2005 UD Car Parts

The Monroe Magnum shock absorber for class 3-6 vehicles is gas-charged for quicker response and a stable, more comfortable ride. Designed to handle the demands of high mileage and severe use vehicles, replace worn-out units with Magnum shocks to help reduce excessive vibration.

Product Features:

• FOR HARDWORKING COMMERCIAL VEHICLES   – Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
• FOR HARDWORKING COMMERCIAL VEHICLES áá- Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
• CONSISTENT RIDE – All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while 2-in. or 2-1/4-in. reserve tube holds more fluid to improve performance (when required)
• EXCEPTIONAL HANDLING – 10-Stage valving, tuned specifically to each vehicle, adjusts to road extremes while the larger 1-3/8-in. bore provides more efficient damping control to provide consistency and a smooth ride (most applications)
• STRONG AND DURABLE – Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360 Deg. for durability
• BUILT TO LAST – Robust hydraulic lock-out prevents over extension of air bags, top-out of the piston and averts damage to seal assembly (on most applications)
• LONGER SERVICE LIFE – Bearing with PTFE coating reduces friction between rod and rod guide combined with nitrocarburized piston rod provides durability and longer service life (most applications)
• REDUCED NOISE, VIBRATION AND HARSHNESS – Delivers exceptional control and isolates impact-related noise, vibration, and harshness under most driving conditions
• IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• BUY WITH CONFIDENCE – Comes with Monroe’s 90-day Risk Free Ride Offer and Limited Commercial Warranty
• All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction

The Monroe® Magnum® shock absorber for class 3-6 vehicles is gas-charged for quicker response and a stable, more comfortable ride. Designed to handle the demands of high mileage and severe use vehicles, replace worn-out units with Magnum® shocks to help reduce excessive vibration.

Product Features:

• FOR HARDWORKING COMMERCIAL VEHICLES   — Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
• FOR HARDWORKING COMMERCIAL VEHICLES áá– Designed to handle the demands of high mileage and severe use class 3-6 trucks and buses
• CONSISTENT RIDE — All-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown while 2-in. or 2-1/4-in. reserve tube holds more fluid to improve performance (when required)
• EXCEPTIONAL HANDLING — 10-Stage valving, tuned specifically to each vehicle, adjusts to road extremes while the larger 1-3/8-in. bore provides more efficient damping control to provide consistency and a smooth ride (most applications)
• STRONG AND DURABLE — Shouldered bushing and bonded bushing with sleeve protects from bushing walkout for improved quality; arc welds up to 360 Deg. for durability
• BUILT TO LAST — Robust hydraulic lock-out prevents over extension of air bags, top-out of the piston and averts damage to seal assembly (on most applications)
• LONGER SERVICE LIFE — Bearing with PTFE coating reduces friction between rod and rod guide combined with nitrocarburized piston rod provides durability and longer service life (most applications)
• REDUCED NOISE, VIBRATION AND HARSHNESS — Delivers exceptional control and isolates impact-related noise, vibration, and harshness under most driving conditions
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• BUY WITH CONFIDENCE — Comes with Monroe’s 90-day Risk Free Ride Offer and Limited Commercial Warranty
• All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction

Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.

Product Features:

• Smoother operation with less slippage and wear for excellent belt life and reduced pulley wear.
• High-quality rubber compound protects the belt against heat, ozone and sunlight
• The Flex-Weave coating is a patented fabric construction that protects the belt core from oil, contaminants and heat, extending the life of the belt.
• Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
• Meets RMA oil and heat resistant standards and static conductivity requirements
• Temperature Range: -22 Deg. F to +140 Deg. F (+30 Deg. C to +60 Deg. C)
• NOTE: Available in sections A, B, C, D and E as well as Hi-Power II PowerBand V-belts.

The Dayco industrial V-belt is more energy-efficient because it is more flexible. This Dayco belt offers the highest horsepower rating for longer service while its raw edge design resists slippage even at low-drive tensions. Designed for smaller more compact drives, Dayco industrial V-belts offer excellent oil and heat resistance, flexibility and static dissipation. Its special design allows for more efficient load carrying and higher horsepower capabilities.

Product Features:

• Features high grade engineered polymer compounds to help resist heat, oil, and grease.
• Reliable performance over an extremely wide range of horsepower and RPM applications
• Manufactured to OEM specifications

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Suitable for all industrial applications, including v-flat drives.

Product Features:

• Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
• High-quality rubber compound protects the belt from heat, ozone and sunlight
• The patented Flex-Weave cover is made of a proprietary fabric that protects the belt core from oil, contaminants, and heat to extend its life.
• Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
• Meets RMA standards for oil and heat resistance and static conductivity requirements
• Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
• NOTE: Available in A, B, C, D, and E cross-sections, as well as High Power PowerBand V Belts II

Product Features:

• Optimized components engineered for maximum strength and durability
• Patented design provides superior belt alignment and tension for improved drive efficiency and life
• Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
• Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
• Double row bearings carry more load and last up to 3X longer than two individual bearings
• Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
• Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components

This Heavy duty belt tensioner is manufactured by one of the largest original equipment tensioner suppliers to ensure proper fit and performance. This tensioner is produced for serpentine belt routing applications and is made of high strength steel for improved life and durability. As with the original equipment part, this replacement tensioner fits 05-07 Hino ND238, ND258, NE268, NJ268, NV338 / UD Nissan 7.6L Diesel (J08E-TA and J08E-TB Engine) / MD 230 Diesel. The tensioner maintains the O.E. round spring technology as well as the internal damping design specified for this application. This part comes equipped with Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material provides optimal performance at prolonged extreme operating temperatures.
• Construction resists cracking and wear, even at extreme temperatures
• Special compound provides unmatched flexibility, stability, load capacity and belt life
• A problem-solving tool designed for the toughest applications
• Consistently outperforms other heavy-duty coil belts on the market
• Engineered to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

• Specifically-engineered materials resist collapse under vacuum
• Engineered to resist electrochemical degradation, the leading cause of hose failure
• Pre-shaped to fit and to ensure perfectly sealed conditions
• EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
• Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
• Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
• Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
• Caution: Do not use for fuel or oil transfer applications

Product Features:

• Smoother operation with less slippage and wear for excellent belt life and reduced pulley wear.
• High-quality rubber compound protects the belt from heat, ozone and sunlight
• Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
• Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
• Meets RMA oil and heat resistant standards and static conductivity requirements
• Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
• NOTE: Available in sections A, B, C, D and E as well as Hi-Power II PowerBand V-belts.