audi A3 Quattro, with prices ranging from $3.14 to $94.99.

show more show less

from

$93.24

Produced from spring steel for long-lasting flexibility of beads
Thermal stability up to 600F
Full or partial FPM surface coverage of head and block layer for micro-sealing of liquids and combustion gas – extended service life
Heat treatment of functional layers further enhances gasket durability and this technology is exclusively applied to ElringKlinger metal gaskets
Tightening instructions provided with each gasket for perfect results

from

$3.14

Valve Keeper

from

$94.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift

from

$26.70

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$24.67

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$17.58

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$14.57

OE Quality
Optimized for strength
Heat and corrosion resistant
Chromium plated or nitrided
Stem optimized to resist wear

from

$4.90

Cylinder Head Bolt

from

$3.14

Valve Keeper

Most Sold 2006 Audi A3 Quattro Camshafts

Explore our best-selling Audi parts for the 2006 A3 Quattro among 7 OEM and aftermarket options starting from $6.92.

show more show less

from

$44.99

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$27.77

Camshaft Position Se

from

$113.99

from

$43.30

Camshaft Position Se

from

$14.35

Cam Follower

from

$13.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$6.92

Cam Follower

FAQs for 2006 Audi A3 Quattro Engine Parts

Which Engine Parts are best-sellers for 2006 Audi A3 Quattros?

Out of 60 Engine Parts that fit 2006 Audi A3 Quattros, the following parts are the top sellers:

Engine Mount: Rear, 1 Piece (20300934) – $59.99
Engine Oil Fill Cap (11438468) – $15.99
Engine Mount: Rear, 1 Piece (20300922) – $34.99

What’s the price range for 2006 Audi A3 Quattro Engine Parts?

Engine Part prices for the 2006 Audi A3 Quattro start at $1.78 and go up to $386.99 for the most premium parts.

What’s the average price of a Engine Part for a 2006 Audi A3 Quattro?

The average price for Engine Parts for the 2006 Audi A3 Quattro is $58.25. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Audi A3 Quattro model years?

Yes, we currently carry Engine Parts for 16 model years of Audi A3 Quattros between 2007 and 2024. Engine Parts are bought most frequently for the following model years: 2023, 2022, 2020, 2019, 2018, 2017, 2016, 2015, and 2013.

What are the cheapest Engine Parts for my 2006 Audi A3 Quattro?

The cheapest 2006 Audi A3 Quattro Engine Parts we carry in stock are:

Water Temperature Sensor O-Ring (10747339) – $1.78
EXHAUST NUT (11261448) – $2.19
Freeze Plug (10727581) – $2.37
Valve Keeper (11999138) – $3.14
Valve Keeper (10728889) – $3.14

What are the top-rated Engine Parts that fit the 2006 Audi A3 Quattro?

Out of 5 reviews by customers, our 2006 Audi A3 Quattro Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2006 Audi A3 Quattro and their top-rated products:

Valve Cover and Cylinder Heads
- Cylinder Head Gasket Set (10741996) – $93.24
Engine Gaskets and Seals
- Cylinder Head Gasket Set (10741996) – $93.24

What types of Engine Parts do you sell for my 2006 Audi A3 Quattro?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2006 Audi A3 Quattro:

Can I get help with 2006 Audi A3 Quattro Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Audi Engine Parts and more.

What is your return policy for Audi A3 Quattro Engine Parts?

Advance Auto Parts keeps returns simple. For new Audi A3 Quattro Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2006 Audi A3 Quattro Engine Parts

Mahle – Timing Cover Seal (Part No.A50691194359MAH)

Elring – Elring Oil Cooler Seal (Part No.A631088467ELR)

Febi – EXHAUST NUT (Part No.H1001570904FEB)

Febi – Timing Guide Rail (Part No.A5040160248FEB)

Victor Reinz – Engine Oil Cooler Gasket (Part No.71-34189-00)

Spectra Premium – Engine Oil Pan (Part No.VWP24A)

KS – Valve Keeper (Part No.A407084736KS)

Febi – Oil Cooler (Part No.A6070385019FEB)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71074-1)

TRW – TRW Exhaust Valve (Part No.A4050186570TRW)

Whiteline – Trans Mount Insert (Part No.KDT968)

Carquest Premium – Ignition Relay (Part No.RAA1926)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 51366 R)

Carquest Premium – Camshaft Sensor (Part No.CSC1138)

Elring – Cylinder Head Gasket Set (Part No.A8100495450ELR)

Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVC1116)

Elring – Oil Level Sender O-R (Part No.A6081174889ELR)

INA – Timing Chain Tensioner (Part No.A5110284296INA)

Felpro – CAMSHAFT FRONT SEAL SET (Part No.TCS 46183)

Febi – Water Temperature Sensor O-Ring (Part No.C606032192FEB)

MTC – FUEL PUMP TANK SEAL (Part No.E3004321573MTC)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Kolbenschmidt – Cam Follower (Part No.A4010420928KS)

Febi – Freeze Plug (Part No.A1030322873FEB)

Glyco – Glyco Thrust Bearing Set (Part No.A2130170762GLY)

Febi – FEBI Timing Chain Kit (Part No.A5060846599FEB)

Vaico – Subframe Mount (Part No.L1005440421VCO)

Anchor – Engine Mount: Rear, 1 Piece (Part No.9260)

Anchor – Engine Mount: Rear, 1 Piece (Part No.9263)

Whiteline – Engine Pitch Mount Bushing (Part No.KDT977)

Autopart International Inc – Engine Mount (Part No.A70001993423API)

Vaico – Subframe Mount (Part No.L1005440421VCO)

Whiteline – Trans Mount Insert (Part No.KDT968)

Whiteline – Engine Torque Arm Bushing (Part No.KDT914)

National – Multi Purpose Seal (Part No.716102)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 51366 R)

Elring – Oil Level Sender O-R (Part No.A6081174889ELR)

National – Shaft Repair Sleeve (Part No.99333)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 71074-3)

Ajusa – Oil Pan Gasket (Part No.A6130860493AJU)

Elwis Royal – Elwis Valve Cover Gasket (Part No.A8030120579ELW)

Elring – Gasket Maker (Part No.3K2003330627ELR)

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-31306-05)

Elring – Elring Oil Cooler Seal (Part No.A631088467ELR)

MTC – FUEL PUMP TANK SEAL (Part No.E3004321573MTC)

Febi – FEBI Timing Chain Kit (Part No.A5060846599FEB)

Vaico – Camshaft Solenoid Ad (Part No.A5132810968VCO)

Autopart International Inc – Camshaft Adjuster So (Part No.A51322973604API)

INA – Timing Chain Tensioner (Part No.A5110284296INA)

Febi – Timing Guide Rail (Part No.A5040160243FEB)

Febi – Timing Guide Rail (Part No.A5040160242FEB)

Elring – Cylinder Head Gasket Set (Part No.A8100134860ELR)

TRW – Valve Keeper (Part No.A4070774061TRW)

Felpro – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.26648 PT)

TRW – TRW Exhaust Valve (Part No.A4050186568TRW)

TRW – TRW Exhaust Valve (Part No.A4050186570TRW)

TRW – TRW Intake Valve (Part No.A4060134874TRW)

TRW – TRW Intake Valve (Part No.A4060134871TRW)

Febi – Cylinder Head Bolt (Part No.A3030160256FEB)

KS – Valve Keeper (Part No.A407084736KS)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1528)

WSO – Camshaft Position Se (Part No.A4015185826WSO)

Melling – Stock Replacement Engine Assembly Lubricant (Part No.M-10012G)

Delphi – Camshaft Position Se (Part No.A4015185826DEL)

Kolbenschmidt – Cam Follower (Part No.A4010420928KS)

Felpro – CAMSHAFT FRONT SEAL SET (Part No.TCS 46183)

INA – Cam Follower (Part No.A4010420928INA)