2005 Volkswagen Jetta Wheels and Tires
More 2005 Volkswagen Jetta Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2005 Volkswagen Jetta, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2005 Volkswagen Jetta Wheels and Tires
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Driveworks – Oil Seal (Part No.S-225110)
from
$7.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Dorman – 16 x 6.5 In. Steel Wheel (Part No.939-116)
from
$118.99
Damaged your wheel, or looking to upgrade? This wheel is specifically designed to directly replace the original wheel on certain vehicle applications. It is thoroughly tested to meet safety standards for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel is designed to match the fit and structural appearance of the original wheel on specific vehicle years, makes and models
- Cost-effective solution – offers original equipment quality and appearance for a competitive price
- Thoroughly tested – dynamic radial testing, radial run-out testing, and axial run-out testing ensures performance
- Trustworthy quality – backed by team of designers and engineers in the United States
Dorman – Wheel Bearing Retaining Ring (Part No.933-940)
from
$12.79
This wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications
- Restores functionality – this retaining ring is made to fit and fully restore part functionality after the original ring fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Tapered Cup Wheel Bearing Assembly (Part No.S-LM-29710)
from
$7.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Meyle – Wheel Bearing Dust C (Part No.K7005384018MEY)
from
$5.34
The Meyle Wheel Bearing Dust Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Rein – Wheel Bolt (Part No.HWB0011)
from
$3.29
Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.
Product Features:
See More
Product Features:
- Wheel bolt is produced by an OE manufacturer
- Packaged in convenient quantities.
- Direct replacement for correct fitments
- Manufactured to strict engineering standards/specifications in materials and tolerances
Dorman – Wheel Bolt: M12-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Silver, 1 Pack (Part No.610-249.1)
from
$7.99
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
MOOG Hub Assemblies – Suspension Knuckle Assembly (Part No.LK007)
from
$399.99
Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
- EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
- CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
- STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28018)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28175)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
Febi – Premium Hub Mounting Bolt Engineered to Ensure Optimal Wheel and Hub Connection (Part No.K7036444473FEB)
from
$3.54
Premium Hub Mounting Bolt Engineered to Ensure Optimal Wheel and Hub Connection
Dorman – Plastic Center Cap (Part No.909-130)
from
$22.99
This wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this wheel cap is designed to match the fit, appearance and function of the original cap on specified vehicles
- Restores functionality – reliable replacement for an original cap that is missing or damaged due to collision
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Wheel Lug Nut Cover: Push Type, 21 mm Depth, Plastic, Black, 1 Pack (Part No.611-644.1)
from
$1.49
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513253)
from
$221.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- DAMAGE RESISTANCE — Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-B-35)
from
$26.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Driveworks – Wheel Hub (Part No.930-804)
from
$63.99
Tough One Wheel Hubs are designed to meet or exceed original equipment (OE) standards in form, fit and function. These wheel hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of Tough One Wheel Hubs. Wheel Hubs come with wheel studs, bearings are not included.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Wheel Hub (Part No.930-800)
from
$46.49
DRIVEWORKS Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hubs.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
Dansk – Brake Dust Shield (Part No.N1086945738DSK)
from
$27.20
Brake Dust Shield
Autel – Adjustable Angle Programmable Universal TPMS Sensor Metal – 315MHz and 433MHz (Part No.300030)
from
$43.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor Bulk Box (20) (Part No.300010)
from
$462.99
The MX-Sensor 1-Sensor Bulk Box has 20 individually bagged, programmable universal TPMS sensors. The 1-Sensor features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (20) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Programable IntelliSens TPMS with Bartec and ATEQ Program tools; 315MHz (Part No.UVS3041)
from
$47.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- 315 MHz TPMS Universal with rubber valve
- Programmable – Only take 3 seconds to configure to specific application
- Always up-to-date with the new programming function via the TPMS diagnostic tool
- Covers multiple applications with one OE equivalent sensor
- Reprogrammable and Copy Clone Capable
- Have WAL technology for locating tire positon
- Supported by Bartec, ATEQ, Snap On, NAPA, Matco and Corghi TPMS Diagnostic tools
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – TPMS Sensor Service Kit (Part No.20017)
from
$2.99
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dill Air Control – TPMS Service Kit: Orange Color Coded Service Kit For Select Models, 25 Piece (Part No.1030K)
from
$8.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Orange Kit for Audi & Volkswagen
Dill Air Control – TPMS Service Kit: Diamond Stripe Color Coded Service Kit, 25 Piece (Part No.7020K)
from
$5.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Diamond Striped Kit for Clamp-in REDI-Sensors and many OE vehicles
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.B-35)
from
$57.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST — Advanced heat treatment process for strength
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.512336)
from
$165.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.510003)
from
$71.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST- Advanced heat treatment process for strength, and a stainless steel flinger protects the seal and helps extend the bearing life.
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Popular 2005 Volkswagen Jetta Wheels and Tires Categories
2005 Volkswagen Jetta Wheels and Tires
You count on your 2005 Volkswagen Jetta to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 54 Wheels and Tires ranging in price from $1.49 to $7,321.99, you’re sure to find everything you need for your 2005 Volkswagen Jetta.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 15 different brands like Autel, Schrader, and Dorman. 2005 Volkswagen Jetta Wheels and Tires start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 1,500 extensive product reviews on 2005 Volkswagen Jetta Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Bearing: Direct Fit, 1 Piece with 4.1 stars and Wheel Hub Assembly with 3.7 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2005 Volkswagen Jetta below to get started!
Top-Rated Wheels and Tires Brands For Your 2005 Volkswagen Jetta
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2005 Volkswagen Jetta running right for years to come. In our inventory you’ll find brands like Autel, Schrader, Dorman, and even more.
Popular Dorman – Pik-a-Nut Wheels and Tires
You’ll find popular Dorman – Pik-a-Nut brand products across Wheel Hardware and Wheel Spacers. All are waiting to get your 2005 Volkswagen Jetta back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:
from
$4.29
(4)
Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Black, 1 Pack
Wheel Bolts
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 2005 Volkswagen Jetta, and some of our most reviewed parts include:
from
$41.99
(70)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Remote Tire Pressure Sensors
FAQs for 2005 Volkswagen Jetta Wheels and Tires
What are the most purchased Wheels and Tires for the 2005 Volkswagen Jetta?
Out of 54 Wheels and Tires for the 2005 Volkswagen Jetta, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Remote Tire Pressure Sensors
What are the top-rated 2005 Volkswagen Jetta Wheels and Tires?
Top-rated Wheels and Tires for your 2005 Volkswagen Jetta based on customer reviews/ratings are:
from
$40.99
(19)
Wheel Bearing: Direct Fit, 1 Piece
“install was ez and made a big difference. no more noise in the front end”
from
$71.99
(13)
Wheel Bearing: Direct Fit, 1 Piece
“These bearings are not the easiest to replace. It is important how the bearing is supported when pressing in the hub and tightening the cv shaft nut t”
