from

$58.33

P/S Reservoir

from

$19.15

LEMFORDER a division of ZF Worldwide is a leading original equipment manufacturer and supplier of high quality automotive steering and suspension components. This steering rod is referenced to vehicles with the product plate code mark of “5”. The product plate is located on the driver’s side wheel well. Check the 5th line of the plate for the last digit to the right of the divider to look for the correct steering gear code mark.

from

$19.83

Steering Rack Boot Kit

from

$243.99

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

100% replacement of rubber sealing components.
Application of specialized lubricant(s) for extended life.
Finished in protective coating to prevent corrosion and rust.
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

from

$468.73

Steering Rack

from

$21.59

P/S RESERVOIR CAP

from

$14.49

Covered in black Hypalon

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$10.49

Steering Rack Stop

from

$8.86

Steering Rack Stop

from

$8.38

Steering Rack Stop

from

$225.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$350.80

Since its founding in 1987 Maval Manufacturing has been a world leader in the remanufacturing of power rack and pinion systems and related components. Trusted by Original Equipment Service Organizations and Global Distributors alike, Maval has consistently delivered the finest Remanufactured Rack and Pinions, Gear Boxes, and Power Steering Pumps to customers around the globe. Applying OE-experience and standards results in a remanufactured power steering pump that offer like-new quality and dependability.

Product Features:

OEM-Quality and Direct Fit replacement
Components are inspected and cleaned of rust and corrosion.
Shaft and internal surfaces are inspected, reconditioned and polished.
Seals and O-rings are replaced with new, OE-equivalent parts.
Assembled units are 100% functionally tested for leaks and performance.

from

$380.83

Remanufactured Bosch power steering pumps designed for an optimum performance and direct replacement of the original equipment. Bosch range offers both electric and mechanical pumps. Remanufacturing at Robert Bosch Automotive Steering includes all those products which we produce new and supply to vehicle manufacturers as original equipment. Renovation is carried out in accordance with a strictly defined process. All seals, synthetic and plastic parts are replaced 100%. Other parts which do not fall within the tolerance limits of series production are likewise replaced with new spare parts from the production line. The remanufactured units undergo extensive testing on the test rig before being released for delivery. This process ensures that all remanufactured products are of the same quality as those from the production line.

Product Features:

Designed to minimize power consumption
Seals, synthetic and plastic parts are replaced 100%
Capable to deliver high capacity pressures for all driving demands
Undergos extensive testing
Highly efficient design and manufacture from the OE know how

from

$22.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$21.76

Burgaflex is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.

Product Features:

Manufactured as a direct OE replacement
Pressure tested to maintain a consistent flow

from

$199.99

Rein power steering hoses are manufactured with premium OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium OE quality hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$2.99

OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.

from

$108.99

Power Steering Return Hose

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$77.99

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion
Heat/abrasion tubing protects vital areas
Restrictor helps absorb vibration and reduce noise

from

$244.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$219.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.

from

$174.99

Rein power steering hoses are manufactured with premium ContiTech OE quality hose material designed to withstand the high pressure demands of automotive power steering systems. Rein power steering hoses are designed to resist excessive heat, oil and ozone factors that breakdown rubber and cause premature failure in power steering systems.

Product Features:

Manufactured with premium ContiTech hose which offers maximum protection from premature failures.
Designed as direct-fit replacements to ensure trouble-free proper installation.
Complete with hardware and seals when necessary for installation to save installation time and additional costs.
Restores your vehicle to safe and optimal performance levels.
Replacing both pressure and return hoses together ensures optimal performance and safety levels.